http://www.odeo.com/channels/2104011-Handyguys-Podcast handyguys no The Handyguys are two avid DIYers sharing their experiences working around the house. Our podcast feature answers to your questions, head-to-head tool tests and other DIY and home improvement topics. If you have a question regarding your home, let us know using the contact tab on our site or call us at (615) 676-0877. We respond to all questions and may use your question on-the-air in a future broadcast. Our weekly podcasts are posted every Thursday at 5PM Eastern Time. We look forward to answering your questions and helping you around the home! The Handyguys are two avid DIYers sharing their experiences working around the house. Our podcast feature answers to your questions, head-to-head tool tests and other DIY and home improvement topics. If you have a question regarding your home, let us know using the contact tab on our site or call us at (615) 676-0877. We respond to all questions and may use your question on-the-air in a future broadcast. Our weekly podcasts are posted every Thursday at 5PM Eastern Time. We look forward to answering your questions and helping you around the home! The Handyguys Podcast en 40 Fri, 13 Nov 2009 15:42:38 -0800 Fri, 13 Nov 2009 15:42:38 -0800 ©The Handyguys Home, Tool Reviews, DIY,, Improvement, Education Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/25448270-Episode-89-%E2%80%93-Fall-Checklist How do you get your house ready for the Winter Season? Win this toolkit. Click on the picture to learn how! Hint: valid use of duct tape wins! Join the Handyguys in a not-so-methodical checklist for the winter season.  This is not your every day handyman (or not so handyperson) checklist.  We have some extras you may not see on other lists. Listen to the podcast as we discuss these items. True Value had all the supplies we needed to get our houses in order. As the days get shorter and darker, it is a good time to check all of your outdoor lights.  Make sure they work. Paul was able to discover these fancy CFLs at our local True Value. They look great don’t you think? Perhaps it is time to install a light with a motion detector to secure your outdoor entrances and windows. Also, you can now get some wife pleasing outdoor CFL lights.  You don’t have to settle on the curly cue CFL bulbs Watch out for leaks and/or water penetration. gutters/downspouts grade flowing toward house cl... How do you get your house ready for the Winter Season? Win this toolkit. Click on the picture to learn how! Hint: valid use of duct tape wins! Join the Handyguys in a not-so-methodical checklist for the winter season.  This is not your every day handyman (or not so handyperson) checklist.  We have some extras you may not see on other lists. Listen to the podcast as we discuss these items. True Value had all the supplies we needed to get our houses in order. As the days get shorter and darker, it is a good time to check all of your outdoor lights.  Make sure they work. Paul was able to discover these fancy CFLs at our local True Value. They look great don’t you think? Perhaps it is time to install a light with a motion detector to secure your outdoor entrances and windows. Also, you can now get some wife pleasing outdoor CFL lights.  You don’t have to settle on the curly cue CFL bulbs Watch out for leaks and/or water penetration. gutters/downspouts grade flowing toward house clear insulation around soffit vents to avoid ice dams Bring in your outdoor furniture Replace the grates and flavor bars on your Grill.  True Value has the parts you need for this. Why not refresh your busted down grill and enjoy a few more cookouts this season. Paul picked up the new flavor bars and grate at True Value. The steaks came from the cow he bought. Winterize your yard tools Seal/weatherstrip and caulk around window and doors and latch those windows for the winter Insulate your unfinished basement.. especially around the rim joist Clean your Dryer Vent before it is too cold to work outside Install some heavy drapes on your windows to stop drafts.  That’ s what they did in the old days. Last chance for pre-winter fertilizer. Final chance for exterior touch up paint Is it time to stain the Deck in the fall?  Isn’t the sun closer to earth in the Winter?  Brian says no.  Paul says yes. Which is it? Disclosure We were one of five bloggers selected by True Value to work on the DIY Squad. We have been compensated for our time commitment to the program and our DIY projects as well as our posts about our experience. We have also been compensated for the materials needed for our DIY project and this giveaway. However, our opinions are entirely our own and we have not been paid to publish positive comments. How do you get your house ready for the Winter Season? Win this toolkit. Click on the picture to learn how! Hint: valid use of duct tape wins! Join the Handyguys in a not-so-methodical checklist for the winter season.  This is not your every day handyman (or not so handyperson) checklist.  We have some extras you may not see on other lists. Listen to the podcast as we discuss these items. True Value had all the supplies we needed to get our houses in order. As the days get shorter and darker, it is a good time to check all of your outdoor lights.  Make sure they work. Paul was able to discover these fancy CFLs at our local True Value. They look great don’t you think? Perhaps it is time to install a light with a motion detector to secure your outdoor entrances and windows. Also, you can now get some wife pleasing outdoor CFL lights.  You don’t have to settle on the curly cue CFL bulbs Watch out for leaks and/or water penetration. gutters/downspouts grade flowing toward house clear insulation around soffit vents to avoid ice dams Bring in your outdoor furniture Replace the grates and flavor bars on your Grill.  True Value has the parts you need for this. Why not refresh your busted down grill and enjoy a few more cookouts this season. Paul picked up the new flavor bars and grate at True Value. The steaks came from the cow he bought. Winterize your yard tools Seal/weatherstrip and caulk around window and doors and latch those windows for the winter Insulate your unfinished basement.. especially around the rim joist Clean your Dryer Vent before it is too cold to work outside Install some heavy drapes on your windows to stop drafts.  That’ s what they did in the old days. Last chance for pre-winter fertilizer. Final chance for exterior touch up paint Is it time to stain the Deck in the fall?  Isn’t the sun closer to earth in the Winter?  Brian says no.  Paul says yes. Which is it? Disclosure We were one of five bloggers selected by True Value to work on the DIY Squad. We have been compensated for our time commitment to the program and our DIY projects as well as our posts about our experience. We have also been compensated for the materials needed for our DIY project and this giveaway. However, our opinions are entirely our own and we have not been paid to publish positive comments. tag:odeo.com,2009-11-13,25448270 Fri, 13 Nov 2009 15:42:38 -0800 no Handyguys Podcast podcast, free, contest, DIY, remodeling, how to, home improvement, giveaway, Decks, handyguys, Handyman, insulation, home inspection, grill, mower, Handyguys Podcast Category, cfl, attic, Energy Savings, yard tools, checklist, True Value, DIY Blog Squad, grill repair, drapes, winterization, weather stripping, winter preperation, water leaks, motion detector, outdoor furniture Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/25408492-Episode-88-%E2%80%93-Furnace-Filters Furnace filters are a critical component of your heating and cooling system. Make sure they are changed regularly. We discuss the myriad of choices in furnace filters in this podcast. The Handyguys group filters into three different categories, good, better and best. Whats best for one person may not be the best for another. The standard filters are good for most people. They permit the furnace to operate as it was designed. When selecting a filter you would typically replace with one equal in size and type to the filter already install on your furnace. This may be a a non-pleated fiber type filter. This type is also the least expensive, costing about $1.50 or $2.00 at the local True Value hardware store. If you desire a replacement filter that has a higher MERV or MPR rating (see below for definitions) there are several choices at True Value. Go into the store with your measurements and pick one out. A higher rated filter will catch and filter more particulates from the air. The hi... Furnace filters are a critical component of your heating and cooling system. Make sure they are changed regularly. We discuss the myriad of choices in furnace filters in this podcast. The Handyguys group filters into three different categories, good, better and best. Whats best for one person may not be the best for another. The standard filters are good for most people. They permit the furnace to operate as it was designed. When selecting a filter you would typically replace with one equal in size and type to the filter already install on your furnace. This may be a a non-pleated fiber type filter. This type is also the least expensive, costing about $1.50 or $2.00 at the local True Value hardware store. If you desire a replacement filter that has a higher MERV or MPR rating (see below for definitions) there are several choices at True Value. Go into the store with your measurements and pick one out. A higher rated filter will catch and filter more particulates from the air. The high end filters will have electrostatic capabilities and can actually filter microscopic bacterias, smoke or other fine particulates from the air. The industry provides ratings for filters. MERV, or Minimum Efficiency Reporting Value, is a number from 1 to 16 that is relative to an air filter’s efficiency. The higher the MERV, the more efficient the air filter is at removing particles. At the lower end of the efficiency spectrum a fiberglass panel filter may have a MERV of 4 or 5. At the higher end, a MERV 14 filter is available. MPR is a term used by 3M and stands for Microparticle Performance Rating. It is actually part of the MERV rating, and measures how efficient an air filter is at capturing particles between 0.3 and 1 micron in size, which make up 99% of the air’s particulate matter. Smoke, bacteria, and smog particles fall within this size range, so if filtering these out of the air is important to you, MPR is a good standard to examine. MPR is used to compare furnace filters to one another, and cannot accurately predict how a furnace filter will actually perform in your particular home environment. The higher the MPR, the more efficient the filter is at capturing these small particles. Lastly – Don’t forget about our contest. We are giving away this awesome toolkit. Check out the details on how you can win by listening to Episode 87 of The Handyguys Podcast. Win this tool kit! Disclosure We were one of five bloggers selected by True Value to work on the DIY Squad. We have been compensated for our time commitment to the program and our DIY projects as well as our posts about our experience. We have also been compensated for the materials needed for our DIY project and this giveaway. However, our opinions are entirely our own and we have not been paid to publish positive comments. Furnace filters are a critical component of your heating and cooling system. Make sure they are changed regularly. We discuss the myriad of choices in furnace filters in this podcast. The Handyguys group filters into three different categories, good, better and best. Whats best for one person may not be the best for another. The standard filters are good for most people. They permit the furnace to operate as it was designed. When selecting a filter you would typically replace with one equal in size and type to the filter already install on your furnace. This may be a a non-pleated fiber type filter. This type is also the least expensive, costing about $1.50 or $2.00 at the local True Value hardware store. If you desire a replacement filter that has a higher MERV or MPR rating (see below for definitions) there are several choices at True Value. Go into the store with your measurements and pick one out. A higher rated filter will catch and filter more particulates from the air. The high end filters will have electrostatic capabilities and can actually filter microscopic bacterias, smoke or other fine particulates from the air. The industry provides ratings for filters. MERV, or Minimum Efficiency Reporting Value, is a number from 1 to 16 that is relative to an air filter’s efficiency. The higher the MERV, the more efficient the air filter is at removing particles. At the lower end of the efficiency spectrum a fiberglass panel filter may have a MERV of 4 or 5. At the higher end, a MERV 14 filter is available. MPR is a term used by 3M and stands for Microparticle Performance Rating. It is actually part of the MERV rating, and measures how efficient an air filter is at capturing particles between 0.3 and 1 micron in size, which make up 99% of the air’s particulate matter. Smoke, bacteria, and smog particles fall within this size range, so if filtering these out of the air is important to you, MPR is a good standard to examine. MPR is used to compare furnace filters to one another, and cannot accurately predict how a furnace filter will actually perform in your particular home environment. The higher the MPR, the more efficient the filter is at capturing these small particles. Lastly – Don’t forget about our contest. We are giving away this awesome toolkit. Check out the details on how you can win by listening to Episode 87 of The Handyguys Podcast. Win this tool kit! Disclosure We were one of five bloggers selected by True Value to work on the DIY Squad. We have been compensated for our time commitment to the program and our DIY projects as well as our posts about our experience. We have also been compensated for the materials needed for our DIY project and this giveaway. However, our opinions are entirely our own and we have not been paid to publish positive comments. tag:odeo.com,2009-11-05,25408492 Thu, 05 Nov 2009 13:58:01 -0800 no Handyguys Podcast podcast, DIY, how to, home improvement, giveaway, virus, smoke, Handyman, filters, energy efficiency, furnace, MPR, bacteria, dust, heating, Handyguys Podcast Category, hvac, 3M, Energy Savings, H1N1, electrostatic, True Value, Blog Squad, DIY Blog Squad, pollen, furnace filters, pleated, MERV, Filtrete Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/25399788-Episode-87-%E2%80%93-Top-10-Essential-Tools-Duct-tape-and-a-Contest In this show The Handyguys discuss their top 10 starter tools and announce a contest to win this toolkit! Win this tool kit! What is included in a first time home buyers tool kit? Screwdrivers of course!  But what else? The Handyguys went shopping at True Value to assemble a quality starter set of essential tools for the typical home owner. Our Kit Includes: The Handyguys will take your questions via the phone at (818) 804-TOOL. Leave an email address if you want an immediate and direct response. Tool Bag Carpenter’s Pencil Speed Square, Orange Pliers Set Screwdriver Set Pry Bar 16-Ounce Claw Hammer Tape Measure Safety Glasses Hearing Protection Utility Knife In the podcast we discuss our rationale for each of the tools and why we picked them. There are certainly other tools that could be added to this list, but this would make a great starter kit. How to win this toolkit! To win this toolkit you must Listen to the podcast for details. Essentially all you need to do it help us... In this show The Handyguys discuss their top 10 starter tools and announce a contest to win this toolkit! Win this tool kit! What is included in a first time home buyers tool kit? Screwdrivers of course!  But what else? The Handyguys went shopping at True Value to assemble a quality starter set of essential tools for the typical home owner. Our Kit Includes: The Handyguys will take your questions via the phone at (818) 804-TOOL. Leave an email address if you want an immediate and direct response. Tool Bag Carpenter’s Pencil Speed Square, Orange Pliers Set Screwdriver Set Pry Bar 16-Ounce Claw Hammer Tape Measure Safety Glasses Hearing Protection Utility Knife In the podcast we discuss our rationale for each of the tools and why we picked them. There are certainly other tools that could be added to this list, but this would make a great starter kit. How to win this toolkit! To win this toolkit you must Listen to the podcast for details. Essentially all you need to do it help us come up with a LEGITIMATE use for duct tape. Give us your duct tape idea by commenting on this show post. In this podcast, we discuss some not so legitimate uses of this ubiquitous tape. We want our listeners to provide us with some valid users of duct tape and we will award the tool kit our favorite suggestion. The winner will be announced December 3rd, 2009. Suggestions after December 3rd are still welcome of course but you will not be in the running for the toolkit.  So leave a comment below and be sure to provide an email address so we can contact you if your duct tape suggestion is our winner. An illegitimate use of duct tape! Photo Submitted by DJ Goodfellow Disclosure We were one of five bloggers selected by True Value to work on the DIY Squad. We have been compensated for our time commitment to the program and our DIY projects as well as our posts about our experience. We have also been compensated for the materials needed for our DIY project and this giveaway. However, our opinions are entirely our own and we have not been paid to publish positive comments. In this show The Handyguys discuss their top 10 starter tools and announce a contest to win this toolkit! Win this tool kit! What is included in a first time home buyers tool kit? Screwdrivers of course!  But what else? The Handyguys went shopping at True Value to assemble a quality starter set of essential tools for the typical home owner. Our Kit Includes: The Handyguys will take your questions via the phone at (818) 804-TOOL. Leave an email address if you want an immediate and direct response. Tool Bag Carpenter’s Pencil Speed Square, Orange Pliers Set Screwdriver Set Pry Bar 16-Ounce Claw Hammer Tape Measure Safety Glasses Hearing Protection Utility Knife In the podcast we discuss our rationale for each of the tools and why we picked them. There are certainly other tools that could be added to this list, but this would make a great starter kit. How to win this toolkit! To win this toolkit you must Listen to the podcast for details. Essentially all you need to do it help us come up with a LEGITIMATE use for duct tape. Give us your duct tape idea by commenting on this show post. In this podcast, we discuss some not so legitimate uses of this ubiquitous tape. We want our listeners to provide us with some valid users of duct tape and we will award the tool kit our favorite suggestion. The winner will be announced December 3rd, 2009. Suggestions after December 3rd are still welcome of course but you will not be in the running for the toolkit.  So leave a comment below and be sure to provide an email address so we can contact you if your duct tape suggestion is our winner. An illegitimate use of duct tape! Photo Submitted by DJ Goodfellow Disclosure We were one of five bloggers selected by True Value to work on the DIY Squad. We have been compensated for our time commitment to the program and our DIY projects as well as our posts about our experience. We have also been compensated for the materials needed for our DIY project and this giveaway. However, our opinions are entirely our own and we have not been paid to publish positive comments. tag:odeo.com,2009-10-29,25399788 Thu, 29 Oct 2009 14:15:30 -0700 no Handyguys Podcast podcast, contest, home improvement, hammer, tools, giveaway, screwdriver, utility knife, wonder bar, tape measure, Handyman, Handyguys Podcast Category, tool bag, hearing protection, safety glasses, True Value, Blog Squad, 16-Ounce Claw Hammer, Pliers Set, Pry Bar, Carpenter's Pencil, tool tests, DIY Blog Squad, Speed Square, Screwdriver Set Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/25349536-Episode-86-%E2%80%93-DIY-Drama-Old-Tractors-and-New-Counters DIY Drama, Old Tractors and New Counters You need to listen to the podcast to hear Paul's story about what happened to his nice laptop. Does this picture give you a clue? Click on the pic to see it bigger. We start off by talking about the True Value DIY Drama contest. You can win $5000 if your story is chosen as a winner. Brian and Paul have both had some drama but Paul most recently. You MUST listen to Paul tell his drama story in the podcast. It was a very expensive story. What are you working on lately? Brian and Paul both discuss what recent projects they have been working on. First up, Brian. Busted up old tractor Brian was able to find an old tractor on freecycle. Well, nothing is ever free. The tractor needed a battery, a new fuel line and a fuel filter.  For good measure, Brian changed the oil filter and spark plug and sharpened the blades. After adding some fresh gas, the tractor started right up.  Not too shabby. Over the past year and a half, Brian used this tractor ... DIY Drama, Old Tractors and New Counters You need to listen to the podcast to hear Paul's story about what happened to his nice laptop. Does this picture give you a clue? Click on the pic to see it bigger. We start off by talking about the True Value DIY Drama contest. You can win $5000 if your story is chosen as a winner. Brian and Paul have both had some drama but Paul most recently. You MUST listen to Paul tell his drama story in the podcast. It was a very expensive story. What are you working on lately? Brian and Paul both discuss what recent projects they have been working on. First up, Brian. Busted up old tractor Brian was able to find an old tractor on freecycle. Well, nothing is ever free. The tractor needed a battery, a new fuel line and a fuel filter.  For good measure, Brian changed the oil filter and spark plug and sharpened the blades. After adding some fresh gas, the tractor started right up.  Not too shabby. Over the past year and a half, Brian used this tractor for some pretty heavy duty mowing. Overgrown fields and campground trails were the typical terrain. In this time, the mower has required countless replacement belts plus a few hundred dollars worth of repairs for other busted parts due to its heavy abuse. Brian and Paul discuss when is it time to cut the losses. Is it worth another $40 for a pulley assembly and another $25 for another belt?  A tractor that is designed and built for the uses Brian is putting this old thing through is just not in the cards at the moment. New Counters Paul’s project was new counter tops. The design committee (his wife) did all the legwork. In the podcast we discuss some of the options and considerations. The decision was made to go with Granite. Granite is a professional installation but there is still some work for the Handyguy. Paul removed the old laminate counters, installed the plumbing under the new sink and has the back splash to tile. Doing these chores yourself can save money even when you are having granite professionally installed. Paul makes reference to a Fine Home building article on drain hookups. The Handyguys Podcast is asking that you consider participation in important research on consumers’ thoughts on advertising within their favorite Podcasts. The Association for Downloadable Media (ADM) Consumers Attitudes on Advertising & Sponsorship in Audio and Video Podcasts research project is a survey that should take you about 10 minutes and does NOT ask for personal contact information.Please consider taking part in the survey at http://www.takethesurvey.com/rawvoice. The sooner the better! The survey is going on now and will wrap up in a couple weeks. DIY Drama, Old Tractors and New Counters You need to listen to the podcast to hear Paul's story about what happened to his nice laptop. Does this picture give you a clue? Click on the pic to see it bigger. We start off by talking about the True Value DIY Drama contest. You can win $5000 if your story is chosen as a winner. Brian and Paul have both had some drama but Paul most recently. You MUST listen to Paul tell his drama story in the podcast. It was a very expensive story. What are you working on lately? Brian and Paul both discuss what recent projects they have been working on. First up, Brian. Busted up old tractor Brian was able to find an old tractor on freecycle. Well, nothing is ever free. The tractor needed a battery, a new fuel line and a fuel filter.  For good measure, Brian changed the oil filter and spark plug and sharpened the blades. After adding some fresh gas, the tractor started right up.  Not too shabby. Over the past year and a half, Brian used this tractor for some pretty heavy duty mowing. Overgrown fields and campground trails were the typical terrain. In this time, the mower has required countless replacement belts plus a few hundred dollars worth of repairs for other busted parts due to its heavy abuse. Brian and Paul discuss when is it time to cut the losses. Is it worth another $40 for a pulley assembly and another $25 for another belt?  A tractor that is designed and built for the uses Brian is putting this old thing through is just not in the cards at the moment. New Counters Paul’s project was new counter tops. The design committee (his wife) did all the legwork. In the podcast we discuss some of the options and considerations. The decision was made to go with Granite. Granite is a professional installation but there is still some work for the Handyguy. Paul removed the old laminate counters, installed the plumbing under the new sink and has the back splash to tile. Doing these chores yourself can save money even when you are having granite professionally installed. Paul makes reference to a Fine Home building article on drain hookups. The Handyguys Podcast is asking that you consider participation in important research on consumers’ thoughts on advertising within their favorite Podcasts. The Association for Downloadable Media (ADM) Consumers Attitudes on Advertising & Sponsorship in Audio and Video Podcasts research project is a survey that should take you about 10 minutes and does NOT ask for personal contact information.Please consider taking part in the survey at http://www.takethesurvey.com/rawvoice. The sooner the better! The survey is going on now and will wrap up in a couple weeks. tag:odeo.com,2009-10-22,25349536 Thu, 22 Oct 2009 13:58:37 -0700 no Handyguys Podcast podcast, MacBook Pro, DIY, home improvement, belts, battery, Handyman, blades, sink, Handyguys Podcast Category, home repair, granite, garbage disposal, MTD, John Deere, True Value, DIY Drama, mower repairs, drains, broken laptop screen, pullys, huskee, Handywoman, counters, backsplash, old tractors, tune up Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/25292732-Episode-85-%E2%80%93-Water-powered-backup-sump-pumps Water powered backup sump pumps Never have water in your basement again due to a failed sump pump or a power outage. Water powered sump pumps do not require any electricity to operate. Our listener had to remove new carpet from his finished basement due to heavy rains and a failed primary sump pump. In this episode we address backup sump pumps, in particular water powered sump pumps. We were contacted by a listener via twitter and asked if we had recommendations for a backup pump. We knew of a few brands and types but our question was specifically about water powered pumps. After a little bit of research we found Base Products Corporation makes just such a system called the Basepump. They were gracious enough to send a pump to our listener so we could interview him about the install and the product. Thanks. The pump mark was sent can be purchased through Amazon by following this link Basepump If you have a backup sump pump you wont need to pull out stinky carpets due to a flood caus... Water powered backup sump pumps Never have water in your basement again due to a failed sump pump or a power outage. Water powered sump pumps do not require any electricity to operate. Our listener had to remove new carpet from his finished basement due to heavy rains and a failed primary sump pump. In this episode we address backup sump pumps, in particular water powered sump pumps. We were contacted by a listener via twitter and asked if we had recommendations for a backup pump. We knew of a few brands and types but our question was specifically about water powered pumps. After a little bit of research we found Base Products Corporation makes just such a system called the Basepump. They were gracious enough to send a pump to our listener so we could interview him about the install and the product. Thanks. The pump mark was sent can be purchased through Amazon by following this link Basepump If you have a backup sump pump you wont need to pull out stinky carpets due to a flood caused by a failed primary pump. In this show we discuss how the pump operates, how its installed, how to choose a pump, and most importantly why you would want to install something like this if you are finishing a basement. Listen to the podcast for all the details. If you are considering finishing your basement water control is one of the most critical things to think about. Check out our other shows related to finishing your basement by clicking on the Basement Series button. Water powered backup sump pumps Never have water in your basement again due to a failed sump pump or a power outage. Water powered sump pumps do not require any electricity to operate. Our listener had to remove new carpet from his finished basement due to heavy rains and a failed primary sump pump. In this episode we address backup sump pumps, in particular water powered sump pumps. We were contacted by a listener via twitter and asked if we had recommendations for a backup pump. We knew of a few brands and types but our question was specifically about water powered pumps. After a little bit of research we found Base Products Corporation makes just such a system called the Basepump. They were gracious enough to send a pump to our listener so we could interview him about the install and the product. Thanks. The pump mark was sent can be purchased through Amazon by following this link Basepump If you have a backup sump pump you wont need to pull out stinky carpets due to a flood caused by a failed primary pump. In this show we discuss how the pump operates, how its installed, how to choose a pump, and most importantly why you would want to install something like this if you are finishing a basement. Listen to the podcast for all the details. If you are considering finishing your basement water control is one of the most critical things to think about. Check out our other shows related to finishing your basement by clicking on the Basement Series button. tag:odeo.com,2009-10-15,25292732 Thu, 15 Oct 2009 13:59:27 -0700 no Handyguys Podcast podcast, backup, home improvement, Handyman, flooding, Basement Finishing Series, Handyguys Podcast Category, sump pump, flooded basement, wet carpet, waterproofing, backup sump, basepump, backup sump pump, water powered pump Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/25256402-Episode-84-%E2%80%93-Cabinet-Veneer-and-Fireplace-Conversions Cabinet Veneer and Fireplace Conversions In this episode of The Handyguys Podcast we address two listener questions, one from voicemail about changing the look of a bathroom vanity and one through our contact form about converting a fireplace from gas to wood burning. Refinishing a bathroom vanity This question was left on our voicemail, listen to the podcast to hear the question in full. Essentially the caller, Susie, has a pine bathroom vanity with a whitewashed finish. She would like the look of a cherry vanity and wants to know her options short of replacing the vanity. The Handyguys think that replacement would be the best option. We discuss some other options such as Refacing Refinishing Using a spray toner Susie doesn’t want the mess of refinishing and doesn’t want to put a final finish on as required by using a refacing veneer. We don’t know of a pre-finished veneer. Contact paper comes to mind but that would look bad. That leaves a relatively simple and in... Cabinet Veneer and Fireplace Conversions In this episode of The Handyguys Podcast we address two listener questions, one from voicemail about changing the look of a bathroom vanity and one through our contact form about converting a fireplace from gas to wood burning. Refinishing a bathroom vanity This question was left on our voicemail, listen to the podcast to hear the question in full. Essentially the caller, Susie, has a pine bathroom vanity with a whitewashed finish. She would like the look of a cherry vanity and wants to know her options short of replacing the vanity. The Handyguys think that replacement would be the best option. We discuss some other options such as Refacing Refinishing Using a spray toner Susie doesn’t want the mess of refinishing and doesn’t want to put a final finish on as required by using a refacing veneer. We don’t know of a pre-finished veneer. Contact paper comes to mind but that would look bad. That leaves a relatively simple and inexpensive option of using a spray toner. A spray toner is a top coat finish but with color built in. Its often used in furniture repairs. This would add the cherry color yet let the wood grain show through. We recommend to try it on some scrap wood first to see if she would like the look. Worst case Susie could try it and if it doesn’t look good then replace the cabinet. Fireplace conversions We received this question from Tyler: I am wanting to put a wood burning stove into my gas fireplace. I am having a difficult time finding out what all is needed to be done so that the insert is installed and the flue is set up correctly. I have two chimney tubes one from the basement and the other from the upstairs, if it is practical doing both would be more beneficial than just one. If there is any information or help you can provide to assist me in this, it will be greatly appreciated. Thank you for your time, Tyler This is an interesting question. It is fairly common to convert a wood burning fireplace into a gas burning setup. Its not so common to go from gas to wood. If the fireplace was originally wood then it would be simple to convert back to wood. Regardless, Tyler, its time to consult an expert. There are many great local fireplace shops that can help you assess the situation and provide you with the right product for your conversion. This is no place to take chances, bring in a pro. An announcement We will be participating in a new venture with True Value and some really great bloggers. True Value is calling this the Blog Squad. Us, along with four other bloggers, will be combing the isles of our local True Value stores (on True Value’s dime) to find some great projects we can showcase. We already have some great ideas. Do any of our listeners have ideas? How about a segment on setback thermostats and energy savings? Fall lawn care? Garage organization? We may also revisit the essential tool kit for every homeowner. We might even have a giveaway so make sure you subscribe if you haven’t already. Who is the True Value DIY Blog Squad? John & Sherry with Young House Love Katie with All Bower Power Josh with Bungalow 23 Layla & Kevin with Lettered Cottage What else? True Value is also giving away a prize worth $5,000 to one lucky homeowner in their DIY Drama Contest! The contest is open to any homeowner who has gone through any type of home improvement drama- whether it’s a DIY project gone awry or a stressful project you just can’t seem to ever mark off your “Honey-Do” list. To enter, visit StartRightStartHere.com for a chance to win $5,000 to use at a local True Value store and an in-person project consultation with a knowledgeable True Value employee. “I was one of five bloggers selected by True Value to work on the DIY Squad. I have been compensated for my time commitment to the program and my DIY project as well as my posts about my experience. I have also been compensated for the materials needed for my DIY project. However, my opinions are entirely my own and I have not been paid to publish positive comments.” Cabinet Veneer and Fireplace Conversions In this episode of The Handyguys Podcast we address two listener questions, one from voicemail about changing the look of a bathroom vanity and one through our contact form about converting a fireplace from gas to wood burning. Refinishing a bathroom vanity This question was left on our voicemail, listen to the podcast to hear the question in full. Essentially the caller, Susie, has a pine bathroom vanity with a whitewashed finish. She would like the look of a cherry vanity and wants to know her options short of replacing the vanity. The Handyguys think that replacement would be the best option. We discuss some other options such as Refacing Refinishing Using a spray toner Susie doesn’t want the mess of refinishing and doesn’t want to put a final finish on as required by using a refacing veneer. We don’t know of a pre-finished veneer. Contact paper comes to mind but that would look bad. That leaves a relatively simple and inexpensive option of using a spray toner. A spray toner is a top coat finish but with color built in. Its often used in furniture repairs. This would add the cherry color yet let the wood grain show through. We recommend to try it on some scrap wood first to see if she would like the look. Worst case Susie could try it and if it doesn’t look good then replace the cabinet. Fireplace conversions We received this question from Tyler: I am wanting to put a wood burning stove into my gas fireplace. I am having a difficult time finding out what all is needed to be done so that the insert is installed and the flue is set up correctly. I have two chimney tubes one from the basement and the other from the upstairs, if it is practical doing both would be more beneficial than just one. If there is any information or help you can provide to assist me in this, it will be greatly appreciated. Thank you for your time, Tyler This is an interesting question. It is fairly common to convert a wood burning fireplace into a gas burning setup. Its not so common to go from gas to wood. If the fireplace was originally wood then it would be simple to convert back to wood. Regardless, Tyler, its time to consult an expert. There are many great local fireplace shops that can help you assess the situation and provide you with the right product for your conversion. This is no place to take chances, bring in a pro. An announcement We will be participating in a new venture with True Value and some really great bloggers. True Value is calling this the Blog Squad. Us, along with four other bloggers, will be combing the isles of our local True Value stores (on True Value’s dime) to find some great projects we can showcase. We already have some great ideas. Do any of our listeners have ideas? How about a segment on setback thermostats and energy savings? Fall lawn care? Garage organization? We may also revisit the essential tool kit for every homeowner. We might even have a giveaway so make sure you subscribe if you haven’t already. Who is the True Value DIY Blog Squad? John & Sherry with Young House Love Katie with All Bower Power Josh with Bungalow 23 Layla & Kevin with Lettered Cottage What else? True Value is also giving away a prize worth $5,000 to one lucky homeowner in their DIY Drama Contest! The contest is open to any homeowner who has gone through any type of home improvement drama- whether it’s a DIY project gone awry or a stressful project you just can’t seem to ever mark off your “Honey-Do” list. To enter, visit StartRightStartHere.com for a chance to win $5,000 to use at a local True Value store and an in-person project consultation with a knowledgeable True Value employee. “I was one of five bloggers selected by True Value to work on the DIY Squad. I have been compensated for my time commitment to the program and my DIY project as well as my posts about my experience. I have also been compensated for the materials needed for my DIY project. However, my opinions are entirely my own and I have not been paid to publish positive comments.” tag:odeo.com,2009-10-08,25256402 Thu, 08 Oct 2009 13:58:17 -0700 no Handyguys Podcast podcast, home improvement, Handyguys Podcast Category, refinishing, True Value, cabinet refacing, spray toner, bathroom vanity, veneer, Blog Squad, wood burning fireplace, gas fireplace, fireplace conversions, DIY Drama Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/25218662-Episode-83-%E2%80%93-phased-remodeling-vinyl-siding-and-grading Phased Remodeling, Vinyl Siding and Grading Phased Remodeling Painting is an easy and relatively inexpensive way to change the look of a room. In this episode The Handyguys start off discussing Phased remodeling inspired by an article in a recent “Home Improvement Times”. What is phased, or serial remodeling? Are there advantages to this approach in tough economic times? What are the disadvantages? We then address two listener questions, one on what should be included in a vinyl siding job and one about grading, moisture and stucco. Listen to the podcast for a discussion by The Handyguys Brian & Paul. Vinyl Siding We then address a question from a listener about vinyl siding, Lou Ann writes: I really enjoy your podcast, and I have a question for you. We are getting our 60 + years old house resided with vinyl siding. They will be replacing the existing aluminum siding. My question is…what can I expect? I’ve gone to website that tell you to take down all yo... Phased Remodeling, Vinyl Siding and Grading Phased Remodeling Painting is an easy and relatively inexpensive way to change the look of a room. In this episode The Handyguys start off discussing Phased remodeling inspired by an article in a recent “Home Improvement Times”. What is phased, or serial remodeling? Are there advantages to this approach in tough economic times? What are the disadvantages? We then address two listener questions, one on what should be included in a vinyl siding job and one about grading, moisture and stucco. Listen to the podcast for a discussion by The Handyguys Brian & Paul. Vinyl Siding We then address a question from a listener about vinyl siding, Lou Ann writes: I really enjoy your podcast, and I have a question for you. We are getting our 60 + years old house resided with vinyl siding. They will be replacing the existing aluminum siding. My question is…what can I expect? I’ve gone to website that tell you to take down all your framed artwork from the walls. What happens to all the stuff already cut into the siding, dryer vents, water pipes and such? Hope this isn’t a stupid question. Thanks for your help. Lou Ann – No, that’s not a stupid question at all. It is standard practice that all the penetrations through the siding are properly flashed and trimmed out when the siding is installed. It couldn’t hurt to ask your contractor though. This may be specified in your agreement but it doesn’t hurt to make a call. Do not let them charge extra after you ask. We discuss this and talk about some of the things the siding contractor will need to deal with in the podcast. Thanks for your question Lou Ann. Bonus Tip – If you are installing vinyl siding install it from back to front. The pieces overlap and when done back to front the gap is not noticeable from the front of the house, when installed front to back the gap is very noticeable. Grading Gary writes us, concerned about an inspection on a new house. I bought a house 6 weeks ago , one of the comments on the inspection report was the grading by the bedroom needed attention as it was to close to the stucco and would allow moisture to pass , this section is a new addition to the house and is built on a concrete foundation , at the front of the house however ( built in 1947 ) the stucco goes all the way under the soil as such clearly built with a different code . How do you prevent moisture ingress here ? Is the stucco sealed ? How do I know if its still effective? Thanks for the great show Gary – Thanks for the pictures. You do not need to be concerned with the stucco or sealing it, your bigger concern is the relationship of the grading to the wall and floor behind the stucco. Your grade dirt and mulch should be below the level of the bottom of the wall. You are lucky, you have a window. Measure from the windowsill to the floor, on the inside, then measure on the outside down. This will give you an idea if the grade is too high. For our listeners and readers – we followed up with Gary and his grade is low enough. That’s it for this weeks show. Make sure you subscribe and tell your friends. Phased Remodeling, Vinyl Siding and Grading Phased Remodeling Painting is an easy and relatively inexpensive way to change the look of a room. In this episode The Handyguys start off discussing Phased remodeling inspired by an article in a recent “Home Improvement Times”. What is phased, or serial remodeling? Are there advantages to this approach in tough economic times? What are the disadvantages? We then address two listener questions, one on what should be included in a vinyl siding job and one about grading, moisture and stucco. Listen to the podcast for a discussion by The Handyguys Brian & Paul. Vinyl Siding We then address a question from a listener about vinyl siding, Lou Ann writes: I really enjoy your podcast, and I have a question for you. We are getting our 60 + years old house resided with vinyl siding. They will be replacing the existing aluminum siding. My question is…what can I expect? I’ve gone to website that tell you to take down all your framed artwork from the walls. What happens to all the stuff already cut into the siding, dryer vents, water pipes and such? Hope this isn’t a stupid question. Thanks for your help. Lou Ann – No, that’s not a stupid question at all. It is standard practice that all the penetrations through the siding are properly flashed and trimmed out when the siding is installed. It couldn’t hurt to ask your contractor though. This may be specified in your agreement but it doesn’t hurt to make a call. Do not let them charge extra after you ask. We discuss this and talk about some of the things the siding contractor will need to deal with in the podcast. Thanks for your question Lou Ann. Bonus Tip – If you are installing vinyl siding install it from back to front. The pieces overlap and when done back to front the gap is not noticeable from the front of the house, when installed front to back the gap is very noticeable. Grading Gary writes us, concerned about an inspection on a new house. I bought a house 6 weeks ago , one of the comments on the inspection report was the grading by the bedroom needed attention as it was to close to the stucco and would allow moisture to pass , this section is a new addition to the house and is built on a concrete foundation , at the front of the house however ( built in 1947 ) the stucco goes all the way under the soil as such clearly built with a different code . How do you prevent moisture ingress here ? Is the stucco sealed ? How do I know if its still effective? Thanks for the great show Gary – Thanks for the pictures. You do not need to be concerned with the stucco or sealing it, your bigger concern is the relationship of the grading to the wall and floor behind the stucco. Your grade dirt and mulch should be below the level of the bottom of the wall. You are lucky, you have a window. Measure from the windowsill to the floor, on the inside, then measure on the outside down. This will give you an idea if the grade is too high. For our listeners and readers – we followed up with Gary and his grade is low enough. That’s it for this weeks show. Make sure you subscribe and tell your friends. tag:odeo.com,2009-10-01,25218662 Thu, 01 Oct 2009 14:01:16 -0700 no Handyguys Podcast podcast, home improvement, water, code, budget, Handyman, moisture, home inspection, addition, Handyguys Podcast Category, siding, new house, True Value, kitchen counters, Phased remodeling, stucco, vinyl siding Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/25180042-Episode-82-%E2%80%93-Wood-Floors-on-Concrete-Plumbing-and-Carpet-Stains Wood Floors on Concrete, Plumbing Repair and Finding Carpet Stains This is a very full show covering many different topics. We start off commenting on a article in Fine Home Building magazine about wood floors over concrete, address two listener questions (one on leaky faucets and one on garbage disposals), and then we wrap up the show with a tip from Brian about how to find pet stains in carpet. Wood floors on concrete Can this be done? Sure it can. Brian and Paul comment on an article in Fine Homebuilding. The Author, Charles Peterson, discusses a technique that uses two layers of plywood and a vapor barrier to create a stable, floating, subfloor for installation of your finished floor. Check it out and listen to The Handyguys comments in the podcast. Drippy faucets The Handyguys love getting questions where the answer is simple and inexpensive. We received this question from Cheryl I have a leaky bathtub faucet, it started dripping and it has gotten worse, do I need to replace th... Wood Floors on Concrete, Plumbing Repair and Finding Carpet Stains This is a very full show covering many different topics. We start off commenting on a article in Fine Home Building magazine about wood floors over concrete, address two listener questions (one on leaky faucets and one on garbage disposals), and then we wrap up the show with a tip from Brian about how to find pet stains in carpet. Wood floors on concrete Can this be done? Sure it can. Brian and Paul comment on an article in Fine Homebuilding. The Author, Charles Peterson, discusses a technique that uses two layers of plywood and a vapor barrier to create a stable, floating, subfloor for installation of your finished floor. Check it out and listen to The Handyguys comments in the podcast. Drippy faucets The Handyguys love getting questions where the answer is simple and inexpensive. We received this question from Cheryl I have a leaky bathtub faucet, it started dripping and it has gotten worse, do I need to replace the entire faucet? My house was built in 1953 and I’m guessing the faucet is probably that old too! It consists of two knobs, one of hot and cold and the spigot of course. I think both the hot and cold are leaking, I can’t really determine which one it is! Thanks for any help you can provide. Cheryl – Thanks for your question. NO, you do not need to replace the faucet. The fix is pretty simple. We assume you mean the drip is coming from the spout, not from behind the handles. Our friends over at hammer zone have put together some instructions. I’ll let you read them instead of my recreating the steps here. Check out HammerZone’s how to replace a washer article and listen to our podcast for details. There could be a few other issues. Give the washer replacement a try first, its easy to do. Some possible pitfalls The washer screw is broken off The seat (what the washer presses against) is damaged Parts are corroded preventing removal The handle you have may remove differently than in the pictures at hammerzone If you have trouble please let us know. You can hear our discussion of the issue in the podcast. Garbage Disposal Smells This stinky issue keeps generating interest. We have received many tips and tricks. We thought we would answer Dave’s question and pass along his tip. I always shut off the circuit breaker to the disposal anytime I am going to stick my hand in there. Just to be sure that it will not turn off. Have you guys used Draino? I had a problem where soft foods weren’t getting shredded enough to go down the drain so I started getting an odor. I poured draino down there and after it sat for awhile I ran it again and the food and smell were gone. Do you know of any problems in using draino in a disposal. ex corrosion or other problems? Good tip about the circuit breaker Dave, better safe than sorry. As for Draino. Yes and No. It depends on which draino product you are considering. Check the label. The crystals are not recommended for garbage disposers, the gel is fine according to the manufacture. Bottom line, check the label. Another Handyguy Tip Have a pet stain that you are having trouble finding? Use a UV light, sometimes called a black-light. The stain will glow. These work best when used in a darkened room. Once you find the stain you can clean it. Check out this black-light. Simple Solution Spot Spotter Ultraviolet Urine Detector Click these icons to share, thanks: Wood Floors on Concrete, Plumbing Repair and Finding Carpet Stains This is a very full show covering many different topics. We start off commenting on a article in Fine Home Building magazine about wood floors over concrete, address two listener questions (one on leaky faucets and one on garbage disposals), and then we wrap up the show with a tip from Brian about how to find pet stains in carpet. Wood floors on concrete Can this be done? Sure it can. Brian and Paul comment on an article in Fine Homebuilding. The Author, Charles Peterson, discusses a technique that uses two layers of plywood and a vapor barrier to create a stable, floating, subfloor for installation of your finished floor. Check it out and listen to The Handyguys comments in the podcast. Drippy faucets The Handyguys love getting questions where the answer is simple and inexpensive. We received this question from Cheryl I have a leaky bathtub faucet, it started dripping and it has gotten worse, do I need to replace the entire faucet? My house was built in 1953 and I’m guessing the faucet is probably that old too! It consists of two knobs, one of hot and cold and the spigot of course. I think both the hot and cold are leaking, I can’t really determine which one it is! Thanks for any help you can provide. Cheryl – Thanks for your question. NO, you do not need to replace the faucet. The fix is pretty simple. We assume you mean the drip is coming from the spout, not from behind the handles. Our friends over at hammer zone have put together some instructions. I’ll let you read them instead of my recreating the steps here. Check out HammerZone’s how to replace a washer article and listen to our podcast for details. There could be a few other issues. Give the washer replacement a try first, its easy to do. Some possible pitfalls The washer screw is broken off The seat (what the washer presses against) is damaged Parts are corroded preventing removal The handle you have may remove differently than in the pictures at hammerzone If you have trouble please let us know. You can hear our discussion of the issue in the podcast. Garbage Disposal Smells This stinky issue keeps generating interest. We have received many tips and tricks. We thought we would answer Dave’s question and pass along his tip. I always shut off the circuit breaker to the disposal anytime I am going to stick my hand in there. Just to be sure that it will not turn off. Have you guys used Draino? I had a problem where soft foods weren’t getting shredded enough to go down the drain so I started getting an odor. I poured draino down there and after it sat for awhile I ran it again and the food and smell were gone. Do you know of any problems in using draino in a disposal. ex corrosion or other problems? Good tip about the circuit breaker Dave, better safe than sorry. As for Draino. Yes and No. It depends on which draino product you are considering. Check the label. The crystals are not recommended for garbage disposers, the gel is fine according to the manufacture. Bottom line, check the label. Another Handyguy Tip Have a pet stain that you are having trouble finding? Use a UV light, sometimes called a black-light. The stain will glow. These work best when used in a darkened room. Once you find the stain you can clean it. Check out this black-light. Simple Solution Spot Spotter Ultraviolet Urine Detector Click these icons to share, thanks: tag:odeo.com,2009-09-24,25180042 Thu, 24 Sep 2009 13:59:11 -0700 no Handyguys Podcast podcast, home improvement, Smells, valve, concrete, bathroom, tub, Handyguys Podcast Category, washer, leaks, garbage disposal, cleaning garbage disposals, blacklight, black-light, Fine Homebuilding, wood floors, urine detection, valve seat, Draino, vapor barrier, UV Lights, pet stains, uv flashlight, uv light, stain detection, valve stem, pet stain detection, Charles Peterson, garbage di, pet smell detection, plumbing repair, Drips Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/25147701-Episode-81-%E2%80%93-Handyguy-Vehicles-Air-Conditioning-and-Mower-Repair Handyguy Vehicles, Air Conditioning and Mower Repair We cover a lot of topics in this show. Should Handyguy Paul Trade in his pickup, why does a listener’s air conditioner leak and doing carborator work on your mower. First up – Brian and Paul discuss if a handyguy needs a pickup truck. Brian says yes. Paul isn’t so sure. We all agree they are handy. They aren’t so practical when they get too old and repairs are costing you as much as a new car payment. Oh, and the fuel costs. So, Handyguy Paul is going to trade in his pickup for a sedan. Fortunately he can call Brian, who is keeping his truck, if he needs help hauling something. Air conditioning leaks The Handyguys then discuss a question posted as a response to our air conditioning troubleshooting show, episode 69. My inside handler unit is constantly leaking water inside the closet. I’ve cleaned the lines that lead to the outside and also cleaned the pan and removed all the gunk that was accumulated.... Handyguy Vehicles, Air Conditioning and Mower Repair We cover a lot of topics in this show. Should Handyguy Paul Trade in his pickup, why does a listener’s air conditioner leak and doing carborator work on your mower. First up – Brian and Paul discuss if a handyguy needs a pickup truck. Brian says yes. Paul isn’t so sure. We all agree they are handy. They aren’t so practical when they get too old and repairs are costing you as much as a new car payment. Oh, and the fuel costs. So, Handyguy Paul is going to trade in his pickup for a sedan. Fortunately he can call Brian, who is keeping his truck, if he needs help hauling something. Air conditioning leaks The Handyguys then discuss a question posted as a response to our air conditioning troubleshooting show, episode 69. My inside handler unit is constantly leaking water inside the closet. I’ve cleaned the lines that lead to the outside and also cleaned the pan and removed all the gunk that was accumulated. I even sprayed an a/c cleaner on the coils, which did not really look that dirty. After all that work, the a/c began to leak again thirty minutes later. The house is cool and the system seems to be working fine however the closet and filter are soaked. I’m frustrated and don’t want to call a company just to discover that it was something simple that I was not aware of. Please help. Thanks, Nelson Nelson, thanks for your comments and questions. The Handyguys discuss the situation in the podcast. Bottom line, Nelson, you will need to closely inspect to determine where the leak is coming from. Once you determine that you can fix the problem. Most likely you have a leak in the drain, a bad pump (if you have one) or a clogged line causing the pan to overflow. once you find the source let us know, we may be able to help you fix it. Mower safety and carburetor repair Lastly, The Handyguys address a question about mowers, carbs on mowers in particular. I am really enjoying these podcasts, some really great tips. Just recently found this site and will eventually get caught up to your recent podcasts. One thing I would like to add to this podcast however is when you are working under the mower near the blade to remove clumped grass or to sharpen the blade (I use an angle grinder), disconnect the spark plug wire from the spark plug. You can actually start the mower by moving the blade out of the way. I am not missing any digits, but I know a few who have had close calls. One question that I have is with the carb. I am working on a mower and did the standard tune-ups, plug, oil and air filter. I have a situation where the mower is idling really rough almost to the point of cutting itself off. Since my first go round with the tune up did not fix the problem, I am planning on removing the carb to attempt to clean it. Do you guys have any suggestions on cleaning the carb before I go out and buy a new one? I’ve replaced carbs on mowers before just never cleaned one. Thanks and keep up the good work. David, Thanks for the kudos and the safety tip. As for your carburetor. Yes, clean it first. The Handyguys have heard great things about a product called Sea Foam for carb cleaning. Cleaning the carb is a great thing to try before going deeper into a repair.  If cleaning the carb doesn’t work then you will want to see if a rebuild kit is available. This will be cheaper than a replacement. Click these icons to share, thanks: Handyguy Vehicles, Air Conditioning and Mower Repair We cover a lot of topics in this show. Should Handyguy Paul Trade in his pickup, why does a listener’s air conditioner leak and doing carborator work on your mower. First up – Brian and Paul discuss if a handyguy needs a pickup truck. Brian says yes. Paul isn’t so sure. We all agree they are handy. They aren’t so practical when they get too old and repairs are costing you as much as a new car payment. Oh, and the fuel costs. So, Handyguy Paul is going to trade in his pickup for a sedan. Fortunately he can call Brian, who is keeping his truck, if he needs help hauling something. Air conditioning leaks The Handyguys then discuss a question posted as a response to our air conditioning troubleshooting show, episode 69. My inside handler unit is constantly leaking water inside the closet. I’ve cleaned the lines that lead to the outside and also cleaned the pan and removed all the gunk that was accumulated. I even sprayed an a/c cleaner on the coils, which did not really look that dirty. After all that work, the a/c began to leak again thirty minutes later. The house is cool and the system seems to be working fine however the closet and filter are soaked. I’m frustrated and don’t want to call a company just to discover that it was something simple that I was not aware of. Please help. Thanks, Nelson Nelson, thanks for your comments and questions. The Handyguys discuss the situation in the podcast. Bottom line, Nelson, you will need to closely inspect to determine where the leak is coming from. Once you determine that you can fix the problem. Most likely you have a leak in the drain, a bad pump (if you have one) or a clogged line causing the pan to overflow. once you find the source let us know, we may be able to help you fix it. Mower safety and carburetor repair Lastly, The Handyguys address a question about mowers, carbs on mowers in particular. I am really enjoying these podcasts, some really great tips. Just recently found this site and will eventually get caught up to your recent podcasts. One thing I would like to add to this podcast however is when you are working under the mower near the blade to remove clumped grass or to sharpen the blade (I use an angle grinder), disconnect the spark plug wire from the spark plug. You can actually start the mower by moving the blade out of the way. I am not missing any digits, but I know a few who have had close calls. One question that I have is with the carb. I am working on a mower and did the standard tune-ups, plug, oil and air filter. I have a situation where the mower is idling really rough almost to the point of cutting itself off. Since my first go round with the tune up did not fix the problem, I am planning on removing the carb to attempt to clean it. Do you guys have any suggestions on cleaning the carb before I go out and buy a new one? I’ve replaced carbs on mowers before just never cleaned one. Thanks and keep up the good work. David, Thanks for the kudos and the safety tip. As for your carburetor. Yes, clean it first. The Handyguys have heard great things about a product called Sea Foam for carb cleaning. Cleaning the carb is a great thing to try before going deeper into a repair.  If cleaning the carb doesn’t work then you will want to see if a rebuild kit is available. This will be cheaper than a replacement. Click these icons to share, thanks: tag:odeo.com,2009-09-18,25147701 Fri, 18 Sep 2009 14:03:44 -0700 no Handyguys Podcast podcast, chevrolet, pickup, dodge, ford, truck, gas, home improvement, Handyman, Handyguys Podcast Category, sea foam, carb, car payment, pickup truck, truck rentals, carburetor, sedan, fuel costs, gas costs Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/25120481-Episode-80-%E2%80%93-Porch-posts Handyguy Paul installs some new porch posts In this show we discuss installing new porch posts and the many choices beyond the traditional wood posts. Some materials: Wood PVC FRP (Fiberglass-reinforced Polymer) The Handyguys discuss some advantages and dis-advantages of each. We then discuss some things to consider when installing new porch posts. Paul installed the FRP posts. Listen to the podcast for all the details. Click these icons to share, thanks: Handyguy Paul installs some new porch posts In this show we discuss installing new porch posts and the many choices beyond the traditional wood posts. Some materials: Wood PVC FRP (Fiberglass-reinforced Polymer) The Handyguys discuss some advantages and dis-advantages of each. We then discuss some things to consider when installing new porch posts. Paul installed the FRP posts. Listen to the podcast for all the details. Click these icons to share, thanks: Handyguy Paul installs some new porch posts In this show we discuss installing new porch posts and the many choices beyond the traditional wood posts. Some materials: Wood PVC FRP (Fiberglass-reinforced Polymer) The Handyguys discuss some advantages and dis-advantages of each. We then discuss some things to consider when installing new porch posts. Paul installed the FRP posts. Listen to the podcast for all the details. Click these icons to share, thanks: tag:odeo.com,2009-09-10,25120481 Thu, 10 Sep 2009 14:00:45 -0700 no Handyguys Podcast pvc, posts, Handyman, Bondo, bond, Handyguys Podcast Category, porch posts, porch, Fiberglass-reinforced Polymer, Architectural columns, FRP columns Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/25097949-Episode-79-%E2%80%93-The-Handyguys-Rant Home centers and door to door security sales It seems that the Handyguys are in a bad mood this week due to terrible service at the local home center.  The poor service, coupled with traveling security salesmen offering “free installations,” created some cranky Handyguys. First up are the stupid self check-out registers at the home center. Both Lowes and Home Depot the major US home center chains deserve blame. This cost cutting trend supposedly frees up personnel to help you load your car. But if you need help loading product in your car, you probably can’t navigate it through self checkout (let alone getting it on one of those scanners!). It is not as though the “displaced” cashiers are out on the floor helping you with that crazy plumbing problem in your house. Brian shares a story about visiting a home center near his office with a simple purchase and NO human cashiers in sight.  The 4 self checkout stations were slowly processing the customers who ... Home centers and door to door security sales It seems that the Handyguys are in a bad mood this week due to terrible service at the local home center.  The poor service, coupled with traveling security salesmen offering “free installations,” created some cranky Handyguys. First up are the stupid self check-out registers at the home center. Both Lowes and Home Depot the major US home center chains deserve blame. This cost cutting trend supposedly frees up personnel to help you load your car. But if you need help loading product in your car, you probably can’t navigate it through self checkout (let alone getting it on one of those scanners!). It is not as though the “displaced” cashiers are out on the floor helping you with that crazy plumbing problem in your house. Brian shares a story about visiting a home center near his office with a simple purchase and NO human cashiers in sight.  The 4 self checkout stations were slowly processing the customers who had smaller goods to scan. The machines were scanning but with bill acceptors rejecting bills, machines balking about what is and isn’t in the bagging area, there was an increasingly long line. When Brian finally had his turn to scan his long boards, there was no one to help when the scanner began nagging about unexpected items  in the bagging area. All four stations had people grumbling, the lost attendant was grumbling and trying, unsuccessfully, to help someone out. The whole experience was so frustrating that Brian just left and went to a different home center! As a goodbye, the attendant yelled for Brian to put the items back on the shelves! Well, wouldn’t you know, the other home center chain that Brian went to has just installed self checkout too!!! Wake up Home Depot and Lowes. Customer service will win you loyal customers. The Handyguys would welcome anyone from either chain who would like to come on the show and discuss improvements you are making that are beneficial to customers . And what is Menards doing? We have never been to one. Home security hassles Both Paul and Brian were recently visited by door to door vendor pushing “Free” security systems. Every high pressure tactic in the book was attempted. The catch? About $45 per month. Paul did some research and the system can be bought and installed DIY for a couple hundred dollars. Monitoring can be had for under $10 a month for DIY systems.  Check out Paul’s recommendations for web sites where you can purchase these systems. Click these icons to share, thanks: Home centers and door to door security sales It seems that the Handyguys are in a bad mood this week due to terrible service at the local home center.  The poor service, coupled with traveling security salesmen offering “free installations,” created some cranky Handyguys. First up are the stupid self check-out registers at the home center. Both Lowes and Home Depot the major US home center chains deserve blame. This cost cutting trend supposedly frees up personnel to help you load your car. But if you need help loading product in your car, you probably can’t navigate it through self checkout (let alone getting it on one of those scanners!). It is not as though the “displaced” cashiers are out on the floor helping you with that crazy plumbing problem in your house. Brian shares a story about visiting a home center near his office with a simple purchase and NO human cashiers in sight.  The 4 self checkout stations were slowly processing the customers who had smaller goods to scan. The machines were scanning but with bill acceptors rejecting bills, machines balking about what is and isn’t in the bagging area, there was an increasingly long line. When Brian finally had his turn to scan his long boards, there was no one to help when the scanner began nagging about unexpected items  in the bagging area. All four stations had people grumbling, the lost attendant was grumbling and trying, unsuccessfully, to help someone out. The whole experience was so frustrating that Brian just left and went to a different home center! As a goodbye, the attendant yelled for Brian to put the items back on the shelves! Well, wouldn’t you know, the other home center chain that Brian went to has just installed self checkout too!!! Wake up Home Depot and Lowes. Customer service will win you loyal customers. The Handyguys would welcome anyone from either chain who would like to come on the show and discuss improvements you are making that are beneficial to customers . And what is Menards doing? We have never been to one. Home security hassles Both Paul and Brian were recently visited by door to door vendor pushing “Free” security systems. Every high pressure tactic in the book was attempted. The catch? About $45 per month. Paul did some research and the system can be bought and installed DIY for a couple hundred dollars. Monitoring can be had for under $10 a month for DIY systems.  Check out Paul’s recommendations for web sites where you can purchase these systems. Click these icons to share, thanks: tag:odeo.com,2009-09-04,25097949 Fri, 04 Sep 2009 12:36:15 -0700 no Handyguys Podcast podcast, scams, Home Depot, home improvement, rant, lowes, register, ace, scanner, Handyguys Podcast Category, Monitoring, hassles, Home Security, direct sales, pos, home center, Self checkout, True Value, door to door sales, Security systems, Menards, hardware store, big box store, Ace Hardware, Point of Sale Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/25033506-Episode-78-%E2%80%93-Lawn-Multi-Tool The Handyguys Discuss the “Leatherman” for your yard. Handyguy Paul wonders if there is an all-in-one tool that can edge, trim, prune, blow leaves and shovel your snow.  Well, with the exception of the snow, there is such a tool.  In fact several manufacturers make such a tool.  Stihl calls theirs the “Kombi” because it is truly a master combination tool for  your yard. But first, the Handyguys answer a listener question about cedar siding: I just bought a house with Cedar siding.  I live in Northern IL.  According to the pre-purchase inspector the siding is in fair condition.  It needs some sealant and to be retreated or painted.  What kind of sealant and paint or treatment would you recommend? I want to keep the current color of the wood as best as possible. Thanks Jas Thanks for the question Jas.  Brian used to have Cedar siding on his old house so he has a definite opinion on the matter.  Listen to the podcast for his response. Combination yard tools Now ... The Handyguys Discuss the “Leatherman” for your yard. Handyguy Paul wonders if there is an all-in-one tool that can edge, trim, prune, blow leaves and shovel your snow.  Well, with the exception of the snow, there is such a tool.  In fact several manufacturers make such a tool.  Stihl calls theirs the “Kombi” because it is truly a master combination tool for  your yard. But first, the Handyguys answer a listener question about cedar siding: I just bought a house with Cedar siding.  I live in Northern IL.  According to the pre-purchase inspector the siding is in fair condition.  It needs some sealant and to be retreated or painted.  What kind of sealant and paint or treatment would you recommend? I want to keep the current color of the wood as best as possible. Thanks Jas Thanks for the question Jas.  Brian used to have Cedar siding on his old house so he has a definite opinion on the matter.  Listen to the podcast for his response. Combination yard tools Now on to the combination yard tools.  Brian owns and operates one of the Stihl Kombi tools and has found it very useful.  The main benefit is that you only have to maintain one engine for several different yard tools But Paul is not convinced.  Can this single tool really do a good job with each task or does it have to make compromises?  And are there other manufacturers of these tools? Brian explains why he likes his Stihl KombiSystem, but there are certainly other comparable tools: Ryobi, Echo, Husqvarna, Troybilt, John Deere. Listen to the full podcast for Brian’s opinion on the tool and for the Handyguy’s overall opinions on this tool category. Click these icons to share, thanks: The Handyguys Discuss the “Leatherman” for your yard. Handyguy Paul wonders if there is an all-in-one tool that can edge, trim, prune, blow leaves and shovel your snow.  Well, with the exception of the snow, there is such a tool.  In fact several manufacturers make such a tool.  Stihl calls theirs the “Kombi” because it is truly a master combination tool for  your yard. But first, the Handyguys answer a listener question about cedar siding: I just bought a house with Cedar siding.  I live in Northern IL.  According to the pre-purchase inspector the siding is in fair condition.  It needs some sealant and to be retreated or painted.  What kind of sealant and paint or treatment would you recommend? I want to keep the current color of the wood as best as possible. Thanks Jas Thanks for the question Jas.  Brian used to have Cedar siding on his old house so he has a definite opinion on the matter.  Listen to the podcast for his response. Combination yard tools Now on to the combination yard tools.  Brian owns and operates one of the Stihl Kombi tools and has found it very useful.  The main benefit is that you only have to maintain one engine for several different yard tools But Paul is not convinced.  Can this single tool really do a good job with each task or does it have to make compromises?  And are there other manufacturers of these tools? Brian explains why he likes his Stihl KombiSystem, but there are certainly other comparable tools: Ryobi, Echo, Husqvarna, Troybilt, John Deere. Listen to the full podcast for Brian’s opinion on the tool and for the Handyguy’s overall opinions on this tool category. Click these icons to share, thanks: tag:odeo.com,2009-08-27,25033506 Thu, 27 Aug 2009 13:59:21 -0700 no Handyguys Podcast podcast, home improvement, echo, deer, leatherman, Handyguys Podcast Category, Husqvarna, TroyBuilt, John Deere, Cabbots, tryoy-built, cetol, sikkens cetol 123, royobi, cetol 123, sikkens Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24994942-Episode-77-%E2%80%93-Is-Your-House-a-Money-Pit The Handyguys take a detour this week to interview Craig Smith from http://www.servicemagic.com/ to discuss a recent survey on home maintenance costs. Do you know how much you spend each year to maintain your home?  Are you spending too much?  The servicemagic.com survey summarizes the actual cost of maintaining a home. While some homes are slow drains on your income, others are more like a sink hole that will suck your bank account dry.  A quantitative look at the data may help you determine whether you should keep fixing your home or think about planting roots in another neighborhood. Check out the Podcast for the full interview and let the Handyguys know if you have a question about your home. Click these icons to share, thanks: The Handyguys take a detour this week to interview Craig Smith from http://www.servicemagic.com/ to discuss a recent survey on home maintenance costs. Do you know how much you spend each year to maintain your home?  Are you spending too much?  The servicemagic.com survey summarizes the actual cost of maintaining a home. While some homes are slow drains on your income, others are more like a sink hole that will suck your bank account dry.  A quantitative look at the data may help you determine whether you should keep fixing your home or think about planting roots in another neighborhood. Check out the Podcast for the full interview and let the Handyguys know if you have a question about your home. Click these icons to share, thanks: The Handyguys take a detour this week to interview Craig Smith from http://www.servicemagic.com/ to discuss a recent survey on home maintenance costs. Do you know how much you spend each year to maintain your home?  Are you spending too much?  The servicemagic.com survey summarizes the actual cost of maintaining a home. While some homes are slow drains on your income, others are more like a sink hole that will suck your bank account dry.  A quantitative look at the data may help you determine whether you should keep fixing your home or think about planting roots in another neighborhood. Check out the Podcast for the full interview and let the Handyguys know if you have a question about your home. Click these icons to share, thanks: tag:odeo.com,2009-08-20,24994942 Thu, 20 Aug 2009 13:59:14 -0700 no Handyguys Podcast survey, home improvement, costs, Handyguys Podcast Category, Craig Smith, Money Pit, maintenence, sink hole, home repair costs, servicemagic, Service Magic Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24955947-Episode-76-%E2%80%93-Deck-Stains-and-Tub-Glazing The Handyguys Discuss deck finishes and tub finishes in one podcast. That’s right, tub finishes. Deck Stains First up though is a question from Joan that came in through our new call-in service. Check it out on the home page if you haven’t seen it yet. Joan’s question has to do with deck finishes when there are undesirable variations in wood color. Wat kind of finish would be good. She specifically asks about Cabbots Australian Timber Oil finish. The natural version of this will not impart too much color and will not hide the color variations in the wood. A better choice would be something with some color yet still let the beauty of the wood show through. Joan, look for a tinted version of the timber oil finish or use a semi-transparent stain. You can get all of Brian and Paul’s commentary in the podcast. Thanks for the question Joan. Tub Finishes We then address an issues sent to us by Jeff, he writes: I have a home built in 1947 that my wife and I bought ab... The Handyguys Discuss deck finishes and tub finishes in one podcast. That’s right, tub finishes. Deck Stains First up though is a question from Joan that came in through our new call-in service. Check it out on the home page if you haven’t seen it yet. Joan’s question has to do with deck finishes when there are undesirable variations in wood color. Wat kind of finish would be good. She specifically asks about Cabbots Australian Timber Oil finish. The natural version of this will not impart too much color and will not hide the color variations in the wood. A better choice would be something with some color yet still let the beauty of the wood show through. Joan, look for a tinted version of the timber oil finish or use a semi-transparent stain. You can get all of Brian and Paul’s commentary in the podcast. Thanks for the question Joan. Tub Finishes We then address an issues sent to us by Jeff, he writes: I have a home built in 1947 that my wife and I bought about a year and a half ago, and have spent a lot of time updating little things here and there. My biggest issue that scares me to death is the old tile and the bathtub in the bathroom. The floor tile is really old and dull and totally lost all of it’s glaze, the grout is also pretty much black and stained. The bathtub is the same situation and has no glaze to it. I’ve tried to use the super powerful cleaners you can buy at Home Depot or Lowe’s, and it hardly worked at all. After talking with a friend we have thought about getting our bathtub re-glazed, and we are curious if it is possible to get the tile re-glazed as well? If it is possible, would it even be worth it from a financial standpoint, or would it be less expensive to just replace the tile (which I know is a lot of work)? Thanks guys, I love your show. Been there, done that Jeff. Handyguy Brian went the route of a complete bathroom gut and remodel but you ask about re-glazing. There are many companies that can do this for you. Its not a DIY process. There are also companies that can re-do your tub with an acrylic insert, sort of a tub within a tub, and put up a new acrylic tub surround over the tile. In the Podcast we discuss the advantages and disadvantages of re-glazing, tub liners and complete bathroom remodels. Bottom line Jeff, if its your only bathroom re-glazing will be a much faster option and cheaper than a full remodel. Click these icons to share, thanks: The Handyguys Discuss deck finishes and tub finishes in one podcast. That’s right, tub finishes. Deck Stains First up though is a question from Joan that came in through our new call-in service. Check it out on the home page if you haven’t seen it yet. Joan’s question has to do with deck finishes when there are undesirable variations in wood color. Wat kind of finish would be good. She specifically asks about Cabbots Australian Timber Oil finish. The natural version of this will not impart too much color and will not hide the color variations in the wood. A better choice would be something with some color yet still let the beauty of the wood show through. Joan, look for a tinted version of the timber oil finish or use a semi-transparent stain. You can get all of Brian and Paul’s commentary in the podcast. Thanks for the question Joan. Tub Finishes We then address an issues sent to us by Jeff, he writes: I have a home built in 1947 that my wife and I bought about a year and a half ago, and have spent a lot of time updating little things here and there. My biggest issue that scares me to death is the old tile and the bathtub in the bathroom. The floor tile is really old and dull and totally lost all of it’s glaze, the grout is also pretty much black and stained. The bathtub is the same situation and has no glaze to it. I’ve tried to use the super powerful cleaners you can buy at Home Depot or Lowe’s, and it hardly worked at all. After talking with a friend we have thought about getting our bathtub re-glazed, and we are curious if it is possible to get the tile re-glazed as well? If it is possible, would it even be worth it from a financial standpoint, or would it be less expensive to just replace the tile (which I know is a lot of work)? Thanks guys, I love your show. Been there, done that Jeff. Handyguy Brian went the route of a complete bathroom gut and remodel but you ask about re-glazing. There are many companies that can do this for you. Its not a DIY process. There are also companies that can re-do your tub with an acrylic insert, sort of a tub within a tub, and put up a new acrylic tub surround over the tile. In the Podcast we discuss the advantages and disadvantages of re-glazing, tub liners and complete bathroom remodels. Bottom line Jeff, if its your only bathroom re-glazing will be a much faster option and cheaper than a full remodel. Click these icons to share, thanks: tag:odeo.com,2009-08-13,24955947 Thu, 13 Aug 2009 13:58:36 -0700 no Handyguys Podcast podcast, home improvement, Decks, deck, Handyguys Podcast Category, Tub Glazing, Cabbots, Australian Timber Oil, Valspar, Deck Stains, bath fitters Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24920769-Episode-75-%E2%80%93-Basement-Systems-Continued-and-Paint-Removal In this episode Brian & Paul continue the discussion of various Basement Systems and also take a listener question about paint removal First up, we get right to Will’s question Hiya Handyguys, We have just bought our first home ever! It’s an older, fixer-upper house in a historic district in Knoxville, TN. I painted houses professionally for a few years, so we’ve told the renovation contractor that he won’t have to do any interior or exterior painting. The house has aluminum siding on it right now that we want to remove. The standard siding in the neighborhood is vertically slatted cedar siding, and luckily this original siding still exists under the aluminum. If possible, we’d like to try and rehabilitate it instead of replacing it. I’ve painted a couple other houses in the neighborhood and know first hand how painstaking it is to scrape that old, alligatored paint off, fill the remaining gaps, and paint over. I’d like to take a more ag... In this episode Brian & Paul continue the discussion of various Basement Systems and also take a listener question about paint removal First up, we get right to Will’s question Hiya Handyguys, We have just bought our first home ever! It’s an older, fixer-upper house in a historic district in Knoxville, TN. I painted houses professionally for a few years, so we’ve told the renovation contractor that he won’t have to do any interior or exterior painting. The house has aluminum siding on it right now that we want to remove. The standard siding in the neighborhood is vertically slatted cedar siding, and luckily this original siding still exists under the aluminum. If possible, we’d like to try and rehabilitate it instead of replacing it. I’ve painted a couple other houses in the neighborhood and know first hand how painstaking it is to scrape that old, alligatored paint off, fill the remaining gaps, and paint over. I’d like to take a more aggressive approach to this project by just stripping the siding down to the bare wood and starting from there. I’m thinking that some sort of belt sander would probably be the best approach here. I wanted to ask you guys if you have any suggestions for the best type of sander to buy for this project, or if you have any other suggestions. I have been listening to the show every day since the purchase of the house and learn something new every time. Keep up the good work! Best, Will Will – You may have a long road ahead of you. neither Paul or I like scraping paint. You have a three general options, mechanical, heat or checmical. A sander will just clog. You could use a PaintEater for about $75, a tool with an abrasive wheel like the porter cable opaint remover or one with cutting kinives like the paint shaver. Handy guy Brian likes the heat method. Lastly there are chemical strippers. Listen to the show for discussion of each of these. One other consideration Will, the siding guys likely have cut widow sills, remvoed trim and such. You may find things in worse shape than you think. maybe just reside the whole house if you want to bring it back to its original glory. Basement Systems Continued Brian & Paul then wrap up the show by finishing their discussion on  basement systems that they started last week. Click these icons to share, thanks: In this episode Brian & Paul continue the discussion of various Basement Systems and also take a listener question about paint removal First up, we get right to Will’s question Hiya Handyguys, We have just bought our first home ever! It’s an older, fixer-upper house in a historic district in Knoxville, TN. I painted houses professionally for a few years, so we’ve told the renovation contractor that he won’t have to do any interior or exterior painting. The house has aluminum siding on it right now that we want to remove. The standard siding in the neighborhood is vertically slatted cedar siding, and luckily this original siding still exists under the aluminum. If possible, we’d like to try and rehabilitate it instead of replacing it. I’ve painted a couple other houses in the neighborhood and know first hand how painstaking it is to scrape that old, alligatored paint off, fill the remaining gaps, and paint over. I’d like to take a more aggressive approach to this project by just stripping the siding down to the bare wood and starting from there. I’m thinking that some sort of belt sander would probably be the best approach here. I wanted to ask you guys if you have any suggestions for the best type of sander to buy for this project, or if you have any other suggestions. I have been listening to the show every day since the purchase of the house and learn something new every time. Keep up the good work! Best, Will Will – You may have a long road ahead of you. neither Paul or I like scraping paint. You have a three general options, mechanical, heat or checmical. A sander will just clog. You could use a PaintEater for about $75, a tool with an abrasive wheel like the porter cable opaint remover or one with cutting kinives like the paint shaver. Handy guy Brian likes the heat method. Lastly there are chemical strippers. Listen to the show for discussion of each of these. One other consideration Will, the siding guys likely have cut widow sills, remvoed trim and such. You may find things in worse shape than you think. maybe just reside the whole house if you want to bring it back to its original glory. Basement Systems Continued Brian & Paul then wrap up the show by finishing their discussion on  basement systems that they started last week. Click these icons to share, thanks: tag:odeo.com,2009-08-06,24920769 Thu, 06 Aug 2009 13:59:07 -0700 no Handyguys Podcast podcast, DIY, home improvement, Porter Cable, Handyguys Podcast Category, Basement Systems, stripping, peeling paint, paint shaver, paint eater, painteater, paint removal Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24906062-Episode-74-%E2%80%93-Basement-Systems-and-Listener-Questions The Handyguys address a listener question about his air conditioning and then talk about basement finishing systems. Our listener Marc used our new call-in feature on the website and asked us about his air conditioning system. Marc’s question, in summary is I live in a ranch style house that has two HVAC zones. We spend most of the time in only half of the house. Would it be OK to turn off the system in the half of the house we don’t use? Great question Mark. Before we answer – Mark has a great podcast and website for woodworkers called The Wood Whisperer. If you ever want to be inspired to do some woodworking yourselves make sure you check out what Mark is doing online. OK, back to marks question. Short answer is yes. You will have spill-over from one half to another. A simple solution would be to just put up a heavy drape to keep the cool air in the part of the house you are in. We would also recommend not turning off the system completely but just turn it back. ... The Handyguys address a listener question about his air conditioning and then talk about basement finishing systems. Our listener Marc used our new call-in feature on the website and asked us about his air conditioning system. Marc’s question, in summary is I live in a ranch style house that has two HVAC zones. We spend most of the time in only half of the house. Would it be OK to turn off the system in the half of the house we don’t use? Great question Mark. Before we answer – Mark has a great podcast and website for woodworkers called The Wood Whisperer. If you ever want to be inspired to do some woodworking yourselves make sure you check out what Mark is doing online. OK, back to marks question. Short answer is yes. You will have spill-over from one half to another. A simple solution would be to just put up a heavy drape to keep the cool air in the part of the house you are in. We would also recommend not turning off the system completely but just turn it back. An automatic setback thermostat can help with this. There could be issues – Does the system share duct work throughout the house? Will the “design committee” allow for such a guy thing as a curtain in the middle of the house? Does the floor plan even allow for a separation? Maybe you can make friends with an HVAC guy, invite him over for a beer, and ask his opinion. Listen to the podcast to hear Marc ask his question and for our more detailed answer. Thanks to Owens Corning for the picture of their system going in Basement Finishing Systems The Handyguys, Brian and Paul, have both done DIY basement finishing. We have been asked our opinions on so called basement finishing systems. These are not DIY solutions. A company will come in and use their system of pre-fabricated panels to put up your walls. Some companies offering these systems Owens Corning Impressive Basement Systems Ultimate Basement Makeover Basement Living Systems Basement Max Beyond Basement Basement Tuxedo Handyguy Paul found an old webpage where the author recounts his experience with one of these systems. Check it out – Owens Corning Basement System Experiences. Brian and Paul discuss the pros and cons of these systems. Listen to the podcast for all the details. Oh, and we ran out of time. Make sure you check out next weeks episode (link wont work until next week) where we finish the discussion! If you subscribe you will get the new show automatically. Cool. Click these icons to share, thanks: The Handyguys address a listener question about his air conditioning and then talk about basement finishing systems. Our listener Marc used our new call-in feature on the website and asked us about his air conditioning system. Marc’s question, in summary is I live in a ranch style house that has two HVAC zones. We spend most of the time in only half of the house. Would it be OK to turn off the system in the half of the house we don’t use? Great question Mark. Before we answer – Mark has a great podcast and website for woodworkers called The Wood Whisperer. If you ever want to be inspired to do some woodworking yourselves make sure you check out what Mark is doing online. OK, back to marks question. Short answer is yes. You will have spill-over from one half to another. A simple solution would be to just put up a heavy drape to keep the cool air in the part of the house you are in. We would also recommend not turning off the system completely but just turn it back. An automatic setback thermostat can help with this. There could be issues – Does the system share duct work throughout the house? Will the “design committee” allow for such a guy thing as a curtain in the middle of the house? Does the floor plan even allow for a separation? Maybe you can make friends with an HVAC guy, invite him over for a beer, and ask his opinion. Listen to the podcast to hear Marc ask his question and for our more detailed answer. Thanks to Owens Corning for the picture of their system going in Basement Finishing Systems The Handyguys, Brian and Paul, have both done DIY basement finishing. We have been asked our opinions on so called basement finishing systems. These are not DIY solutions. A company will come in and use their system of pre-fabricated panels to put up your walls. Some companies offering these systems Owens Corning Impressive Basement Systems Ultimate Basement Makeover Basement Living Systems Basement Max Beyond Basement Basement Tuxedo Handyguy Paul found an old webpage where the author recounts his experience with one of these systems. Check it out – Owens Corning Basement System Experiences. Brian and Paul discuss the pros and cons of these systems. Listen to the podcast for all the details. Oh, and we ran out of time. Make sure you check out next weeks episode (link wont work until next week) where we finish the discussion! If you subscribe you will get the new show automatically. Cool. Click these icons to share, thanks: tag:odeo.com,2009-07-30,24906062 Thu, 30 Jul 2009 13:59:28 -0700 no Handyguys Podcast podcast, DIY, home improvement, basement, Basement Finishing Series, Handyguys Podcast Category, hvac, air-conditioning, wood whisperer, Basement Living Systems, Basement Max, basement finishing systems, Beyond Basement, Basement Tuxedo, Ultimate Basement Makeover, Owens Corning, ductwork, Impressive Basement Systems Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24851813-Episode-73-%E2%80%93-Fixing-a-Kenmore-Elite-Dishwasher-that-is-not-Cleaning-Dishes Handyguy Paul Takes apart his Dishwasher to clean out the basin. The Handyguys planned to tackle two issues in this episode.  They began with Paul’s Dishwasher problems and hoped to talk about the Handyguy’s electrical toolkit.  However, the dishwasher took up the entire episode and the electrical toolkit discussion got pushed back to another show (ok… we sometimes record these episodes out-of-order so the electrical toolkit discussion was published with episode #70). So what is the problem with Paul’s dishwasher that is worth talking so long about?  Well, no one likes an expensive dishwasher that has problems doing the one thing it is supposed to do.  Cleaning Dishes!  Handyguy Paul’s wife was not happy about this arrangement.  Upon removing glasses from the dishwasher each morning, she was finding them covered in a cloudy white film.  Typically this is due to hard water and can be taken care of with a rinse aid product.  In this case, plenty of rinse ... Handyguy Paul Takes apart his Dishwasher to clean out the basin. The Handyguys planned to tackle two issues in this episode.  They began with Paul’s Dishwasher problems and hoped to talk about the Handyguy’s electrical toolkit.  However, the dishwasher took up the entire episode and the electrical toolkit discussion got pushed back to another show (ok… we sometimes record these episodes out-of-order so the electrical toolkit discussion was published with episode #70). So what is the problem with Paul’s dishwasher that is worth talking so long about?  Well, no one likes an expensive dishwasher that has problems doing the one thing it is supposed to do.  Cleaning Dishes!  Handyguy Paul’s wife was not happy about this arrangement.  Upon removing glasses from the dishwasher each morning, she was finding them covered in a cloudy white film.  Typically this is due to hard water and can be taken care of with a rinse aid product.  In this case, plenty of rinse aid was being used with no success. To make matters worse, the dishes on the top rack were also not being cleaned very well.  In fact, it appeared that the upper spray arm above the top rack was not spraying much of any water onto the dishes. So what was the solution to the white haze (or is it etching?) on the glasses?  And how do you fix these problems.  You can find the answer by listening to our podcast or watching our little video.  Or how about both?  Check it out. In addition, the Handyguys discuss other common dishwasher problems. Handyguys Podcast Fix of a Kenmore Elite Dishwasher from Handyguys Podcast on Vimeo. Thanks to erento for sponsoring this post – Whatever the magnitude or complexity of the project you wish to undertake, online tool hire will provide you necessary tools and equipment. Click these icons to share, thanks: Handyguy Paul Takes apart his Dishwasher to clean out the basin. The Handyguys planned to tackle two issues in this episode.  They began with Paul’s Dishwasher problems and hoped to talk about the Handyguy’s electrical toolkit.  However, the dishwasher took up the entire episode and the electrical toolkit discussion got pushed back to another show (ok… we sometimes record these episodes out-of-order so the electrical toolkit discussion was published with episode #70). So what is the problem with Paul’s dishwasher that is worth talking so long about?  Well, no one likes an expensive dishwasher that has problems doing the one thing it is supposed to do.  Cleaning Dishes!  Handyguy Paul’s wife was not happy about this arrangement.  Upon removing glasses from the dishwasher each morning, she was finding them covered in a cloudy white film.  Typically this is due to hard water and can be taken care of with a rinse aid product.  In this case, plenty of rinse aid was being used with no success. To make matters worse, the dishes on the top rack were also not being cleaned very well.  In fact, it appeared that the upper spray arm above the top rack was not spraying much of any water onto the dishes. So what was the solution to the white haze (or is it etching?) on the glasses?  And how do you fix these problems.  You can find the answer by listening to our podcast or watching our little video.  Or how about both?  Check it out. In addition, the Handyguys discuss other common dishwasher problems. Handyguys Podcast Fix of a Kenmore Elite Dishwasher from Handyguys Podcast on Vimeo. Thanks to erento for sponsoring this post – Whatever the magnitude or complexity of the project you wish to undertake, online tool hire will provide you necessary tools and equipment. Click these icons to share, thanks: tag:odeo.com,2009-07-23,24851813 Thu, 23 Jul 2009 13:59:29 -0700 no Handyguys Podcast podcast, home improvement, dishes, kenmore, dishwasher, elite, Handyguys Podcast Category, cloudy, Handyguys Video, dishwasher repair, spray arm, dirty dishes, lower rack, kenmore elite, 665.16293400, cloudy dishes, apliance repair Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24845083-Episode-72-%E2%80%93-Basement-Toilet-Installs-Water-Saving-Flush-Valves-and-Dryer-Vent-Cleaning Basement Toilet Installs, Water Saving Flush Valves and Dryer Vent Cleaning Saniflow Saniplus Toilet and pump system First off – The Handyguys begin by addressing a listener question. Julianne asks: Hi! I am considering purchasing a bi-level home. When you walk in the door, you have the choice of going upstairs where there is a kitchen, bathroom and 2 bedrooms… Or you have the choice of going downstairs, which is partially in the ground. It has a living room, laundry room and two bedrooms. My question is this: The downstairs portion does not have a bathroom. The only bathroom in the home is upstairs. Is it possible to add a bathroom to the downstairs portion of a bi-level home…or is this impossible since it is “underground” and you would have to find a way to flush the “sewage” upward? Thanks for your help.  I look forward to hearing from you soon! Julianne Short answer – yes! Listen to the podcast for Handyguy Brian & Paul discuss... Basement Toilet Installs, Water Saving Flush Valves and Dryer Vent Cleaning Saniflow Saniplus Toilet and pump system First off – The Handyguys begin by addressing a listener question. Julianne asks: Hi! I am considering purchasing a bi-level home. When you walk in the door, you have the choice of going upstairs where there is a kitchen, bathroom and 2 bedrooms… Or you have the choice of going downstairs, which is partially in the ground. It has a living room, laundry room and two bedrooms. My question is this: The downstairs portion does not have a bathroom. The only bathroom in the home is upstairs. Is it possible to add a bathroom to the downstairs portion of a bi-level home…or is this impossible since it is “underground” and you would have to find a way to flush the “sewage” upward? Thanks for your help.  I look forward to hearing from you soon! Julianne Short answer – yes! Listen to the podcast for Handyguy Brian & Paul discussing some issues to consider. Does this house have a city sewer drain or is it a septic system? Where does your sewer pipe enter the house? On some houses it enters at the floor (or under the floor) of the lower or basement level.  On other houses it enters about 4 feet high in the basement.  If it is above the basement floor, you will need to have an ejector/grinder pump installed.  This is typically best installed in a pit under the floor.  Concrete will have to be removed and you will have to determine where this can be located.  There is also a toilet which is sold with an above grade container which does not require you to cut into the concrete floor. You normally want to install the bathroom near where the sewer pipe enters the house for easier install.  If you want the bathroom on the opposite side of the lower level, then there would be more work/mess/expense involved Do you have room for the bathroom?  Is it a half or whole bath?  If I recall, you can get a very basic full bathroom in a 4′x8′ area but then you may need more space if installing an ejector pump pit. You will need to install a vent connection for the sink, bath and the pump. You will want to determine how you will be able to route the pipes to either the main vent stack (if large enough for these added plumbing devices) or where you can run a new pipe. The bottom line is that you should have a couple of professional plumbers size up the situation and provide you some quotes on the work to get a bathroom installed.  It can be complicated but it is certainly doable. Toilet Fill Valves The next topic that The Handygys discuss is fill valves for toilets. Handyguy Paul needed a new fill valve for his toilet. He ended up getting a leak sentry version from Fluidmaster. What is special about this fill valve? How does this help you save water? If you have a leak in the flapper and water is draining down the drain the valve wont keep filling the tank. Worst case, if you have a leak, you will loose down the drain only the water in the tank. You will also know you have a problem when you go to flush next time. Listen to the podcast for discussion of this product. Dryer vent Cleaning Lastly – The Handyguys discuss dryer vent cleaning. Dryer vents can be dangerous if the get clogged. According to the CPSC in 1998 clothes dryers caused over 15 thousand fires, 20 deaths and 370 injuries. Fires can occur when lint builds up in the exhaust. Handyguy Paul tested out The Linteater system and was quite happy with it. He almost got into a little trouble with it though. Paul – Read The Fine Manual next time! Listen to the podcast for discussion and impressions. Thanks to erento for sponsoring this post – Whatever the magnitude or complexity of the project you wish to undertake, online tool hire will provide you necessary tools and equipment. Click these icons to share, thanks: Basement Toilet Installs, Water Saving Flush Valves and Dryer Vent Cleaning Saniflow Saniplus Toilet and pump system First off – The Handyguys begin by addressing a listener question. Julianne asks: Hi! I am considering purchasing a bi-level home. When you walk in the door, you have the choice of going upstairs where there is a kitchen, bathroom and 2 bedrooms… Or you have the choice of going downstairs, which is partially in the ground. It has a living room, laundry room and two bedrooms. My question is this: The downstairs portion does not have a bathroom. The only bathroom in the home is upstairs. Is it possible to add a bathroom to the downstairs portion of a bi-level home…or is this impossible since it is “underground” and you would have to find a way to flush the “sewage” upward? Thanks for your help.  I look forward to hearing from you soon! Julianne Short answer – yes! Listen to the podcast for Handyguy Brian & Paul discussing some issues to consider. Does this house have a city sewer drain or is it a septic system? Where does your sewer pipe enter the house? On some houses it enters at the floor (or under the floor) of the lower or basement level.  On other houses it enters about 4 feet high in the basement.  If it is above the basement floor, you will need to have an ejector/grinder pump installed.  This is typically best installed in a pit under the floor.  Concrete will have to be removed and you will have to determine where this can be located.  There is also a toilet which is sold with an above grade container which does not require you to cut into the concrete floor. You normally want to install the bathroom near where the sewer pipe enters the house for easier install.  If you want the bathroom on the opposite side of the lower level, then there would be more work/mess/expense involved Do you have room for the bathroom?  Is it a half or whole bath?  If I recall, you can get a very basic full bathroom in a 4′x8′ area but then you may need more space if installing an ejector pump pit. You will need to install a vent connection for the sink, bath and the pump. You will want to determine how you will be able to route the pipes to either the main vent stack (if large enough for these added plumbing devices) or where you can run a new pipe. The bottom line is that you should have a couple of professional plumbers size up the situation and provide you some quotes on the work to get a bathroom installed.  It can be complicated but it is certainly doable. Toilet Fill Valves The next topic that The Handygys discuss is fill valves for toilets. Handyguy Paul needed a new fill valve for his toilet. He ended up getting a leak sentry version from Fluidmaster. What is special about this fill valve? How does this help you save water? If you have a leak in the flapper and water is draining down the drain the valve wont keep filling the tank. Worst case, if you have a leak, you will loose down the drain only the water in the tank. You will also know you have a problem when you go to flush next time. Listen to the podcast for discussion of this product. Dryer vent Cleaning Lastly – The Handyguys discuss dryer vent cleaning. Dryer vents can be dangerous if the get clogged. According to the CPSC in 1998 clothes dryers caused over 15 thousand fires, 20 deaths and 370 injuries. Fires can occur when lint builds up in the exhaust. Handyguy Paul tested out The Linteater system and was quite happy with it. He almost got into a little trouble with it though. Paul – Read The Fine Manual next time! Listen to the podcast for discussion and impressions. Thanks to erento for sponsoring this post – Whatever the magnitude or complexity of the project you wish to undertake, online tool hire will provide you necessary tools and equipment. Click these icons to share, thanks: tag:odeo.com,2009-07-16,24845083 Thu, 16 Jul 2009 13:59:25 -0700 no Handyguys Podcast podcast, cleaning, home improvement, toilet repair, duct, Basement Finishing Series, plumbing, Handyguys Podcast Category, dryer, Energy Savings, Home Safety, CPSC, water savings, vent cleaning, flush valve, 400ls, basement toilet, fluidmaster, dryer vent, lint, house fires, basement series, saniflo, duct fire Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24817786-Basement-Toilet-Installs-Water-Saving-Flush-Valves-and-Dryer-Vent-Cleaning Basement Toilet Installs, Water Saving Flush Valves and Dryer Vent Cleaning Saniflow Saniplus Toilet and pump system First off - The Handyguys begin by addressing a listener question. Julianne asks: Hi! I am considering purchasing a bi-level home. When you walk in the door, you have the choice of going upstairs where there is a kitchen, bathroom and 2 bedrooms… Or you have the choice of going downstairs, which is partially in the ground. It has a living room, laundry room and two bedrooms. My question is this: The downstairs portion does not have a bathroom. The only bathroom in the home is upstairs. Is it possible to add a bathroom to the downstairs portion of a bi-level home…or is this impossible since it is “underground” and you would have to find a way to flush the “sewage” upward? Thanks for your help.  I look forward to hearing from you soon! Julianne Short answer - yes! Listen to the podcast for Handyguy Brian & Paul discussing some iss... Basement Toilet Installs, Water Saving Flush Valves and Dryer Vent Cleaning Saniflow Saniplus Toilet and pump system First off - The Handyguys begin by addressing a listener question. Julianne asks: Hi! I am considering purchasing a bi-level home. When you walk in the door, you have the choice of going upstairs where there is a kitchen, bathroom and 2 bedrooms… Or you have the choice of going downstairs, which is partially in the ground. It has a living room, laundry room and two bedrooms. My question is this: The downstairs portion does not have a bathroom. The only bathroom in the home is upstairs. Is it possible to add a bathroom to the downstairs portion of a bi-level home…or is this impossible since it is “underground” and you would have to find a way to flush the “sewage” upward? Thanks for your help.  I look forward to hearing from you soon! Julianne Short answer - yes! Listen to the podcast for Handyguy Brian & Paul discussing some issues to consider. Does this house have a city sewer drain or is it a septic system? Where does your sewer pipe enter the house? On some houses it enters at the floor (or under the floor) of the lower or basement level.  On other houses it enters about 4 feet high in the basement.  If it is above the basement floor, you will need to have an ejector/grinder pump installed.  This is typically best installed in a pit under the floor.  Concrete will have to be removed and you will have to determine where this can be located.  There is also a toilet which is sold with an above grade container which does not require you to cut into the concrete floor. You normally want to install the bathroom near where the sewer pipe enters the house for easier install.  If you want the bathroom on the opposite side of the lower level, then there would be more work/mess/expense involved Do you have room for the bathroom?  Is it a half or whole bath?  If I recall, you can get a very basic full bathroom in a 4′x8′ area but then you may need more space if installing an ejector pump pit. You will need to install a vent connection for the sink, bath and the pump. You will want to determine how you will be able to route the pipes to either the main vent stack (if large enough for these added plumbing devices) or where you can run a new pipe. The bottom line is that you should have a couple of professional plumbers size up the situation and provide you some quotes on the work to get a bathroom installed.  It can be complicated but it is certainly doable. Toilet Fill Valves The next topic that The Handygys discuss is fill valves for toilets. Handyguy Paul needed a new fill valve for his toilet. He ended up getting a leak sentry version from Fluidmaster. What is special about this fill valve? How does this help you save water? If you have a leak in the flapper and water is draining down the drain the valve wont keep filling the tank. Worst case, if you have a leak, you will loose down the drain only the water in the tank. You will also know you have a problem when you go to flush next time. Listen to the podcast for discussion of this product. Dryer vent Cleaning Lastly - The Handyguys discuss dryer vent cleaning. Dryer vents can be dangerous if the get clogged. According to the CPSC in 1998 clothes dryers caused over 15 thousand fires, 20 deaths and 370 injuries. Fires can occur when lint builds up in the exhaust. Handyguy Paul tested out The Linteater system and was quite happy with it. He almost got into a little trouble with it though. Paul - Read The Fine Manual next time! Listen to the podcast for discussion and impressions. Thanks to erento for sponsoring this post - Whatever the magnitude or complexity of the project you wish to undertake, online tool hire will provide you necessary tools and equipment. Click these icons to share, thanks: Basement Toilet Installs, Water Saving Flush Valves and Dryer Vent Cleaning Saniflow Saniplus Toilet and pump system First off - The Handyguys begin by addressing a listener question. Julianne asks: Hi! I am considering purchasing a bi-level home. When you walk in the door, you have the choice of going upstairs where there is a kitchen, bathroom and 2 bedrooms… Or you have the choice of going downstairs, which is partially in the ground. It has a living room, laundry room and two bedrooms. My question is this: The downstairs portion does not have a bathroom. The only bathroom in the home is upstairs. Is it possible to add a bathroom to the downstairs portion of a bi-level home…or is this impossible since it is “underground” and you would have to find a way to flush the “sewage” upward? Thanks for your help.  I look forward to hearing from you soon! Julianne Short answer - yes! Listen to the podcast for Handyguy Brian & Paul discussing some issues to consider. Does this house have a city sewer drain or is it a septic system? Where does your sewer pipe enter the house? On some houses it enters at the floor (or under the floor) of the lower or basement level.  On other houses it enters about 4 feet high in the basement.  If it is above the basement floor, you will need to have an ejector/grinder pump installed.  This is typically best installed in a pit under the floor.  Concrete will have to be removed and you will have to determine where this can be located.  There is also a toilet which is sold with an above grade container which does not require you to cut into the concrete floor. You normally want to install the bathroom near where the sewer pipe enters the house for easier install.  If you want the bathroom on the opposite side of the lower level, then there would be more work/mess/expense involved Do you have room for the bathroom?  Is it a half or whole bath?  If I recall, you can get a very basic full bathroom in a 4′x8′ area but then you may need more space if installing an ejector pump pit. You will need to install a vent connection for the sink, bath and the pump. You will want to determine how you will be able to route the pipes to either the main vent stack (if large enough for these added plumbing devices) or where you can run a new pipe. The bottom line is that you should have a couple of professional plumbers size up the situation and provide you some quotes on the work to get a bathroom installed.  It can be complicated but it is certainly doable. Toilet Fill Valves The next topic that The Handygys discuss is fill valves for toilets. Handyguy Paul needed a new fill valve for his toilet. He ended up getting a leak sentry version from Fluidmaster. What is special about this fill valve? How does this help you save water? If you have a leak in the flapper and water is draining down the drain the valve wont keep filling the tank. Worst case, if you have a leak, you will loose down the drain only the water in the tank. You will also know you have a problem when you go to flush next time. Listen to the podcast for discussion of this product. Dryer vent Cleaning Lastly - The Handyguys discuss dryer vent cleaning. Dryer vents can be dangerous if the get clogged. According to the CPSC in 1998 clothes dryers caused over 15 thousand fires, 20 deaths and 370 injuries. Fires can occur when lint builds up in the exhaust. Handyguy Paul tested out The Linteater system and was quite happy with it. He almost got into a little trouble with it though. Paul - Read The Fine Manual next time! Listen to the podcast for discussion and impressions. Thanks to erento for sponsoring this post - Whatever the magnitude or complexity of the project you wish to undertake, online tool hire will provide you necessary tools and equipment. Click these icons to share, thanks: tag:odeo.com,2009-07-16,24817786 Thu, 16 Jul 2009 13:59:25 -0700 no Handyguys Podcast podcast, cleaning, home improvement, toilet repair, duct, Basement Finishing Series, plumbing, Handyguys Podcast Category, dryer, Energy Savings, Home Safety, CPSC, water savings, vent cleaning, flush valve, 400ls, basement toilet, fluidmaster, dryer vent, lint, house fires, basement series, saniflo, duct fire Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24776047-Episode-71-ZTR-Mower-Versus-Tractor Handyguys Try Out Some Riding Mowers The Handyguys are falling behind on the honey do list  because this year’s mowing season is taking all of their free time. Pennsylvania has been hit by lots of rain — making for nice fast growing lawns — but that comes with long hours of mowing. Handyguy Paul is researching a riding mower to replace his slow walk behind but is undecided as to the best model. Should he get a traditional lawn tractor or one of the zero turn radius models? To help Paul decide, the Handyguys called on John Deere to provide some samples for us to test. Listen to our podcast (Click Play) to hear analysis of these mowers  Also, don’t forget to subscribe so you don’t miss an episode. Click on the Image to see a larger version of the mowers we tested. John Deere was kind enough to loan us two models to try out. They didn’t sponsor this show nor did they let us keep the mowers.  Darn!  The two mowers were the Z445 with 54″ high capacity deck, ... Handyguys Try Out Some Riding Mowers The Handyguys are falling behind on the honey do list  because this year’s mowing season is taking all of their free time. Pennsylvania has been hit by lots of rain — making for nice fast growing lawns — but that comes with long hours of mowing. Handyguy Paul is researching a riding mower to replace his slow walk behind but is undecided as to the best model. Should he get a traditional lawn tractor or one of the zero turn radius models? To help Paul decide, the Handyguys called on John Deere to provide some samples for us to test. Listen to our podcast (Click Play) to hear analysis of these mowers  Also, don’t forget to subscribe so you don’t miss an episode. Click on the Image to see a larger version of the mowers we tested. John Deere was kind enough to loan us two models to try out. They didn’t sponsor this show nor did they let us keep the mowers.  Darn!  The two mowers were the Z445 with 54″ high capacity deck, the Zero Turn Radius ZTR model, and the X324 Tractor So, how did they test these mowers?  The first test was in a field that only gets mowed four or five times a year and has some tall grass and weeds. The second test was a residential property with some hills and a number of different obstacles from trees, deck stairs, flower beds, walks, etc. The third test was a larger residential property, also with some slope in sections but with deck posts to mow around and also flower beds, walks, a play area and so forth. The Handyguys started in the open field which was a good way to start. The ZTR takes several minutes to get used to the hand controls. To go forward with a ZTR you push both bars forward, to reverse pull both bars back. One forward and the other back and you pivot. You can easily make slight adjustments to your direction or you can also make sharp turns. Once they got used to the handling of the ZTR, they were moving briskly through the field with no problems.  They noticed that this ZTR was significantly faster than the tractor (not that the Handyguys tried to race these mowers… we would never do that!). The X324 has a steering wheel and gas pedal (actually two pedals… forward and reverse). This will be familiar to anyone who can drive a car. Its a very natural driving position and takes very little time to become proficient. One interesting feature that the Handyguys quickly appreciated on the X324 tractor was 4 wheel steering. The tractor could cut around a 9″ tree! The four wheel steer made it extremely maneuverable in tight spaces. Handyguy Paul contends that the tractor is a must have fashion accessory for those living in the “exoburbs”.  He felt a little too much like a landscaper on the ZTR. For Paul, its all about looking cool when you mow your grass! All kidding aside - there are some advantages to a tractor for many people. The tractor supports a wider variety of accessories. Things from snow throwers, shovels, sweepers, baggers, aerators, carts, snow blades, and spreaders can all be attached to a tractor such as the X324. If we were just mowing grass, and had a lot to do, the ZTR is a hands down winner. You can hear the full discussion by listening to the podcast. Also, if you want to see the mowers in action make sure you check out the video we put up last week. This post was sponsored by http://www.erento.co.uk/ where a Lawn Scarifier hire is the perfect way to ensure the growing of healthy grass and making your lawn and garden look beautiful. Click these icons to share, thanks: Handyguys Try Out Some Riding Mowers The Handyguys are falling behind on the honey do list  because this year’s mowing season is taking all of their free time. Pennsylvania has been hit by lots of rain — making for nice fast growing lawns — but that comes with long hours of mowing. Handyguy Paul is researching a riding mower to replace his slow walk behind but is undecided as to the best model. Should he get a traditional lawn tractor or one of the zero turn radius models? To help Paul decide, the Handyguys called on John Deere to provide some samples for us to test. Listen to our podcast (Click Play) to hear analysis of these mowers  Also, don’t forget to subscribe so you don’t miss an episode. Click on the Image to see a larger version of the mowers we tested. John Deere was kind enough to loan us two models to try out. They didn’t sponsor this show nor did they let us keep the mowers.  Darn!  The two mowers were the Z445 with 54″ high capacity deck, the Zero Turn Radius ZTR model, and the X324 Tractor So, how did they test these mowers?  The first test was in a field that only gets mowed four or five times a year and has some tall grass and weeds. The second test was a residential property with some hills and a number of different obstacles from trees, deck stairs, flower beds, walks, etc. The third test was a larger residential property, also with some slope in sections but with deck posts to mow around and also flower beds, walks, a play area and so forth. The Handyguys started in the open field which was a good way to start. The ZTR takes several minutes to get used to the hand controls. To go forward with a ZTR you push both bars forward, to reverse pull both bars back. One forward and the other back and you pivot. You can easily make slight adjustments to your direction or you can also make sharp turns. Once they got used to the handling of the ZTR, they were moving briskly through the field with no problems.  They noticed that this ZTR was significantly faster than the tractor (not that the Handyguys tried to race these mowers… we would never do that!). The X324 has a steering wheel and gas pedal (actually two pedals… forward and reverse). This will be familiar to anyone who can drive a car. Its a very natural driving position and takes very little time to become proficient. One interesting feature that the Handyguys quickly appreciated on the X324 tractor was 4 wheel steering. The tractor could cut around a 9″ tree! The four wheel steer made it extremely maneuverable in tight spaces. Handyguy Paul contends that the tractor is a must have fashion accessory for those living in the “exoburbs”.  He felt a little too much like a landscaper on the ZTR. For Paul, its all about looking cool when you mow your grass! All kidding aside - there are some advantages to a tractor for many people. The tractor supports a wider variety of accessories. Things from snow throwers, shovels, sweepers, baggers, aerators, carts, snow blades, and spreaders can all be attached to a tractor such as the X324. If we were just mowing grass, and had a lot to do, the ZTR is a hands down winner. You can hear the full discussion by listening to the podcast. Also, if you want to see the mowers in action make sure you check out the video we put up last week. This post was sponsored by http://www.erento.co.uk/ where a Lawn Scarifier hire is the perfect way to ensure the growing of healthy grass and making your lawn and garden look beautiful. Click these icons to share, thanks: tag:odeo.com,2009-07-09,24776047 Thu, 09 Jul 2009 13:59:57 -0700 no Handyguys Podcast podcast, DIY, home improvement, grass, mower, mowing, tractor, Handyguys Podcast Category, lawncare, evaluation, TroyBuilt, X324, ztr, Z445, Cub Cadette, Exmark, MTD, John Deere Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24834517-Episode-71-%E2%80%93-ZTR-Mower-Versus-Tractor Handyguys Try Out Some Riding Mowers The Handyguys are falling behind on the honey do list  because this year’s mowing season is taking all of their free time. Pennsylvania has been hit by lots of rain — making for nice fast growing lawns — but that comes with long hours of mowing. Handyguy Paul is researching a riding mower to replace his slow walk behind but is undecided as to the best model. Should he get a traditional lawn tractor or one of the zero turn radius models? To help Paul decide, the Handyguys called on John Deere to provide some samples for us to test. Listen to our podcast (Click Play) to hear analysis of these mowers  Also, don’t forget to subscribe so you don’t miss an episode. Click on the Image to see a larger version of the mowers we tested. John Deere was kind enough to loan us two models to try out. They didn’t sponsor this show nor did they let us keep the mowers.  Darn!  The two mowers were the Z445 with 54″ high capacity deck, ... Handyguys Try Out Some Riding Mowers The Handyguys are falling behind on the honey do list  because this year’s mowing season is taking all of their free time. Pennsylvania has been hit by lots of rain — making for nice fast growing lawns — but that comes with long hours of mowing. Handyguy Paul is researching a riding mower to replace his slow walk behind but is undecided as to the best model. Should he get a traditional lawn tractor or one of the zero turn radius models? To help Paul decide, the Handyguys called on John Deere to provide some samples for us to test. Listen to our podcast (Click Play) to hear analysis of these mowers  Also, don’t forget to subscribe so you don’t miss an episode. Click on the Image to see a larger version of the mowers we tested. John Deere was kind enough to loan us two models to try out. They didn’t sponsor this show nor did they let us keep the mowers.  Darn!  The two mowers were the Z445 with 54″ high capacity deck, the Zero Turn Radius ZTR model, and the X324 Tractor So, how did they test these mowers?  The first test was in a field that only gets mowed four or five times a year and has some tall grass and weeds. The second test was a residential property with some hills and a number of different obstacles from trees, deck stairs, flower beds, walks, etc. The third test was a larger residential property, also with some slope in sections but with deck posts to mow around and also flower beds, walks, a play area and so forth. The Handyguys started in the open field which was a good way to start. The ZTR takes several minutes to get used to the hand controls. To go forward with a ZTR you push both bars forward, to reverse pull both bars back. One forward and the other back and you pivot. You can easily make slight adjustments to your direction or you can also make sharp turns. Once they got used to the handling of the ZTR, they were moving briskly through the field with no problems.  They noticed that this ZTR was significantly faster than the tractor (not that the Handyguys tried to race these mowers… we would never do that!). The X324 has a steering wheel and gas pedal (actually two pedals… forward and reverse). This will be familiar to anyone who can drive a car. Its a very natural driving position and takes very little time to become proficient. One interesting feature that the Handyguys quickly appreciated on the X324 tractor was 4 wheel steering. The tractor could cut around a 9″ tree! The four wheel steer made it extremely maneuverable in tight spaces. Handyguy Paul contends that the tractor is a must have fashion accessory for those living in the “exoburbs”.  He felt a little too much like a landscaper on the ZTR. For Paul, its all about looking cool when you mow your grass! All kidding aside – there are some advantages to a tractor for many people. The tractor supports a wider variety of accessories. Things from snow throwers, shovels, sweepers, baggers, aerators, carts, snow blades, and spreaders can all be attached to a tractor such as the X324. If we were just mowing grass, and had a lot to do, the ZTR is a hands down winner. You can hear the full discussion by listening to the podcast. Also, if you want to see the mowers in action make sure you check out the video we put up last week. This post was sponsored by http://www.erento.co.uk/ where a Lawn Scarifier hire is the perfect way to ensure the growing of healthy grass and making your lawn and garden look beautiful. Click these icons to share, thanks: Handyguys Try Out Some Riding Mowers The Handyguys are falling behind on the honey do list  because this year’s mowing season is taking all of their free time. Pennsylvania has been hit by lots of rain — making for nice fast growing lawns — but that comes with long hours of mowing. Handyguy Paul is researching a riding mower to replace his slow walk behind but is undecided as to the best model. Should he get a traditional lawn tractor or one of the zero turn radius models? To help Paul decide, the Handyguys called on John Deere to provide some samples for us to test. Listen to our podcast (Click Play) to hear analysis of these mowers  Also, don’t forget to subscribe so you don’t miss an episode. Click on the Image to see a larger version of the mowers we tested. John Deere was kind enough to loan us two models to try out. They didn’t sponsor this show nor did they let us keep the mowers.  Darn!  The two mowers were the Z445 with 54″ high capacity deck, the Zero Turn Radius ZTR model, and the X324 Tractor So, how did they test these mowers?  The first test was in a field that only gets mowed four or five times a year and has some tall grass and weeds. The second test was a residential property with some hills and a number of different obstacles from trees, deck stairs, flower beds, walks, etc. The third test was a larger residential property, also with some slope in sections but with deck posts to mow around and also flower beds, walks, a play area and so forth. The Handyguys started in the open field which was a good way to start. The ZTR takes several minutes to get used to the hand controls. To go forward with a ZTR you push both bars forward, to reverse pull both bars back. One forward and the other back and you pivot. You can easily make slight adjustments to your direction or you can also make sharp turns. Once they got used to the handling of the ZTR, they were moving briskly through the field with no problems.  They noticed that this ZTR was significantly faster than the tractor (not that the Handyguys tried to race these mowers… we would never do that!). The X324 has a steering wheel and gas pedal (actually two pedals… forward and reverse). This will be familiar to anyone who can drive a car. Its a very natural driving position and takes very little time to become proficient. One interesting feature that the Handyguys quickly appreciated on the X324 tractor was 4 wheel steering. The tractor could cut around a 9″ tree! The four wheel steer made it extremely maneuverable in tight spaces. Handyguy Paul contends that the tractor is a must have fashion accessory for those living in the “exoburbs”.  He felt a little too much like a landscaper on the ZTR. For Paul, its all about looking cool when you mow your grass! All kidding aside – there are some advantages to a tractor for many people. The tractor supports a wider variety of accessories. Things from snow throwers, shovels, sweepers, baggers, aerators, carts, snow blades, and spreaders can all be attached to a tractor such as the X324. If we were just mowing grass, and had a lot to do, the ZTR is a hands down winner. You can hear the full discussion by listening to the podcast. Also, if you want to see the mowers in action make sure you check out the video we put up last week. This post was sponsored by http://www.erento.co.uk/ where a Lawn Scarifier hire is the perfect way to ensure the growing of healthy grass and making your lawn and garden look beautiful. Click these icons to share, thanks: tag:odeo.com,2009-07-09,24834517 Thu, 09 Jul 2009 13:59:57 -0700 no Handyguys Podcast podcast, DIY, home improvement, tools, grass, mower, mowing, tractor, Handyguys Podcast Category, lawncare, evaluation, TroyBuilt, X324, ztr, Z445, Cub Cadette, Exmark, MTD, John Deere Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24757445-Episode-70-Electrical-Toolkit-and-Surviving-a-Power-Outage First up the electrical tool kit we talk about some key tools for doing electrical work and comment on an article in Fine Homebuilding called An Electrical Tool Kit by Brian Walo. Fine Homebuilding says (About Brian Walo’s article): He recommends three electrical testers, a variety of drivers (Phillips head, flat head, nut driver, and Robertson drivers), pliers (side-cutting, crimpers, strippers, end cut, and needle nose), and materials (electrical tape, wire nuts, crimping sleeves, bonding screws, cable clamps, staples, and screws). Well we discuss what a typical handyguy may want to have and share some of our own favorites in the podcast. Below are some must haves. Testers Well, we think there should be several types of testers. Some simple, some fancier, depending on what you are testing. The three types each have different purposes. First - A non-contact voltage Tester. This type of tester can tell you if you if a wire is “hot” without needing to remove a wire ... First up the electrical tool kit we talk about some key tools for doing electrical work and comment on an article in Fine Homebuilding called An Electrical Tool Kit by Brian Walo. Fine Homebuilding says (About Brian Walo’s article): He recommends three electrical testers, a variety of drivers (Phillips head, flat head, nut driver, and Robertson drivers), pliers (side-cutting, crimpers, strippers, end cut, and needle nose), and materials (electrical tape, wire nuts, crimping sleeves, bonding screws, cable clamps, staples, and screws). Well we discuss what a typical handyguy may want to have and share some of our own favorites in the podcast. Below are some must haves. Testers Well, we think there should be several types of testers. Some simple, some fancier, depending on what you are testing. The three types each have different purposes. First - A non-contact voltage Tester. This type of tester can tell you if you if a wire is “hot” without needing to remove a wire nut. Its a good first check but many recommend that you also use a true voltage meter to be positive the electric is off before you work on something. Second - A tester that checks for correct wiring. These are simple devices that you plug into a receptacle and indicator lights tell you if its wired correctly. The one in our kit below also can test GFCIs. Lastly - A voltage meter - A voltage meter is used to measure the voltage on a particular wire or for testing continuity. It can also test batteries and other low voltage circuits. This kit from Greenlee includes all three at a good price. http://astore.amazon.com/handyguys-20/detail/B000FCIMFS Drivers Screwdrivers are needed. For electrical work a number of different sizes and styles are needed. The Handyguys and the author of the Fine Homebuilding article all despise “standard” or slotted screwdrivers but they are a necessary part of the process. You couldn’t install a faceplate without one. Many of the older devices only have slotted screw heads. You will need two sizes of slotted, small and medium. Philips is pretty common these days and a decent #2 Philips is probably your most used size. Many of the newest devices use square drive or robertson tips. They give very good positive grip on the screw heads. This set from Klein http://astore.amazon.com/handyguys-20/detail/B000MKMIH6 is top of the line and wont break the bank. It includes all the sizes you would need except the square drive The square drive http://astore.amazon.com/handyguys-20/detail/B00093D6YU can be bought separately. This square drive screwdriver also has a little hook right below the handle for bending wire. It really speeds up the job of putting in outlets and switches because you do not need to reach for your pliers to put the bend on the end of a wire you are going to terminate. Pliers Get the best pair of “linemans pliers” http://astore.amazon.com/handyguys-20/detail/B0000302W6 you can buy. Cheap ones will dull, chip and generally frustrate you . They are used for many things from cutting, twisting, crimping and pulling. Strippers - You can strip wire with a pocket knife or even your linemans pliers. A tool dedicated to the task will be easier and faster. http://astore.amazon.com/handyguys-20/detail/B00080DPNQ Miscellaneous In the podcast we also go into a lot of other items such as wire nuts, screws, crimps, clamps, staples and so forth. If you want links to any of that just use our contact form and we will get them for you. Tips Have some extra screws handy. 8/32 and 6/32 will be the most common size. For fishing wire the author uses a 10′ piece of pex tubing. Read the article for how that works. When the power goes out. The music provided at the beginning of this segment is from Mevio’s Music Alley. Check it out at music.mevio.com When would you use a portable generator and when would you want a standby generator? The Handyguys discuss the options and pros and cons of different types. Bottom line - when using a portable generator make sure you follow all of the safety rules provided in the owners manual. This post is sponsored by erento - Whatever the magnitude or complexity of the project you wish to undertake, online tool hire will provide you necessary tools and equipment. Click these icons to share, thanks: First up the electrical tool kit we talk about some key tools for doing electrical work and comment on an article in Fine Homebuilding called An Electrical Tool Kit by Brian Walo. Fine Homebuilding says (About Brian Walo’s article): He recommends three electrical testers, a variety of drivers (Phillips head, flat head, nut driver, and Robertson drivers), pliers (side-cutting, crimpers, strippers, end cut, and needle nose), and materials (electrical tape, wire nuts, crimping sleeves, bonding screws, cable clamps, staples, and screws). Well we discuss what a typical handyguy may want to have and share some of our own favorites in the podcast. Below are some must haves. Testers Well, we think there should be several types of testers. Some simple, some fancier, depending on what you are testing. The three types each have different purposes. First - A non-contact voltage Tester. This type of tester can tell you if you if a wire is “hot” without needing to remove a wire nut. Its a good first check but many recommend that you also use a true voltage meter to be positive the electric is off before you work on something. Second - A tester that checks for correct wiring. These are simple devices that you plug into a receptacle and indicator lights tell you if its wired correctly. The one in our kit below also can test GFCIs. Lastly - A voltage meter - A voltage meter is used to measure the voltage on a particular wire or for testing continuity. It can also test batteries and other low voltage circuits. This kit from Greenlee includes all three at a good price. http://astore.amazon.com/handyguys-20/detail/B000FCIMFS Drivers Screwdrivers are needed. For electrical work a number of different sizes and styles are needed. The Handyguys and the author of the Fine Homebuilding article all despise “standard” or slotted screwdrivers but they are a necessary part of the process. You couldn’t install a faceplate without one. Many of the older devices only have slotted screw heads. You will need two sizes of slotted, small and medium. Philips is pretty common these days and a decent #2 Philips is probably your most used size. Many of the newest devices use square drive or robertson tips. They give very good positive grip on the screw heads. This set from Klein http://astore.amazon.com/handyguys-20/detail/B000MKMIH6 is top of the line and wont break the bank. It includes all the sizes you would need except the square drive The square drive http://astore.amazon.com/handyguys-20/detail/B00093D6YU can be bought separately. This square drive screwdriver also has a little hook right below the handle for bending wire. It really speeds up the job of putting in outlets and switches because you do not need to reach for your pliers to put the bend on the end of a wire you are going to terminate. Pliers Get the best pair of “linemans pliers” http://astore.amazon.com/handyguys-20/detail/B0000302W6 you can buy. Cheap ones will dull, chip and generally frustrate you . They are used for many things from cutting, twisting, crimping and pulling. Strippers - You can strip wire with a pocket knife or even your linemans pliers. A tool dedicated to the task will be easier and faster. http://astore.amazon.com/handyguys-20/detail/B00080DPNQ Miscellaneous In the podcast we also go into a lot of other items such as wire nuts, screws, crimps, clamps, staples and so forth. If you want links to any of that just use our contact form and we will get them for you. Tips Have some extra screws handy. 8/32 and 6/32 will be the most common size. For fishing wire the author uses a 10′ piece of pex tubing. Read the article for how that works. When the power goes out. The music provided at the beginning of this segment is from Mevio’s Music Alley. Check it out at music.mevio.com When would you use a portable generator and when would you want a standby generator? The Handyguys discuss the options and pros and cons of different types. Bottom line - when using a portable generator make sure you follow all of the safety rules provided in the owners manual. This post is sponsored by erento - Whatever the magnitude or complexity of the project you wish to undertake, online tool hire will provide you necessary tools and equipment. Click these icons to share, thanks: tag:odeo.com,2009-06-25,24757445 Thu, 25 Jun 2009 14:59:02 -0700 no Handyguys Podcast drive, screwdriver, strippers, pliers, needle nose pliers, klein, screws, generators, robertson, square, phillips, wiring, electrical, Handyguys Podcast Category, Stripper, staples, lineman, screwdrivers, wire stripper, transfer switch, Brian Walo, standby generator, fish wire, wire strippers, wire nuts, electrical strippers, Fine Homebuilding, crimps, testers, portable generator, Generac, cable clamps, gfci tester, greenlee, non-contact voltage tester, clamps, linemans, voltage tester, linemans pliers, romex, crimper, electrical testers Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24834518-Episode-70-%E2%80%93-Electrical-Toolkit-and-Surviving-a-Power-Outage First up the electrical tool kit we talk about some key tools for doing electrical work and comment on an article in Fine Homebuilding called An Electrical Tool Kit by Brian Walo. Fine Homebuilding says (About Brian Walo’s article): He recommends three electrical testers, a variety of drivers (Phillips head, flat head, nut driver, and Robertson drivers), pliers (side-cutting, crimpers, strippers, end cut, and needle nose), and materials (electrical tape, wire nuts, crimping sleeves, bonding screws, cable clamps, staples, and screws). Well we discuss what a typical handyguy may want to have and share some of our own favorites in the podcast. Below are some must haves. Testers Well, we think there should be several types of testers. Some simple, some fancier, depending on what you are testing. The three types each have different purposes. First – A non-contact voltage Tester. This type of tester can tell you if you if a wire is “hot” without needing to remove a... First up the electrical tool kit we talk about some key tools for doing electrical work and comment on an article in Fine Homebuilding called An Electrical Tool Kit by Brian Walo. Fine Homebuilding says (About Brian Walo’s article): He recommends three electrical testers, a variety of drivers (Phillips head, flat head, nut driver, and Robertson drivers), pliers (side-cutting, crimpers, strippers, end cut, and needle nose), and materials (electrical tape, wire nuts, crimping sleeves, bonding screws, cable clamps, staples, and screws). Well we discuss what a typical handyguy may want to have and share some of our own favorites in the podcast. Below are some must haves. Testers Well, we think there should be several types of testers. Some simple, some fancier, depending on what you are testing. The three types each have different purposes. First – A non-contact voltage Tester. This type of tester can tell you if you if a wire is “hot” without needing to remove a wire nut. Its a good first check but many recommend that you also use a true voltage meter to be positive the electric is off before you work on something. Second – A tester that checks for correct wiring. These are simple devices that you plug into a receptacle and indicator lights tell you if its wired correctly. The one in our kit below also can test GFCIs. Lastly – A voltage meter – A voltage meter is used to measure the voltage on a particular wire or for testing continuity. It can also test batteries and other low voltage circuits. This kit from Greenlee includes all three at a good price. http://astore.amazon.com/handyguys-20/detail/B000FCIMFS Drivers Screwdrivers are needed. For electrical work a number of different sizes and styles are needed. The Handyguys and the author of the Fine Homebuilding article all despise “standard” or slotted screwdrivers but they are a necessary part of the process. You couldn’t install a faceplate without one. Many of the older devices only have slotted screw heads. You will need two sizes of slotted, small and medium. Philips is pretty common these days and a decent #2 Philips is probably your most used size. Many of the newest devices use square drive or robertson tips. They give very good positive grip on the screw heads. This set from Klein http://astore.amazon.com/handyguys-20/detail/B000MKMIH6 is top of the line and wont break the bank. It includes all the sizes you would need except the square drive The square drive http://astore.amazon.com/handyguys-20/detail/B00093D6YU can be bought separately. This square drive screwdriver also has a little hook right below the handle for bending wire. It really speeds up the job of putting in outlets and switches because you do not need to reach for your pliers to put the bend on the end of a wire you are going to terminate. Pliers Get the best pair of “linemans pliers” http://astore.amazon.com/handyguys-20/detail/B0000302W6 you can buy. Cheap ones will dull, chip and generally frustrate you . They are used for many things from cutting, twisting, crimping and pulling. Strippers – You can strip wire with a pocket knife or even your linemans pliers. A tool dedicated to the task will be easier and faster. http://astore.amazon.com/handyguys-20/detail/B00080DPNQ Miscellaneous In the podcast we also go into a lot of other items such as wire nuts, screws, crimps, clamps, staples and so forth. If you want links to any of that just use our contact form and we will get them for you. Tips Have some extra screws handy. 8/32 and 6/32 will be the most common size. For fishing wire the author uses a 10′ piece of pex tubing. Read the article for how that works. When the power goes out. The music provided at the beginning of this segment is from Mevio’s Music Alley. Check it out at music.mevio.com When would you use a portable generator and when would you want a standby generator? The Handyguys discuss the options and pros and cons of different types. Bottom line – when using a portable generator make sure you follow all of the safety rules provided in the owners manual. This post is sponsored by erento – Whatever the magnitude or complexity of the project you wish to undertake, online tool hire will provide you necessary tools and equipment. Click these icons to share, thanks: First up the electrical tool kit we talk about some key tools for doing electrical work and comment on an article in Fine Homebuilding called An Electrical Tool Kit by Brian Walo. Fine Homebuilding says (About Brian Walo’s article): He recommends three electrical testers, a variety of drivers (Phillips head, flat head, nut driver, and Robertson drivers), pliers (side-cutting, crimpers, strippers, end cut, and needle nose), and materials (electrical tape, wire nuts, crimping sleeves, bonding screws, cable clamps, staples, and screws). Well we discuss what a typical handyguy may want to have and share some of our own favorites in the podcast. Below are some must haves. Testers Well, we think there should be several types of testers. Some simple, some fancier, depending on what you are testing. The three types each have different purposes. First – A non-contact voltage Tester. This type of tester can tell you if you if a wire is “hot” without needing to remove a wire nut. Its a good first check but many recommend that you also use a true voltage meter to be positive the electric is off before you work on something. Second – A tester that checks for correct wiring. These are simple devices that you plug into a receptacle and indicator lights tell you if its wired correctly. The one in our kit below also can test GFCIs. Lastly – A voltage meter – A voltage meter is used to measure the voltage on a particular wire or for testing continuity. It can also test batteries and other low voltage circuits. This kit from Greenlee includes all three at a good price. http://astore.amazon.com/handyguys-20/detail/B000FCIMFS Drivers Screwdrivers are needed. For electrical work a number of different sizes and styles are needed. The Handyguys and the author of the Fine Homebuilding article all despise “standard” or slotted screwdrivers but they are a necessary part of the process. You couldn’t install a faceplate without one. Many of the older devices only have slotted screw heads. You will need two sizes of slotted, small and medium. Philips is pretty common these days and a decent #2 Philips is probably your most used size. Many of the newest devices use square drive or robertson tips. They give very good positive grip on the screw heads. This set from Klein http://astore.amazon.com/handyguys-20/detail/B000MKMIH6 is top of the line and wont break the bank. It includes all the sizes you would need except the square drive The square drive http://astore.amazon.com/handyguys-20/detail/B00093D6YU can be bought separately. This square drive screwdriver also has a little hook right below the handle for bending wire. It really speeds up the job of putting in outlets and switches because you do not need to reach for your pliers to put the bend on the end of a wire you are going to terminate. Pliers Get the best pair of “linemans pliers” http://astore.amazon.com/handyguys-20/detail/B0000302W6 you can buy. Cheap ones will dull, chip and generally frustrate you . They are used for many things from cutting, twisting, crimping and pulling. Strippers – You can strip wire with a pocket knife or even your linemans pliers. A tool dedicated to the task will be easier and faster. http://astore.amazon.com/handyguys-20/detail/B00080DPNQ Miscellaneous In the podcast we also go into a lot of other items such as wire nuts, screws, crimps, clamps, staples and so forth. If you want links to any of that just use our contact form and we will get them for you. Tips Have some extra screws handy. 8/32 and 6/32 will be the most common size. For fishing wire the author uses a 10′ piece of pex tubing. Read the article for how that works. When the power goes out. The music provided at the beginning of this segment is from Mevio’s Music Alley. Check it out at music.mevio.com When would you use a portable generator and when would you want a standby generator? The Handyguys discuss the options and pros and cons of different types. Bottom line – when using a portable generator make sure you follow all of the safety rules provided in the owners manual. This post is sponsored by erento – Whatever the magnitude or complexity of the project you wish to undertake, online tool hire will provide you necessary tools and equipment. Click these icons to share, thanks: tag:odeo.com,2009-06-25,24834518 Thu, 25 Jun 2009 14:59:02 -0700 no Handyguys Podcast drive, screwdriver, strippers, pliers, needle nose pliers, klein, screws, generators, robertson, square, phillips, wiring, electrical, Handyguys Podcast Category, Stripper, staples, lineman, screwdrivers, wire stripper, transfer switch, Brian Walo, standby generator, fish wire, wire strippers, wire nuts, electrical strippers, Fine Homebuilding, crimps, testers, portable generator, Generac, cable clamps, gfci tester, greenlee, non-contact voltage tester, clamps, linemans, voltage tester, linemans pliers, romex, crimper, electrical testers Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24726084-Episode-69-%E2%80%93-Air-conditioning-Troubleshooting-checklist In this episode of The Handyguys Podcast we discuss air-conditioning. Air-conditioning is not something the typical handyguy or girl is familiar with. We turn it on and expect it to work as designed. What can we do if it doesn’t cool? Are there specific things to look for before calling in a pro to troubleshoot? With high humidity and soaring temperatures this summer, the last thing you want to deal with is a broken air conditioner. But when an old air conditioning system fails, you will be faced with the tough and often expensive decision of whether to repair the existing system or purchase a new one. Repairs on an existing unit may be the least expensive immediate option, but could cost you more in the long run since older systems tend to break down over and over and consume more energy and drive up cooling bills more than newer systems. However, there are times when simple repairs can prolong the life of an air conditioner, making immediate replacement a less sensible optio... In this episode of The Handyguys Podcast we discuss air-conditioning. Air-conditioning is not something the typical handyguy or girl is familiar with. We turn it on and expect it to work as designed. What can we do if it doesn’t cool? Are there specific things to look for before calling in a pro to troubleshoot? With high humidity and soaring temperatures this summer, the last thing you want to deal with is a broken air conditioner. But when an old air conditioning system fails, you will be faced with the tough and often expensive decision of whether to repair the existing system or purchase a new one. Repairs on an existing unit may be the least expensive immediate option, but could cost you more in the long run since older systems tend to break down over and over and consume more energy and drive up cooling bills more than newer systems. However, there are times when simple repairs can prolong the life of an air conditioner, making immediate replacement a less sensible option. Since the Handyguys are not experts in this area and we want to help you make an educated decision, consider the following tips from Bill Cunningham, a home cooling and energy efficiency expert with Lennox. Bill shares a great deal of wisdom and experience with residential central air-conditioning systems, regardless of who manufactures your system. He suggests homeowners ask the following three questions before making the decision whether to repair or replace: Is the air conditioner on its last leg? Excessive energy consumption and frequent repairs are the trademarks of a worn-out system. If the air conditioner is more than 10 years old, replacing the aging system with a new ENERGY STAR-qualified system can save time, money, and headaches - and keep you cooler and more comfortable in the long run. If the system is less than 10 years old, routine maintenance is almost always the way to go. In fact, an annual check-up can significantly increase the air conditioner’s performance and extend the life of the unit. Listen to the podcast for more information. Are your energy bills going up, up and up? While the cost of electricity is on the rise, an older, less efficient air conditioner may also be the culprit when it comes to high energy bills. By replacing an 8 SEER (seasonal energy efficiency rating) cooling system, which is much less efficient than the current SEER level allowed by law, with a 15 SEER system, homeowners can save approximately 47 percent on energy bills and up to $3,095 over a five-year period. Energy calculators, such as the one available on the Lennox site can help consumers compare the savings of different high-efficiency systems and determine whether to repair or replace an older unit. Listen to the podcast for more information. Did your home feel like a steam room even before the air conditioner stopped working? A poorly operating air conditioner or one that is not properly sized for the home can contribute to excessive humidity. Leaky ductwork can also cause humidity problems. When making the decision to repair or replace, talk with a reputable home cooling contractor about the humidity problem to determine if you need to replace the existing system with one that is the right size for the home or if the issue can be resolved with repairs or duct sealing. Listen to the podcast for more information. We also discuss with Bill a few things you can check yourself before calling a service tech. Does your thermostat use batteries? Many of the fancier thermostats use batteries. If your batteries are dead your system will not work. Did a breaker trip? Its an easy check and will save you the cost of a service call. Look for a tripped breaker if you have no fan or no cooling. You likely have separate breakers for each. Did someone turn it off? Systems usually have switches for killing the power before service. There will be one near your outside unit as well as near your inside unit. There may also be a switch at the top of your basement stairs or somewhere nearby. Listen to the podcast for more information. Don’t forget - If you like this content you can subscribe and get it on your MP3 player or notifications in your email of new shows. You can also follow us on twitter. Thanks to http://www.erento.co.uk for sponsoring this post - For the outside parties and cold evenings patio heater hire will keep your guests warm. Click these icons to share, thanks: In this episode of The Handyguys Podcast we discuss air-conditioning. Air-conditioning is not something the typical handyguy or girl is familiar with. We turn it on and expect it to work as designed. What can we do if it doesn’t cool? Are there specific things to look for before calling in a pro to troubleshoot? With high humidity and soaring temperatures this summer, the last thing you want to deal with is a broken air conditioner. But when an old air conditioning system fails, you will be faced with the tough and often expensive decision of whether to repair the existing system or purchase a new one. Repairs on an existing unit may be the least expensive immediate option, but could cost you more in the long run since older systems tend to break down over and over and consume more energy and drive up cooling bills more than newer systems. However, there are times when simple repairs can prolong the life of an air conditioner, making immediate replacement a less sensible option. Since the Handyguys are not experts in this area and we want to help you make an educated decision, consider the following tips from Bill Cunningham, a home cooling and energy efficiency expert with Lennox. Bill shares a great deal of wisdom and experience with residential central air-conditioning systems, regardless of who manufactures your system. He suggests homeowners ask the following three questions before making the decision whether to repair or replace: Is the air conditioner on its last leg? Excessive energy consumption and frequent repairs are the trademarks of a worn-out system. If the air conditioner is more than 10 years old, replacing the aging system with a new ENERGY STAR-qualified system can save time, money, and headaches - and keep you cooler and more comfortable in the long run. If the system is less than 10 years old, routine maintenance is almost always the way to go. In fact, an annual check-up can significantly increase the air conditioner’s performance and extend the life of the unit. Listen to the podcast for more information. Are your energy bills going up, up and up? While the cost of electricity is on the rise, an older, less efficient air conditioner may also be the culprit when it comes to high energy bills. By replacing an 8 SEER (seasonal energy efficiency rating) cooling system, which is much less efficient than the current SEER level allowed by law, with a 15 SEER system, homeowners can save approximately 47 percent on energy bills and up to $3,095 over a five-year period. Energy calculators, such as the one available on the Lennox site can help consumers compare the savings of different high-efficiency systems and determine whether to repair or replace an older unit. Listen to the podcast for more information. Did your home feel like a steam room even before the air conditioner stopped working? A poorly operating air conditioner or one that is not properly sized for the home can contribute to excessive humidity. Leaky ductwork can also cause humidity problems. When making the decision to repair or replace, talk with a reputable home cooling contractor about the humidity problem to determine if you need to replace the existing system with one that is the right size for the home or if the issue can be resolved with repairs or duct sealing. Listen to the podcast for more information. We also discuss with Bill a few things you can check yourself before calling a service tech. Does your thermostat use batteries? Many of the fancier thermostats use batteries. If your batteries are dead your system will not work. Did a breaker trip? Its an easy check and will save you the cost of a service call. Look for a tripped breaker if you have no fan or no cooling. You likely have separate breakers for each. Did someone turn it off? Systems usually have switches for killing the power before service. There will be one near your outside unit as well as near your inside unit. There may also be a switch at the top of your basement stairs or somewhere nearby. Listen to the podcast for more information. Don’t forget - If you like this content you can subscribe and get it on your MP3 player or notifications in your email of new shows. You can also follow us on twitter. Thanks to http://www.erento.co.uk for sponsoring this post - For the outside parties and cold evenings patio heater hire will keep your guests warm. Click these icons to share, thanks: tag:odeo.com,2009-06-18,24726084 Thu, 18 Jun 2009 13:59:43 -0700 no Handyguys Podcast cost, repair, DIY, home improvement, cooling, replace, lennox, AC, Handyguys Podcast Category, hvac, thermostat, air-conditioning, Energy Savings, Energy Star, seer, energy consumption, seasonal energy efficiency rating, energy bills, humidity, routine maintenance, Bill Cunningham, Leaky ductwork Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24692097-Episode-68-Synthetic-Decks-and-GFCI-Outlets The newest generation of synthetc decking looks much more like real wood and has a much longer warranty. Synthetic Decking Material and a Fiberon Warranty The Handyguys begin the show by talking about whats new in Synthetic decking. Composites versus PVC. While composite decking appear to be maintenance free, some manufactured decks become marred with mold, staining and deterioration. There are many newer synthetic decking materials that now have long warranties. One such synthetic decking material, with a 10 year warranty, is Fiberon. Making the decision to choose a synthetic deck versus a real wood deck can be daunting. What is your budget? What look do you want? Can you be careful about not staining the deck with a dropped hamburger or plate of buttered corn? Listener Question On New Electrical Outlets We answered a question from  James  regarding adding outlets to front and back porch and attic. James wrote us Hi guys, love the podcast. I’ve listened to every one so far. Q... The newest generation of synthetc decking looks much more like real wood and has a much longer warranty. Synthetic Decking Material and a Fiberon Warranty The Handyguys begin the show by talking about whats new in Synthetic decking. Composites versus PVC. While composite decking appear to be maintenance free, some manufactured decks become marred with mold, staining and deterioration. There are many newer synthetic decking materials that now have long warranties. One such synthetic decking material, with a 10 year warranty, is Fiberon. Making the decision to choose a synthetic deck versus a real wood deck can be daunting. What is your budget? What look do you want? Can you be careful about not staining the deck with a dropped hamburger or plate of buttered corn? Listener Question On New Electrical Outlets We answered a question from  James  regarding adding outlets to front and back porch and attic. James wrote us Hi guys, love the podcast. I’ve listened to every one so far. Quick question for you: We got our house last august, a 3 story, brick Victorian that will be 100 years old next year. It’s in surprisingly good shape, the home inspector thought so, and we agreed with him. Our only problem was the electrical system. They still had some active knob and tube wiring in the home and the insurance company refused to insure it until it was updated. The owners agreed to update it to a 100 amp service, we asked about upgrading it to 200 and we would split the difference, but the electrician wanted $2000 extra so we went with the 100 amp. Anyway to make a long story short (I know, TOO LATE!) There are 3 places where there’s little or no electricity. 2 of the places are on the front and back porches. There are outlets inside the house where I’d want to place outlets on the outside, and from what I understand from reading online, you just (after turning off the electricity) take the outlet out on the inside, drill a hole to the outside, run the wiring, splice it in, mount the box? Sound about right? What size hole would you recommend? Any other thoughts would be welcome. Third location is in the attic, there’s a light fixture, basically a bulb hanging from a wire, but no outlets. I wouldn’t be running anything heavy duty up there, beside the light, maybe a fan, radio, and/or my son’s slot car track. I was thinking of mounting a junction box onto the wires to the light fixture and then running some surface mount boxes, one on each end of the attic. Any thoughts on this? I don’t want to end up on one of your “DIY costly mistakes” episodes, so any help and advice you could give would be greatly appreciated. Keep up the great work guys! We discuss Jame’s issue during the show. The one issue James didn’t mention is how much load is on the circuits he wants to extend. If there are not too many outlets on the circuits in question, he can extend the outlets inside the house to he porch as he suggests. A GFCI will be required outside. James could use a surface mount box or a recessed box. James - Determine if a licensed electrician is required to do the work in your and follow all local codes and permit processes. For the attic, same issue of not overloading the circuit applies. If you have enough juice, you can certainly add some outlets. However, without more detail about the space (finished or not finished?), it would be difficult for me to provide more explanation. You may need to run wires in conduit if it is exposed to contact/abuse. You may run it by a local electrician to make sure everything is up to snuff. If James can get a new circuit, wire, back to his new panel then it would be ideal. Same for the porch outlets. Adding a new circuit will ensure you are not overloading anything. Speaking of GFCIs. What do you do when retrofitting an older house and the boxes too shallow to fit a GFCI? Well, you could change the box to a bigger one. This can be a challenge when you are trying to avoid damage to plaster, tile or wallpaper. They sell box extenders at the home center. Those box extenders are designed for when you add tile. They are not meant to be seen. Handyguy Paul found an interesting solution. Extended wall plates. These plates gove you the extra room you need and have a finished look. You can get the in our Amazon Affiliate store. The Handyguys addressed some methods for adding a GFCI outlet where there is only a shallow electrical box. This post sponsored by http://www.erento.co.uk/ Whatever the magnitude or complexity of the project you wish to undertake, online tool hire will provide you necessary tools and equipment. Click these icons to share, thanks: The newest generation of synthetc decking looks much more like real wood and has a much longer warranty. Synthetic Decking Material and a Fiberon Warranty The Handyguys begin the show by talking about whats new in Synthetic decking. Composites versus PVC. While composite decking appear to be maintenance free, some manufactured decks become marred with mold, staining and deterioration. There are many newer synthetic decking materials that now have long warranties. One such synthetic decking material, with a 10 year warranty, is Fiberon. Making the decision to choose a synthetic deck versus a real wood deck can be daunting. What is your budget? What look do you want? Can you be careful about not staining the deck with a dropped hamburger or plate of buttered corn? Listener Question On New Electrical Outlets We answered a question from  James  regarding adding outlets to front and back porch and attic. James wrote us Hi guys, love the podcast. I’ve listened to every one so far. Quick question for you: We got our house last august, a 3 story, brick Victorian that will be 100 years old next year. It’s in surprisingly good shape, the home inspector thought so, and we agreed with him. Our only problem was the electrical system. They still had some active knob and tube wiring in the home and the insurance company refused to insure it until it was updated. The owners agreed to update it to a 100 amp service, we asked about upgrading it to 200 and we would split the difference, but the electrician wanted $2000 extra so we went with the 100 amp. Anyway to make a long story short (I know, TOO LATE!) There are 3 places where there’s little or no electricity. 2 of the places are on the front and back porches. There are outlets inside the house where I’d want to place outlets on the outside, and from what I understand from reading online, you just (after turning off the electricity) take the outlet out on the inside, drill a hole to the outside, run the wiring, splice it in, mount the box? Sound about right? What size hole would you recommend? Any other thoughts would be welcome. Third location is in the attic, there’s a light fixture, basically a bulb hanging from a wire, but no outlets. I wouldn’t be running anything heavy duty up there, beside the light, maybe a fan, radio, and/or my son’s slot car track. I was thinking of mounting a junction box onto the wires to the light fixture and then running some surface mount boxes, one on each end of the attic. Any thoughts on this? I don’t want to end up on one of your “DIY costly mistakes” episodes, so any help and advice you could give would be greatly appreciated. Keep up the great work guys! We discuss Jame’s issue during the show. The one issue James didn’t mention is how much load is on the circuits he wants to extend. If there are not too many outlets on the circuits in question, he can extend the outlets inside the house to he porch as he suggests. A GFCI will be required outside. James could use a surface mount box or a recessed box. James - Determine if a licensed electrician is required to do the work in your and follow all local codes and permit processes. For the attic, same issue of not overloading the circuit applies. If you have enough juice, you can certainly add some outlets. However, without more detail about the space (finished or not finished?), it would be difficult for me to provide more explanation. You may need to run wires in conduit if it is exposed to contact/abuse. You may run it by a local electrician to make sure everything is up to snuff. If James can get a new circuit, wire, back to his new panel then it would be ideal. Same for the porch outlets. Adding a new circuit will ensure you are not overloading anything. Speaking of GFCIs. What do you do when retrofitting an older house and the boxes too shallow to fit a GFCI? Well, you could change the box to a bigger one. This can be a challenge when you are trying to avoid damage to plaster, tile or wallpaper. They sell box extenders at the home center. Those box extenders are designed for when you add tile. They are not meant to be seen. Handyguy Paul found an interesting solution. Extended wall plates. These plates gove you the extra room you need and have a finished look. You can get the in our Amazon Affiliate store. The Handyguys addressed some methods for adding a GFCI outlet where there is only a shallow electrical box. This post sponsored by http://www.erento.co.uk/ Whatever the magnitude or complexity of the project you wish to undertake, online tool hire will provide you necessary tools and equipment. Click these icons to share, thanks: tag:odeo.com,2009-06-11,24692097 Thu, 11 Jun 2009 13:59:17 -0700 no Handyguys Podcast Ipe, Decks, Trex, Handyguys Podcast Category, GFCI, Synthetic decking, fiberon, shallow box, synthetic, real wood, deck warranty, composite deck, box extender, Composite Decking Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24834519-Episode-68-%E2%80%93-Synthetic-Decks-and-GFCI-Outlets The newest generation of synthetc decking looks much more like real wood and has a much longer warranty. Synthetic Decking Material and a Fiberon Warranty The Handyguys begin the show by talking about whats new in Synthetic decking. Composites versus PVC. While composite decking appear to be maintenance free, some manufactured decks become marred with mold, staining and deterioration. There are many newer synthetic decking materials that now have long warranties. One such synthetic decking material, with a 10 year warranty, is Fiberon. Making the decision to choose a synthetic deck versus a real wood deck can be daunting. What is your budget? What look do you want? Can you be careful about not staining the deck with a dropped hamburger or plate of buttered corn? Listener Question On New Electrical Outlets We answered a question from  James  regarding adding outlets to front and back porch and attic. James wrote us Hi guys, love the podcast. I’ve listened to every one so far. Q... The newest generation of synthetc decking looks much more like real wood and has a much longer warranty. Synthetic Decking Material and a Fiberon Warranty The Handyguys begin the show by talking about whats new in Synthetic decking. Composites versus PVC. While composite decking appear to be maintenance free, some manufactured decks become marred with mold, staining and deterioration. There are many newer synthetic decking materials that now have long warranties. One such synthetic decking material, with a 10 year warranty, is Fiberon. Making the decision to choose a synthetic deck versus a real wood deck can be daunting. What is your budget? What look do you want? Can you be careful about not staining the deck with a dropped hamburger or plate of buttered corn? Listener Question On New Electrical Outlets We answered a question from  James  regarding adding outlets to front and back porch and attic. James wrote us Hi guys, love the podcast. I’ve listened to every one so far. Quick question for you: We got our house last august, a 3 story, brick Victorian that will be 100 years old next year. It’s in surprisingly good shape, the home inspector thought so, and we agreed with him. Our only problem was the electrical system. They still had some active knob and tube wiring in the home and the insurance company refused to insure it until it was updated. The owners agreed to update it to a 100 amp service, we asked about upgrading it to 200 and we would split the difference, but the electrician wanted $2000 extra so we went with the 100 amp. Anyway to make a long story short (I know, TOO LATE!) There are 3 places where there’s little or no electricity. 2 of the places are on the front and back porches. There are outlets inside the house where I’d want to place outlets on the outside, and from what I understand from reading online, you just (after turning off the electricity) take the outlet out on the inside, drill a hole to the outside, run the wiring, splice it in, mount the box? Sound about right? What size hole would you recommend? Any other thoughts would be welcome. Third location is in the attic, there’s a light fixture, basically a bulb hanging from a wire, but no outlets. I wouldn’t be running anything heavy duty up there, beside the light, maybe a fan, radio, and/or my son’s slot car track. I was thinking of mounting a junction box onto the wires to the light fixture and then running some surface mount boxes, one on each end of the attic. Any thoughts on this? I don’t want to end up on one of your “DIY costly mistakes” episodes, so any help and advice you could give would be greatly appreciated. Keep up the great work guys! We discuss Jame’s issue during the show. The one issue James didn’t mention is how much load is on the circuits he wants to extend. If there are not too many outlets on the circuits in question, he can extend the outlets inside the house to he porch as he suggests. A GFCI will be required outside. James could use a surface mount box or a recessed box. James – Determine if a licensed electrician is required to do the work in your and follow all local codes and permit processes. For the attic, same issue of not overloading the circuit applies. If you have enough juice, you can certainly add some outlets. However, without more detail about the space (finished or not finished?), it would be difficult for me to provide more explanation. You may need to run wires in conduit if it is exposed to contact/abuse. You may run it by a local electrician to make sure everything is up to snuff. If James can get a new circuit, wire, back to his new panel then it would be ideal. Same for the porch outlets. Adding a new circuit will ensure you are not overloading anything. Speaking of GFCIs. What do you do when retrofitting an older house and the boxes too shallow to fit a GFCI? Well, you could change the box to a bigger one. This can be a challenge when you are trying to avoid damage to plaster, tile or wallpaper. They sell box extenders at the home center. Those box extenders are designed for when you add tile. They are not meant to be seen. Handyguy Paul found an interesting solution. Extended wall plates. These plates gove you the extra room you need and have a finished look. You can get the in our Amazon Affiliate store. The Handyguys addressed some methods for adding a GFCI outlet where there is only a shallow electrical box. This post sponsored by http://www.erento.co.uk/ Whatever the magnitude or complexity of the project you wish to undertake, online tool hire will provide you necessary tools and equipment. Click these icons to share, thanks: The newest generation of synthetc decking looks much more like real wood and has a much longer warranty. Synthetic Decking Material and a Fiberon Warranty The Handyguys begin the show by talking about whats new in Synthetic decking. Composites versus PVC. While composite decking appear to be maintenance free, some manufactured decks become marred with mold, staining and deterioration. There are many newer synthetic decking materials that now have long warranties. One such synthetic decking material, with a 10 year warranty, is Fiberon. Making the decision to choose a synthetic deck versus a real wood deck can be daunting. What is your budget? What look do you want? Can you be careful about not staining the deck with a dropped hamburger or plate of buttered corn? Listener Question On New Electrical Outlets We answered a question from  James  regarding adding outlets to front and back porch and attic. James wrote us Hi guys, love the podcast. I’ve listened to every one so far. Quick question for you: We got our house last august, a 3 story, brick Victorian that will be 100 years old next year. It’s in surprisingly good shape, the home inspector thought so, and we agreed with him. Our only problem was the electrical system. They still had some active knob and tube wiring in the home and the insurance company refused to insure it until it was updated. The owners agreed to update it to a 100 amp service, we asked about upgrading it to 200 and we would split the difference, but the electrician wanted $2000 extra so we went with the 100 amp. Anyway to make a long story short (I know, TOO LATE!) There are 3 places where there’s little or no electricity. 2 of the places are on the front and back porches. There are outlets inside the house where I’d want to place outlets on the outside, and from what I understand from reading online, you just (after turning off the electricity) take the outlet out on the inside, drill a hole to the outside, run the wiring, splice it in, mount the box? Sound about right? What size hole would you recommend? Any other thoughts would be welcome. Third location is in the attic, there’s a light fixture, basically a bulb hanging from a wire, but no outlets. I wouldn’t be running anything heavy duty up there, beside the light, maybe a fan, radio, and/or my son’s slot car track. I was thinking of mounting a junction box onto the wires to the light fixture and then running some surface mount boxes, one on each end of the attic. Any thoughts on this? I don’t want to end up on one of your “DIY costly mistakes” episodes, so any help and advice you could give would be greatly appreciated. Keep up the great work guys! We discuss Jame’s issue during the show. The one issue James didn’t mention is how much load is on the circuits he wants to extend. If there are not too many outlets on the circuits in question, he can extend the outlets inside the house to he porch as he suggests. A GFCI will be required outside. James could use a surface mount box or a recessed box. James – Determine if a licensed electrician is required to do the work in your and follow all local codes and permit processes. For the attic, same issue of not overloading the circuit applies. If you have enough juice, you can certainly add some outlets. However, without more detail about the space (finished or not finished?), it would be difficult for me to provide more explanation. You may need to run wires in conduit if it is exposed to contact/abuse. You may run it by a local electrician to make sure everything is up to snuff. If James can get a new circuit, wire, back to his new panel then it would be ideal. Same for the porch outlets. Adding a new circuit will ensure you are not overloading anything. Speaking of GFCIs. What do you do when retrofitting an older house and the boxes too shallow to fit a GFCI? Well, you could change the box to a bigger one. This can be a challenge when you are trying to avoid damage to plaster, tile or wallpaper. They sell box extenders at the home center. Those box extenders are designed for when you add tile. They are not meant to be seen. Handyguy Paul found an interesting solution. Extended wall plates. These plates gove you the extra room you need and have a finished look. You can get the in our Amazon Affiliate store. The Handyguys addressed some methods for adding a GFCI outlet where there is only a shallow electrical box. This post sponsored by http://www.erento.co.uk/ Whatever the magnitude or complexity of the project you wish to undertake, online tool hire will provide you necessary tools and equipment. Click these icons to share, thanks: tag:odeo.com,2009-06-11,24834519 Thu, 11 Jun 2009 13:59:17 -0700 no Handyguys Podcast Ipe, Decks, Trex, Handyguys Podcast Category, GFCI, Synthetic decking, fiberon, shallow box, synthetic, real wood, deck warranty, composite deck, box extender, Composite Decking Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24653169-Episode-67-Fein-Fathers-Day-and-Smart-Grid The Handyguys start out discussing some tools for Fathers Day. Instead of doing a gift guide we decided to ask our twitter followers ( follow @handyguys ) what they would like us to discuss as a great fathers day gift for a handyguy. One follower said that her husband was eying up the Fein Multimaster 250Q in our store so we decided to devote a segment to this handy tool. The Multimaster is one of those multipurpose tools that can make you ponder how useful it will be for regular handyguy tasks. Unlike other “space-aged tools” advertised on late night infomercials, this tool is actually a quality product. The multimaster, made in Germany, is extremely well built and solid.  Handyguy Brian used it for his kitchen project to undercut door jambs, plunge cut drywall for electrical boxes, detail sand trim, remove thinset, scrape paint and cut nails.  Believe us, it is a useful tool! The Fein Multimaster may not be for everyone, its a little expensive at first glance (thankful... The Handyguys start out discussing some tools for Fathers Day. Instead of doing a gift guide we decided to ask our twitter followers ( follow @handyguys ) what they would like us to discuss as a great fathers day gift for a handyguy. One follower said that her husband was eying up the Fein Multimaster 250Q in our store so we decided to devote a segment to this handy tool. The Multimaster is one of those multipurpose tools that can make you ponder how useful it will be for regular handyguy tasks. Unlike other “space-aged tools” advertised on late night infomercials, this tool is actually a quality product. The multimaster, made in Germany, is extremely well built and solid.  Handyguy Brian used it for his kitchen project to undercut door jambs, plunge cut drywall for electrical boxes, detail sand trim, remove thinset, scrape paint and cut nails.  Believe us, it is a useful tool! The Fein Multimaster may not be for everyone, its a little expensive at first glance (thankfully Brian’s Dad purchased one for the kitchen work!). Once you find the many uses for it you wont know how you ever did projects without one. The Handyguys recommend that you get the “Top” kit. The Top kit comes with a nice case to hold all the accessories and a bunch of blades to keep you in business for lots of projects. If you bought all those blades and case separately you would ultimately spend more money them getting them all up front. The case alone makes this kit worth it. My only gripe is that Fein used to provide a steel case and current case is plastic. It appears sturdy and I am sure it will withstand most abuse, still, I would have preferred the steel case. Below is a chart that compares what is in each set. Purchases made through our Amazon Affiliate store will help keep The Handyguys Podcast on the air. The links in the table below go to the details in our store. Take the plunge, get one for someone special for Fathers Day. Compare Fein MultiMaster Sets FMM 250 Start FMM 250Q Select FMM 250Q Top MULTIMASTER UNIT MultiMaster FMM250 MultiMaster FMM250Q (w/ QuickIN system) ACCESSORIES Accessories with checks are included in respective sets; most accessories can be purchased separately (click on accessory) Universal 29mm E-CUT saw blade 5 each: sanding sheets (60, 80, 120, 180) 5 each: perforated sanding sheets (60, 80, 120, 180) Rigid scraper blade Key and mounting bolts Sanding pad Perforated sanding pad Carbide-tip segment saw blade HSS segment saw blade sanding set Dust extraction device Carbide rasp (triangular) Carrying case The Smart Power Grid Once the Handyguys got over discussing the Multimaster we discussed an article in Computerworld magazine about Smart Grid technology. What is a smart grid? The general idea is that your electric meter can act as a gateway for bi-directional data transfer to and from the power company. Your power consuming devices will, in the future be able to communicate to the power company via the meter gateway. What advantages does this have? How about variable electric rates depending on the efficency of a device? How about if the power company sent you details on how much your AC cost to run that hot August day? How about real-time monitoring of usage? The smart grid will be years away if it ever happens. For now, consider the Power Cost Monitor from Blue Line. We discuses the Power Cost Monitor in Episode 42 of The Handyguys Podcast. This post was sponsored by The Handyguys Podcast Amazon Affiliate Store. and Erento - Whatever the magnitude or complexity of the project you wish to undertake, online tool hire will provide you necessary tools and equipment. Click these icons to share, thanks: The Handyguys start out discussing some tools for Fathers Day. Instead of doing a gift guide we decided to ask our twitter followers ( follow @handyguys ) what they would like us to discuss as a great fathers day gift for a handyguy. One follower said that her husband was eying up the Fein Multimaster 250Q in our store so we decided to devote a segment to this handy tool. The Multimaster is one of those multipurpose tools that can make you ponder how useful it will be for regular handyguy tasks. Unlike other “space-aged tools” advertised on late night infomercials, this tool is actually a quality product. The multimaster, made in Germany, is extremely well built and solid.  Handyguy Brian used it for his kitchen project to undercut door jambs, plunge cut drywall for electrical boxes, detail sand trim, remove thinset, scrape paint and cut nails.  Believe us, it is a useful tool! The Fein Multimaster may not be for everyone, its a little expensive at first glance (thankfully Brian’s Dad purchased one for the kitchen work!). Once you find the many uses for it you wont know how you ever did projects without one. The Handyguys recommend that you get the “Top” kit. The Top kit comes with a nice case to hold all the accessories and a bunch of blades to keep you in business for lots of projects. If you bought all those blades and case separately you would ultimately spend more money them getting them all up front. The case alone makes this kit worth it. My only gripe is that Fein used to provide a steel case and current case is plastic. It appears sturdy and I am sure it will withstand most abuse, still, I would have preferred the steel case. Below is a chart that compares what is in each set. Purchases made through our Amazon Affiliate store will help keep The Handyguys Podcast on the air. The links in the table below go to the details in our store. Take the plunge, get one for someone special for Fathers Day. Compare Fein MultiMaster Sets FMM 250 Start FMM 250Q Select FMM 250Q Top MULTIMASTER UNIT MultiMaster FMM250 MultiMaster FMM250Q (w/ QuickIN system) ACCESSORIES Accessories with checks are included in respective sets; most accessories can be purchased separately (click on accessory) Universal 29mm E-CUT saw blade 5 each: sanding sheets (60, 80, 120, 180) 5 each: perforated sanding sheets (60, 80, 120, 180) Rigid scraper blade Key and mounting bolts Sanding pad Perforated sanding pad Carbide-tip segment saw blade HSS segment saw blade sanding set Dust extraction device Carbide rasp (triangular) Carrying case The Smart Power Grid Once the Handyguys got over discussing the Multimaster we discussed an article in Computerworld magazine about Smart Grid technology. What is a smart grid? The general idea is that your electric meter can act as a gateway for bi-directional data transfer to and from the power company. Your power consuming devices will, in the future be able to communicate to the power company via the meter gateway. What advantages does this have? How about variable electric rates depending on the efficency of a device? How about if the power company sent you details on how much your AC cost to run that hot August day? How about real-time monitoring of usage? The smart grid will be years away if it ever happens. For now, consider the Power Cost Monitor from Blue Line. We discuses the Power Cost Monitor in Episode 42 of The Handyguys Podcast. This post was sponsored by The Handyguys Podcast Amazon Affiliate Store. and Erento - Whatever the magnitude or complexity of the project you wish to undertake, online tool hire will provide you necessary tools and equipment. Click these icons to share, thanks: tag:odeo.com,2009-06-04,24653169 Thu, 04 Jun 2009 13:59:29 -0700 no Handyguys Podcast podcast, DIY, home improvement, top, fathers day, start, sanders, computerworld, 250, Handyguys Podcast Category, Smart Grid, Scraper, Made in Germany, Energy Savings, Power Consumption, select, power monitor, jamb saw, power grid, electric meter, Multimaster, FMM250, detail sander, FMM, Plunge cut, segment saw, Fein, Fein Multimaster, sanderscraper, e-cut, 250Q, FMM250Q Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24834520-Episode-67-%E2%80%93-Fein-Fathers-Day-and-Smart-Grid The Handyguys start out discussing some tools for Fathers Day. Instead of doing a gift guide we decided to ask our twitter followers ( follow @handyguys ) what they would like us to discuss as a great fathers day gift for a handyguy. One follower said that her husband was eying up the Fein Multimaster 250Q in our store so we decided to devote a segment to this handy tool. The Multimaster is one of those multipurpose tools that can make you ponder how useful it will be for regular handyguy tasks. Unlike other “space-aged tools” advertised on late night infomercials, this tool is actually a quality product. The multimaster, made in Germany, is extremely well built and solid.  Handyguy Brian used it for his kitchen project to undercut door jambs, plunge cut drywall for electrical boxes, detail sand trim, remove thinset, scrape paint and cut nails.  Believe us, it is a useful tool! The Fein Multimaster may not be for everyone, its a little expensive at first glance (thankful... The Handyguys start out discussing some tools for Fathers Day. Instead of doing a gift guide we decided to ask our twitter followers ( follow @handyguys ) what they would like us to discuss as a great fathers day gift for a handyguy. One follower said that her husband was eying up the Fein Multimaster 250Q in our store so we decided to devote a segment to this handy tool. The Multimaster is one of those multipurpose tools that can make you ponder how useful it will be for regular handyguy tasks. Unlike other “space-aged tools” advertised on late night infomercials, this tool is actually a quality product. The multimaster, made in Germany, is extremely well built and solid.  Handyguy Brian used it for his kitchen project to undercut door jambs, plunge cut drywall for electrical boxes, detail sand trim, remove thinset, scrape paint and cut nails.  Believe us, it is a useful tool! The Fein Multimaster may not be for everyone, its a little expensive at first glance (thankfully Brian’s Dad purchased one for the kitchen work!). Once you find the many uses for it you wont know how you ever did projects without one. The Handyguys recommend that you get the “Top” kit. The Top kit comes with a nice case to hold all the accessories and a bunch of blades to keep you in business for lots of projects. If you bought all those blades and case separately you would ultimately spend more money them getting them all up front. The case alone makes this kit worth it. My only gripe is that Fein used to provide a steel case and current case is plastic. It appears sturdy and I am sure it will withstand most abuse, still, I would have preferred the steel case. Below is a chart that compares what is in each set. Purchases made through our Amazon Affiliate store will help keep The Handyguys Podcast on the air. The links in the table below go to the details in our store. Take the plunge, get one for someone special for Fathers Day. Compare Fein MultiMaster Sets FMM 250 Start FMM 250Q Select FMM 250Q Top MULTIMASTER UNIT MultiMaster FMM250 MultiMaster FMM250Q (w/ QuickIN system) ACCESSORIES Accessories with checks are included in respective sets; most accessories can be purchased separately (click on accessory) Universal 29mm E-CUT saw blade 5 each: sanding sheets (60, 80, 120, 180) 5 each: perforated sanding sheets (60, 80, 120, 180) Rigid scraper blade Key and mounting bolts Sanding pad Perforated sanding pad Carbide-tip segment saw blade HSS segment saw blade sanding set Dust extraction device Carbide rasp (triangular) Carrying case The Smart Power Grid Once the Handyguys got over discussing the Multimaster, we discussed an article in Computerworld magazine about Smart Grid technology. What is a smart grid? The general idea is that your electric meter can act as a gateway for bi-directional data transfer to and from the power company.  What advantages does this have? How about variable electric rates depending on the efficency of a device? How about if the power company sent you details on how much your AC cost to run that hot August day? How about real-time monitoring of usage? The smart grid will be years away if it ever happens. For now, consider the Power Cost Monitor from Blue Line. We discuses the Power Cost Monitor in Episode 42 of The Handyguys Podcast. This post was sponsored by The Handyguys Podcast Amazon Affiliate Store. and Erento – Whatever the magnitude or complexity of the project you wish to undertake, online tool hire will provide you necessary tools and equipment. Click these icons to share, thanks: The Handyguys start out discussing some tools for Fathers Day. Instead of doing a gift guide we decided to ask our twitter followers ( follow @handyguys ) what they would like us to discuss as a great fathers day gift for a handyguy. One follower said that her husband was eying up the Fein Multimaster 250Q in our store so we decided to devote a segment to this handy tool. The Multimaster is one of those multipurpose tools that can make you ponder how useful it will be for regular handyguy tasks. Unlike other “space-aged tools” advertised on late night infomercials, this tool is actually a quality product. The multimaster, made in Germany, is extremely well built and solid.  Handyguy Brian used it for his kitchen project to undercut door jambs, plunge cut drywall for electrical boxes, detail sand trim, remove thinset, scrape paint and cut nails.  Believe us, it is a useful tool! The Fein Multimaster may not be for everyone, its a little expensive at first glance (thankfully Brian’s Dad purchased one for the kitchen work!). Once you find the many uses for it you wont know how you ever did projects without one. The Handyguys recommend that you get the “Top” kit. The Top kit comes with a nice case to hold all the accessories and a bunch of blades to keep you in business for lots of projects. If you bought all those blades and case separately you would ultimately spend more money them getting them all up front. The case alone makes this kit worth it. My only gripe is that Fein used to provide a steel case and current case is plastic. It appears sturdy and I am sure it will withstand most abuse, still, I would have preferred the steel case. Below is a chart that compares what is in each set. Purchases made through our Amazon Affiliate store will help keep The Handyguys Podcast on the air. The links in the table below go to the details in our store. Take the plunge, get one for someone special for Fathers Day. Compare Fein MultiMaster Sets FMM 250 Start FMM 250Q Select FMM 250Q Top MULTIMASTER UNIT MultiMaster FMM250 MultiMaster FMM250Q (w/ QuickIN system) ACCESSORIES Accessories with checks are included in respective sets; most accessories can be purchased separately (click on accessory) Universal 29mm E-CUT saw blade 5 each: sanding sheets (60, 80, 120, 180) 5 each: perforated sanding sheets (60, 80, 120, 180) Rigid scraper blade Key and mounting bolts Sanding pad Perforated sanding pad Carbide-tip segment saw blade HSS segment saw blade sanding set Dust extraction device Carbide rasp (triangular) Carrying case The Smart Power Grid Once the Handyguys got over discussing the Multimaster, we discussed an article in Computerworld magazine about Smart Grid technology. What is a smart grid? The general idea is that your electric meter can act as a gateway for bi-directional data transfer to and from the power company.  What advantages does this have? How about variable electric rates depending on the efficency of a device? How about if the power company sent you details on how much your AC cost to run that hot August day? How about real-time monitoring of usage? The smart grid will be years away if it ever happens. For now, consider the Power Cost Monitor from Blue Line. We discuses the Power Cost Monitor in Episode 42 of The Handyguys Podcast. This post was sponsored by The Handyguys Podcast Amazon Affiliate Store. and Erento – Whatever the magnitude or complexity of the project you wish to undertake, online tool hire will provide you necessary tools and equipment. Click these icons to share, thanks: tag:odeo.com,2009-06-04,24834520 Thu, 04 Jun 2009 13:59:29 -0700 no Handyguys Podcast podcast, DIY, home improvement, top, fathers day, start, sanders, computerworld, 250, Handyguys Podcast Category, Smart Grid, Scraper, Made in Germany, Energy Savings, Power Consumption, select, power monitor, jamb saw, Fien Multimaster, power grid, electric meter, Multimaster, FMM250, detail sander, FMM, Plunge cut, segment saw, Fein, Fein Multimaster, sanderscraper, e-cut, 250Q, FMM250Q Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24627380-Episode-66-Occupancy-Inspection-and-Green-Lawn-Tools The Handyguys begin their show discussing some new green lawn tools. Their conversation was prompted by an article in the Wall Street Journal regarding some new “green” lawn tools written by Gwendolyn (Wendy) Bounds. She even tested out a new battery operated riding mower. Her video is a must view if you are considering one of these. Certificate of Use Requirements The Handyguys then discuss the topic of “Certificate of Use”. What’s that? In many townships across the country they are requiring certain safety items to be present in a home before a sale can proceed. Sometimes the upgrades can be difficult, expensive or just a pain. The Handyguys discuss many of the common elements in a Certificate of Use inspection. This inspection is not to be confused with a code inspection that may be required during a major remodel. Below is some language from a typical requirements document from a local township. Minimum Life Safety Requirements Ground Fault Circuit ... The Handyguys begin their show discussing some new green lawn tools. Their conversation was prompted by an article in the Wall Street Journal regarding some new “green” lawn tools written by Gwendolyn (Wendy) Bounds. She even tested out a new battery operated riding mower. Her video is a must view if you are considering one of these. Certificate of Use Requirements The Handyguys then discuss the topic of “Certificate of Use”. What’s that? In many townships across the country they are requiring certain safety items to be present in a home before a sale can proceed. Sometimes the upgrades can be difficult, expensive or just a pain. The Handyguys discuss many of the common elements in a Certificate of Use inspection. This inspection is not to be confused with a code inspection that may be required during a major remodel. Below is some language from a typical requirements document from a local township. Minimum Life Safety Requirements Ground Fault Circuit Interrupter (G.F.C.I’s) receptacles are required for receptacles located in bathrooms, powder rooms, garages, outside receptacles, vicinity of pools, saunas etc. and in kitchens where the receptacles are within six (6) feet of the waters edge of the sink. A receptacle with a single yolk that is dedicated for an appliance need not have a GFCI installed. Smoke detectors are to be installed, in working order, in each bedroom, in the vicinity of the bedrooms and each floor of the dwelling including basements. In a split-level dwelling without an intervening door between adjacent levels, smoke detectors are required in the vicinity of the bedrooms and the lower level that is one story below the upper level. If an intervening door exists between adjacent levels, a smoke detector shall be installed on each level. At least one operable carbon monoxide detector shall be installed in the hallway in the vicinity of the bedroom area of the dwelling. For dwellings equipped with a fire suppression or sprinkler system, the applicant shall provide documentation that the system has been inspected and certified within the past 12 months by a certified inspection agency. Sidewalks, driveway aprons and curbs must be in good condition. Out of level, fragmented or otherwise deteriorated sidewalks, driveway aprons and curbs must be removed and replaced. Patching shall not be permitted. House numbers must be affixed on the outside of the dwelling so that they are visible from the street. The house numbers must be three and one half (3 ½) inches in height. Sanitary Sewer Infiltration Prevention Sump pumps and floor drains are to be discharged to the exterior of the dwelling. Sump pumps and floor drains connected to the sanitary sewer are illegal and must be corrected. Roof drains and yard drains shall not be connected to the sanitary sewer. The sewer lateral curb trap vent pipe must be six (6) inches above grade and have a secure vent cap or box. If the curb trap vent pipe is not exposed, the vent pipe must be located, raised and installed with a Philadelphia Regulation vent box. In the event that t curb trap vent cannot be located, the applicant shall obtain a registered plumber to provide documentation that the curb trap vent could not be located. Whatever the magnitude or complexity of the project you wish to undertake, online tool hire will provide you necessary tools and equipment. This segment of The Handyguys Podcast was sponsored by http://www.erento.co.uk. Thanks http://www.erento.co.uk Click these icons to share, thanks: The Handyguys begin their show discussing some new green lawn tools. Their conversation was prompted by an article in the Wall Street Journal regarding some new “green” lawn tools written by Gwendolyn (Wendy) Bounds. She even tested out a new battery operated riding mower. Her video is a must view if you are considering one of these. Certificate of Use Requirements The Handyguys then discuss the topic of “Certificate of Use”. What’s that? In many townships across the country they are requiring certain safety items to be present in a home before a sale can proceed. Sometimes the upgrades can be difficult, expensive or just a pain. The Handyguys discuss many of the common elements in a Certificate of Use inspection. This inspection is not to be confused with a code inspection that may be required during a major remodel. Below is some language from a typical requirements document from a local township. Minimum Life Safety Requirements Ground Fault Circuit Interrupter (G.F.C.I’s) receptacles are required for receptacles located in bathrooms, powder rooms, garages, outside receptacles, vicinity of pools, saunas etc. and in kitchens where the receptacles are within six (6) feet of the waters edge of the sink. A receptacle with a single yolk that is dedicated for an appliance need not have a GFCI installed. Smoke detectors are to be installed, in working order, in each bedroom, in the vicinity of the bedrooms and each floor of the dwelling including basements. In a split-level dwelling without an intervening door between adjacent levels, smoke detectors are required in the vicinity of the bedrooms and the lower level that is one story below the upper level. If an intervening door exists between adjacent levels, a smoke detector shall be installed on each level. At least one operable carbon monoxide detector shall be installed in the hallway in the vicinity of the bedroom area of the dwelling. For dwellings equipped with a fire suppression or sprinkler system, the applicant shall provide documentation that the system has been inspected and certified within the past 12 months by a certified inspection agency. Sidewalks, driveway aprons and curbs must be in good condition. Out of level, fragmented or otherwise deteriorated sidewalks, driveway aprons and curbs must be removed and replaced. Patching shall not be permitted. House numbers must be affixed on the outside of the dwelling so that they are visible from the street. The house numbers must be three and one half (3 ½) inches in height. Sanitary Sewer Infiltration Prevention Sump pumps and floor drains are to be discharged to the exterior of the dwelling. Sump pumps and floor drains connected to the sanitary sewer are illegal and must be corrected. Roof drains and yard drains shall not be connected to the sanitary sewer. The sewer lateral curb trap vent pipe must be six (6) inches above grade and have a secure vent cap or box. If the curb trap vent pipe is not exposed, the vent pipe must be located, raised and installed with a Philadelphia Regulation vent box. In the event that t curb trap vent cannot be located, the applicant shall obtain a registered plumber to provide documentation that the curb trap vent could not be located. Whatever the magnitude or complexity of the project you wish to undertake, online tool hire will provide you necessary tools and equipment. This segment of The Handyguys Podcast was sponsored by http://www.erento.co.uk. Thanks http://www.erento.co.uk Click these icons to share, thanks: tag:odeo.com,2009-05-29,24627380 Fri, 29 May 2009 13:01:02 -0700 no Handyguys Podcast safety, green, sheep, battery mower, reel mower, green mower, codes, mowing, mowers, Handyguys Podcast Category, GFCI, smoke detector, sump pump, downspouts, curb trap, sprinkler systems, certificate of use, carbon monoxide, home sale, roof drains, house numbers, battery mowers, battery riding mower, airens, cracked concrete, GFI, inspection, sewer lateral, fire suppression Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24834521-Episode-66-%E2%80%93-Occupancy-Inspection-and-Green-Lawn-Tools The Handyguys begin their show discussing some new green lawn tools. Their conversation was prompted by an article in the Wall Street Journal regarding some new “green” lawn tools written by Gwendolyn (Wendy) Bounds. She even tested out a new battery operated riding mower. Her video is a must view if you are considering one of these. Certificate of Use Requirements The Handyguys then discuss the topic of “Certificate of Use”. What’s that? In many townships across the country they are requiring certain safety items to be present in a home before a sale can proceed. Sometimes the upgrades can be difficult, expensive or just a pain. The Handyguys discuss many of the common elements in a Certificate of Use inspection. This inspection is not to be confused with a code inspection that may be required during a major remodel. Below is some language from a typical requirements document from a local township. Minimum Life Safety Requirements Ground Fault Circuit ... The Handyguys begin their show discussing some new green lawn tools. Their conversation was prompted by an article in the Wall Street Journal regarding some new “green” lawn tools written by Gwendolyn (Wendy) Bounds. She even tested out a new battery operated riding mower. Her video is a must view if you are considering one of these. Certificate of Use Requirements The Handyguys then discuss the topic of “Certificate of Use”. What’s that? In many townships across the country they are requiring certain safety items to be present in a home before a sale can proceed. Sometimes the upgrades can be difficult, expensive or just a pain. The Handyguys discuss many of the common elements in a Certificate of Use inspection. This inspection is not to be confused with a code inspection that may be required during a major remodel. Below is some language from a typical requirements document from a local township. Minimum Life Safety Requirements Ground Fault Circuit Interrupter (G.F.C.I’s) receptacles are required for receptacles located in bathrooms, powder rooms, garages, outside receptacles, vicinity of pools, saunas etc. and in kitchens where the receptacles are within six (6) feet of the waters edge of the sink. A receptacle with a single yolk that is dedicated for an appliance need not have a GFCI installed. Smoke detectors are to be installed, in working order, in each bedroom, in the vicinity of the bedrooms and each floor of the dwelling including basements. In a split-level dwelling without an intervening door between adjacent levels, smoke detectors are required in the vicinity of the bedrooms and the lower level that is one story below the upper level. If an intervening door exists between adjacent levels, a smoke detector shall be installed on each level. At least one operable carbon monoxide detector shall be installed in the hallway in the vicinity of the bedroom area of the dwelling. For dwellings equipped with a fire suppression or sprinkler system, the applicant shall provide documentation that the system has been inspected and certified within the past 12 months by a certified inspection agency. Sidewalks, driveway aprons and curbs must be in good condition. Out of level, fragmented or otherwise deteriorated sidewalks, driveway aprons and curbs must be removed and replaced. Patching shall not be permitted. House numbers must be affixed on the outside of the dwelling so that they are visible from the street. The house numbers must be three and one half (3 ½) inches in height. Sanitary Sewer Infiltration Prevention Sump pumps and floor drains are to be discharged to the exterior of the dwelling. Sump pumps and floor drains connected to the sanitary sewer are illegal and must be corrected. Roof drains and yard drains shall not be connected to the sanitary sewer. The sewer lateral curb trap vent pipe must be six (6) inches above grade and have a secure vent cap or box. If the curb trap vent pipe is not exposed, the vent pipe must be located, raised and installed with a Philadelphia Regulation vent box. In the event that t curb trap vent cannot be located, the applicant shall obtain a registered plumber to provide documentation that the curb trap vent could not be located. Whatever the magnitude or complexity of the project you wish to undertake, online tool hire will provide you necessary tools and equipment. This segment of The Handyguys Podcast was sponsored by http://www.erento.co.uk. Thanks http://www.erento.co.uk Click these icons to share, thanks: The Handyguys begin their show discussing some new green lawn tools. Their conversation was prompted by an article in the Wall Street Journal regarding some new “green” lawn tools written by Gwendolyn (Wendy) Bounds. She even tested out a new battery operated riding mower. Her video is a must view if you are considering one of these. Certificate of Use Requirements The Handyguys then discuss the topic of “Certificate of Use”. What’s that? In many townships across the country they are requiring certain safety items to be present in a home before a sale can proceed. Sometimes the upgrades can be difficult, expensive or just a pain. The Handyguys discuss many of the common elements in a Certificate of Use inspection. This inspection is not to be confused with a code inspection that may be required during a major remodel. Below is some language from a typical requirements document from a local township. Minimum Life Safety Requirements Ground Fault Circuit Interrupter (G.F.C.I’s) receptacles are required for receptacles located in bathrooms, powder rooms, garages, outside receptacles, vicinity of pools, saunas etc. and in kitchens where the receptacles are within six (6) feet of the waters edge of the sink. A receptacle with a single yolk that is dedicated for an appliance need not have a GFCI installed. Smoke detectors are to be installed, in working order, in each bedroom, in the vicinity of the bedrooms and each floor of the dwelling including basements. In a split-level dwelling without an intervening door between adjacent levels, smoke detectors are required in the vicinity of the bedrooms and the lower level that is one story below the upper level. If an intervening door exists between adjacent levels, a smoke detector shall be installed on each level. At least one operable carbon monoxide detector shall be installed in the hallway in the vicinity of the bedroom area of the dwelling. For dwellings equipped with a fire suppression or sprinkler system, the applicant shall provide documentation that the system has been inspected and certified within the past 12 months by a certified inspection agency. Sidewalks, driveway aprons and curbs must be in good condition. Out of level, fragmented or otherwise deteriorated sidewalks, driveway aprons and curbs must be removed and replaced. Patching shall not be permitted. House numbers must be affixed on the outside of the dwelling so that they are visible from the street. The house numbers must be three and one half (3 ½) inches in height. Sanitary Sewer Infiltration Prevention Sump pumps and floor drains are to be discharged to the exterior of the dwelling. Sump pumps and floor drains connected to the sanitary sewer are illegal and must be corrected. Roof drains and yard drains shall not be connected to the sanitary sewer. The sewer lateral curb trap vent pipe must be six (6) inches above grade and have a secure vent cap or box. If the curb trap vent pipe is not exposed, the vent pipe must be located, raised and installed with a Philadelphia Regulation vent box. In the event that t curb trap vent cannot be located, the applicant shall obtain a registered plumber to provide documentation that the curb trap vent could not be located. Whatever the magnitude or complexity of the project you wish to undertake, online tool hire will provide you necessary tools and equipment. This segment of The Handyguys Podcast was sponsored by http://www.erento.co.uk. Thanks http://www.erento.co.uk Click these icons to share, thanks: tag:odeo.com,2009-05-29,24834521 Fri, 29 May 2009 13:01:02 -0700 no Handyguys Podcast safety, green, sheep, battery mower, reel mower, green mower, codes, mowing, mowers, Handyguys Podcast Category, GFCI, smoke detector, sump pump, downspouts, curb trap, sprinkler systems, certificate of use, carbon monoxide, home sale, roof drains, house numbers, battery mowers, battery riding mower, airens, cracked concrete, GFI, inspection, sewer lateral, fire suppression Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24834522-Episode-65-%E2%80%93-A-Handyguys-Kitchen A finished kitchen remodel done by Brian. The Handyguys Brian & Paul discuss a DIY kitchen remodel. Some of the topics discussed in this podcast: Planning Skills Tools Timeline Budget When to bring in a professional Listen to the podcast for details and enjoy the before and after pictures. The first three are before pictures. The rest are after. Click on any image for a full size view. Before Kitchen The wall again from inside the kitchen. This wall between the dining room and the kitchen needs to go The Santos Mahogany prefinished hardwood floor is an awesome change from the dingy vinyl floor. The refrigerator, stove and sink did not move location. The original dishwasher was a portable unit and was replaced with an undercounter unit. This made room for a pantry to the right of the refrigerator. The built in microwave helps save counter space with little loss of cabinet space. The new kitchen sports a built in dishwasher, gas/convection stove, granite and a tile backsplash. Wit... A finished kitchen remodel done by Brian. The Handyguys Brian & Paul discuss a DIY kitchen remodel. Some of the topics discussed in this podcast: Planning Skills Tools Timeline Budget When to bring in a professional Listen to the podcast for details and enjoy the before and after pictures. The first three are before pictures. The rest are after. Click on any image for a full size view. Before Kitchen The wall again from inside the kitchen. This wall between the dining room and the kitchen needs to go The Santos Mahogany prefinished hardwood floor is an awesome change from the dingy vinyl floor. The refrigerator, stove and sink did not move location. The original dishwasher was a portable unit and was replaced with an undercounter unit. This made room for a pantry to the right of the refrigerator. The built in microwave helps save counter space with little loss of cabinet space. The new kitchen sports a built in dishwasher, gas/convection stove, granite and a tile backsplash. Without the wall we were abble to add some base cabinets for much needed storage and a countertop to acomodate a few stools. By removing the wall the space is opened up and more functional Click these icons to share, thanks: A finished kitchen remodel done by Brian. The Handyguys Brian & Paul discuss a DIY kitchen remodel. Some of the topics discussed in this podcast: Planning Skills Tools Timeline Budget When to bring in a professional Listen to the podcast for details and enjoy the before and after pictures. The first three are before pictures. The rest are after. Click on any image for a full size view. Before Kitchen The wall again from inside the kitchen. This wall between the dining room and the kitchen needs to go The Santos Mahogany prefinished hardwood floor is an awesome change from the dingy vinyl floor. The refrigerator, stove and sink did not move location. The original dishwasher was a portable unit and was replaced with an undercounter unit. This made room for a pantry to the right of the refrigerator. The built in microwave helps save counter space with little loss of cabinet space. The new kitchen sports a built in dishwasher, gas/convection stove, granite and a tile backsplash. Without the wall we were abble to add some base cabinets for much needed storage and a countertop to acomodate a few stools. By removing the wall the space is opened up and more functional Click these icons to share, thanks: tag:odeo.com,2009-05-21,24834522 Thu, 21 May 2009 13:59:34 -0700 no Handyguys Podcast podcast, DIY, home improvement, kitchen, planning, lighting, ideas, renovation, electrical, Handyguys Podcast Category, Flooring, granite, tile, kitchen ideas, pendant light, cabinets, kitchen remodel, pendent, remodel, countertops Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24592382-Episode-65-A-Handyguys-Kitchen A finished kitchen remodel done by Brian. The Handyguys Brian & Paul discuss a DIY kitchen remodel. Some of the topics discussed in this podcast: Planning Skills Tools Timeline Budget When to bring in a professional Listen to the podcast for details and enjoy the before and after pictures. The first three are before pictures. The rest are after. Click on any image for a full size view. Before Kitchen Kitchen Before Kitchen before The Santos Mahogany prefinished hardwood floor is an awesome change from the dingy vinyl floor. The refrigerator, stove and sink did not move location. The original dishwasher was a portable unit and was replaced with an undercounter unit. This made room for a pantry to the right of the refrigerator. The built in microwave helps save counter space with little loss of cabinet space. Kitchen after Kitchen After After Kitchen Click these icons to share, thanks: A finished kitchen remodel done by Brian. The Handyguys Brian & Paul discuss a DIY kitchen remodel. Some of the topics discussed in this podcast: Planning Skills Tools Timeline Budget When to bring in a professional Listen to the podcast for details and enjoy the before and after pictures. The first three are before pictures. The rest are after. Click on any image for a full size view. Before Kitchen Kitchen Before Kitchen before The Santos Mahogany prefinished hardwood floor is an awesome change from the dingy vinyl floor. The refrigerator, stove and sink did not move location. The original dishwasher was a portable unit and was replaced with an undercounter unit. This made room for a pantry to the right of the refrigerator. The built in microwave helps save counter space with little loss of cabinet space. Kitchen after Kitchen After After Kitchen Click these icons to share, thanks: A finished kitchen remodel done by Brian. The Handyguys Brian & Paul discuss a DIY kitchen remodel. Some of the topics discussed in this podcast: Planning Skills Tools Timeline Budget When to bring in a professional Listen to the podcast for details and enjoy the before and after pictures. The first three are before pictures. The rest are after. Click on any image for a full size view. Before Kitchen Kitchen Before Kitchen before The Santos Mahogany prefinished hardwood floor is an awesome change from the dingy vinyl floor. The refrigerator, stove and sink did not move location. The original dishwasher was a portable unit and was replaced with an undercounter unit. This made room for a pantry to the right of the refrigerator. The built in microwave helps save counter space with little loss of cabinet space. Kitchen after Kitchen After After Kitchen Click these icons to share, thanks: tag:odeo.com,2009-05-21,24592382 Thu, 21 May 2009 13:59:34 -0700 no Handyguys Podcast podcast, DIY, home improvement, kitchen, planning, lighting, ideas, renovation, electrical, Handyguys Podcast Category, Flooring, granite, tile, kitchen ideas, pendant light, cabinets, kitchen remodel, pendent, remodel, countertops Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24554325-Episode-64-Mower-Blades-Brakes-and-DIY-Mistakes Do you need to bend sheet metal? A "Brake" is the right tool foor the job. Click image to see full size. In this show we address a couple of listener questions about mower blades and metal brakes and then talk about another expensive DIY mistake. First up is a question from David: Do you guys have or know of any plans for a DIY metal brake? I need to cover the sills of my home windows, and would like to have a brake to bend the aluminum nicely myself. Thanks, David David, we are not familiar with any decent DIY brake plans. A brake is a specialized tool for bending metal. There is certainly no better tool for covering your sills with metal flashing. We recommend that you try and borrow one or rent this tool. A brake requires some practice but once you get the hang of it you can make some nice capping for your window sills and trim. We also got this question from Vishal: What tools do you need to loosen/tighten a lawn mower’s blade? Short answer - a wrench. Is that re... Do you need to bend sheet metal? A "Brake" is the right tool foor the job. Click image to see full size. In this show we address a couple of listener questions about mower blades and metal brakes and then talk about another expensive DIY mistake. First up is a question from David: Do you guys have or know of any plans for a DIY metal brake? I need to cover the sills of my home windows, and would like to have a brake to bend the aluminum nicely myself. Thanks, David David, we are not familiar with any decent DIY brake plans. A brake is a specialized tool for bending metal. There is certainly no better tool for covering your sills with metal flashing. We recommend that you try and borrow one or rent this tool. A brake requires some practice but once you get the hang of it you can make some nice capping for your window sills and trim. We also got this question from Vishal: What tools do you need to loosen/tighten a lawn mower’s blade? Short answer - a wrench. Is that really the question though? The Handyguys discuss how to keep the blade from spinning when you remove the bolt and how to apply a little more leverage if the bolt is stuck. Also why do we remove a mower blade anyway? Blades require sharpening, balancing and outright replacement from time to time. We covered sharpening blades and other basic tuneup tips in Episode 14, give it a listen. Expensive DIY Mistakes The Handyguys discuss another expensive DIY mistake Whats the mistake? Paying twice. Why would you pay twice? If you underestimate your abilities, do a job poorly, and need to pay a pro to come in and do it correctly. Perhaps the mistake is really not knowing your abilities. The handyguys discuss how to avoid this costly mistake. For this and more, give a listen to the podcast. Click these icons to share, thanks: Do you need to bend sheet metal? A "Brake" is the right tool foor the job. Click image to see full size. In this show we address a couple of listener questions about mower blades and metal brakes and then talk about another expensive DIY mistake. First up is a question from David: Do you guys have or know of any plans for a DIY metal brake? I need to cover the sills of my home windows, and would like to have a brake to bend the aluminum nicely myself. Thanks, David David, we are not familiar with any decent DIY brake plans. A brake is a specialized tool for bending metal. There is certainly no better tool for covering your sills with metal flashing. We recommend that you try and borrow one or rent this tool. A brake requires some practice but once you get the hang of it you can make some nice capping for your window sills and trim. We also got this question from Vishal: What tools do you need to loosen/tighten a lawn mower’s blade? Short answer - a wrench. Is that really the question though? The Handyguys discuss how to keep the blade from spinning when you remove the bolt and how to apply a little more leverage if the bolt is stuck. Also why do we remove a mower blade anyway? Blades require sharpening, balancing and outright replacement from time to time. We covered sharpening blades and other basic tuneup tips in Episode 14, give it a listen. Expensive DIY Mistakes The Handyguys discuss another expensive DIY mistake Whats the mistake? Paying twice. Why would you pay twice? If you underestimate your abilities, do a job poorly, and need to pay a pro to come in and do it correctly. Perhaps the mistake is really not knowing your abilities. The handyguys discuss how to avoid this costly mistake. For this and more, give a listen to the podcast. Click these icons to share, thanks: tag:odeo.com,2009-05-14,24554325 Thu, 14 May 2009 13:59:14 -0700 no Handyguys Podcast podcast, DIY, home improvement, brake, mistakes, rake, trim, mower, Blade, Handyguys Podcast Category, sill, alumninum, bending metal, facia, coil stock, metal bending, abilites, cover trim, soffit, estimating Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24834523-Episode-64-%E2%80%93-Mower-Blades-Brakes-and-DIY-Mistakes Do you need to bend sheet metal? A "Brake" is the right tool foor the job. Click image to see full size. In this show we address a couple of listener questions about mower blades and metal brakes and then talk about another expensive DIY mistake. First up is a question from David: Do you guys have or know of any plans for a DIY metal brake? I need to cover the sills of my home windows, and would like to have a brake to bend the aluminum nicely myself. Thanks, David David, we are not familiar with any decent DIY brake plans. A brake is a specialized tool for bending metal. There is certainly no better tool for covering your sills with metal flashing. We recommend that you try and borrow one or rent this tool. A brake requires some practice but once you get the hang of it you can make some nice capping for your window sills and trim. We also got this question from Vishal: What tools do you need to loosen/tighten a lawn mower’s blade? Short answer – a wrench. Is t... Do you need to bend sheet metal? A "Brake" is the right tool foor the job. Click image to see full size. In this show we address a couple of listener questions about mower blades and metal brakes and then talk about another expensive DIY mistake. First up is a question from David: Do you guys have or know of any plans for a DIY metal brake? I need to cover the sills of my home windows, and would like to have a brake to bend the aluminum nicely myself. Thanks, David David, we are not familiar with any decent DIY brake plans. A brake is a specialized tool for bending metal. There is certainly no better tool for covering your sills with metal flashing. We recommend that you try and borrow one or rent this tool. A brake requires some practice but once you get the hang of it you can make some nice capping for your window sills and trim. We also got this question from Vishal: What tools do you need to loosen/tighten a lawn mower’s blade? Short answer – a wrench. Is that really the question though? The Handyguys discuss how to keep the blade from spinning when you remove the bolt and how to apply a little more leverage if the bolt is stuck. Also why do we remove a mower blade anyway? Blades require sharpening, balancing and outright replacement from time to time. We covered sharpening blades and other basic tuneup tips in Episode 14, give it a listen. Expensive DIY Mistakes The Handyguys discuss another expensive DIY mistake Whats the mistake? Paying twice. Why would you pay twice? If you underestimate your abilities, do a job poorly, and need to pay a pro to come in and do it correctly. Perhaps the mistake is really not knowing your abilities. The handyguys discuss how to avoid this costly mistake. For this and more, give a listen to the podcast. Click these icons to share, thanks: Do you need to bend sheet metal? A "Brake" is the right tool foor the job. Click image to see full size. In this show we address a couple of listener questions about mower blades and metal brakes and then talk about another expensive DIY mistake. First up is a question from David: Do you guys have or know of any plans for a DIY metal brake? I need to cover the sills of my home windows, and would like to have a brake to bend the aluminum nicely myself. Thanks, David David, we are not familiar with any decent DIY brake plans. A brake is a specialized tool for bending metal. There is certainly no better tool for covering your sills with metal flashing. We recommend that you try and borrow one or rent this tool. A brake requires some practice but once you get the hang of it you can make some nice capping for your window sills and trim. We also got this question from Vishal: What tools do you need to loosen/tighten a lawn mower’s blade? Short answer – a wrench. Is that really the question though? The Handyguys discuss how to keep the blade from spinning when you remove the bolt and how to apply a little more leverage if the bolt is stuck. Also why do we remove a mower blade anyway? Blades require sharpening, balancing and outright replacement from time to time. We covered sharpening blades and other basic tuneup tips in Episode 14, give it a listen. Expensive DIY Mistakes The Handyguys discuss another expensive DIY mistake Whats the mistake? Paying twice. Why would you pay twice? If you underestimate your abilities, do a job poorly, and need to pay a pro to come in and do it correctly. Perhaps the mistake is really not knowing your abilities. The handyguys discuss how to avoid this costly mistake. For this and more, give a listen to the podcast. Click these icons to share, thanks: tag:odeo.com,2009-05-14,24834523 Thu, 14 May 2009 13:59:14 -0700 no Handyguys Podcast podcast, DIY, home improvement, brake, mistakes, rake, trim, mower, Blade, Handyguys Podcast Category, sill, alumninum, bending metal, facia, coil stock, metal bending, abilites, cover trim, soffit, estimating Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24554327-Episode-63-Handyguy-Hardwood-Floors This unique, high quality, floor was installed by Handyguy Brian. Listen to the podcast for details. The Handyguys tackle hard wood flooring. The Handyguys would like to thank A to Z Exotic Hardwoods for sponsoring this episode. They specialize in procuring the worlds most beautiful woods. With a virtually unlimited palette of colors and figures in native American as well as imported species, they can use the warmth and radiance of real woods to customize your interior projects Steve asked: Hey Handyguys… awesome shows.  I am planning to replace my carpets on the first floor of my house with hard wood flooring.  However, when I began to research hard wood flooring I learned that there are many kinds of “hard wood” flooring.  There are laminate floors, pre-finished floors, pre-engineered hardwoods and traditional solid hardwood planks.  And then there are laminate floors that use “fake” wood.  Please let me know what kind of wood flooring I should use on... This unique, high quality, floor was installed by Handyguy Brian. Listen to the podcast for details. The Handyguys tackle hard wood flooring. The Handyguys would like to thank A to Z Exotic Hardwoods for sponsoring this episode. They specialize in procuring the worlds most beautiful woods. With a virtually unlimited palette of colors and figures in native American as well as imported species, they can use the warmth and radiance of real woods to customize your interior projects Steve asked: Hey Handyguys… awesome shows.  I am planning to replace my carpets on the first floor of my house with hard wood flooring.  However, when I began to research hard wood flooring I learned that there are many kinds of “hard wood” flooring.  There are laminate floors, pre-finished floors, pre-engineered hardwoods and traditional solid hardwood planks.  And then there are laminate floors that use “fake” wood.  Please let me know what kind of wood flooring I should use on the first floor of my house including the kitchen. There are many choices in wood flooring especially since resellers are marketing wood from all over the world. Your floors should be flat, clean and stable before installing hardwood. Listen to the podcast for an overview of the install process. Let’s define your choices: Laminate flooring.  Several companies make laminate flooring that is uses particle board (or similar) as a base and then a top layer that is not necessarily wood.  It is made to look like wood.  This flooring is generally put down in sections that are glued or snapped together. Brian does not like this flooring for reasons that may surprise you. Listen to the podcast to find out why. Engineered flooring.  This flooring typically uses a plywood base with a layer of real wood on the top.  This wood has some benefits for installation and stability and can have a tough finish.  It can be pricey though. Traditional Hard wood flooring.  This is typically 3/4″ thick.  You have lots of choices from around the globe.  The installation will require a nailer and you have a choice between non-finished and pre-finished. So what kind of floor should the handyguy purchase and install? And how do you install it?  Listen to the podcast for our recommendations. The Handyguys would like to thank A to Z Exotic Hardwoods for sponsoring this episode. The images below are just a few of their customers floors. Click on the banner to visit their site and contact them if you want hardwood floors. Click each image to see a larger view. image8 image9 image7 image6 image5 image4 image3 image2 image1 Click these icons to share, thanks: This unique, high quality, floor was installed by Handyguy Brian. Listen to the podcast for details. The Handyguys tackle hard wood flooring. The Handyguys would like to thank A to Z Exotic Hardwoods for sponsoring this episode. They specialize in procuring the worlds most beautiful woods. With a virtually unlimited palette of colors and figures in native American as well as imported species, they can use the warmth and radiance of real woods to customize your interior projects Steve asked: Hey Handyguys… awesome shows.  I am planning to replace my carpets on the first floor of my house with hard wood flooring.  However, when I began to research hard wood flooring I learned that there are many kinds of “hard wood” flooring.  There are laminate floors, pre-finished floors, pre-engineered hardwoods and traditional solid hardwood planks.  And then there are laminate floors that use “fake” wood.  Please let me know what kind of wood flooring I should use on the first floor of my house including the kitchen. There are many choices in wood flooring especially since resellers are marketing wood from all over the world. Your floors should be flat, clean and stable before installing hardwood. Listen to the podcast for an overview of the install process. Let’s define your choices: Laminate flooring.  Several companies make laminate flooring that is uses particle board (or similar) as a base and then a top layer that is not necessarily wood.  It is made to look like wood.  This flooring is generally put down in sections that are glued or snapped together. Brian does not like this flooring for reasons that may surprise you. Listen to the podcast to find out why. Engineered flooring.  This flooring typically uses a plywood base with a layer of real wood on the top.  This wood has some benefits for installation and stability and can have a tough finish.  It can be pricey though. Traditional Hard wood flooring.  This is typically 3/4″ thick.  You have lots of choices from around the globe.  The installation will require a nailer and you have a choice between non-finished and pre-finished. So what kind of floor should the handyguy purchase and install? And how do you install it?  Listen to the podcast for our recommendations. The Handyguys would like to thank A to Z Exotic Hardwoods for sponsoring this episode. The images below are just a few of their customers floors. Click on the banner to visit their site and contact them if you want hardwood floors. Click each image to see a larger view. image8 image9 image7 image6 image5 image4 image3 image2 image1 Click these icons to share, thanks: tag:odeo.com,2009-05-07,24554327 Thu, 07 May 2009 13:59:14 -0700 no Handyguys Podcast plank, Ipe, trim, Hardwood Floors, Handyguys Podcast Category, Flooring, engineered, Tuscan Striped Pecan, laminate, Santos Mahogany, feature strip, exotic hardwood, tongue and groove, exotic hardwoods, aluminum oxide, engineered floors, Brazilian Maple, moulding, Red Oak, wide plank, hardwood flooring, Amendoim, Venetian Walnut, Alpine Maple, Bavarian Cherry, prefinished hardwood flooring, engineered hardwood flooring, Casanova Engineered, Sicilian Teak, Jatoba, molding, exotic hardwood flooring, White Oak, Tiete Rosewood, Indusparquet, Tigerwood, Victorian Padouk, Tauari, American Cherry, Brazilian Teak, aluminum oxide finish, Roman Magnolia, Brazilian Eucalyptus, Siena Rosewood, engineered hardwood floors, Tiete Chestnut, hardwood, American Maple, kitchens, Brazilian Cherry, Brazilian Walnut, Timborana, Verona Rosso, accent strip, A to Z, Murano Mahogany Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24834525-Episode-63-%E2%80%93-Handyguy-Hardwood-Floors This unique, high quality, floor was installed by Handyguy Brian. Listen to the podcast for details. The Handyguys tackle hard wood flooring. The Handyguys would like to thank A to Z Exotic Hardwoods for sponsoring this episode. They specialize in procuring the worlds most beautiful woods. With a virtually unlimited palette of colors and figures in native American as well as imported species, they can use the warmth and radiance of real woods to customize your interior projects Steve asked: Hey Handyguys… awesome shows.  I am planning to replace my carpets on the first floor of my house with hard wood flooring.  However, when I began to research hard wood flooring I learned that there are many kinds of “hard wood” flooring.  There are laminate floors, pre-finished floors, pre-engineered hardwoods and traditional solid hardwood planks.  And then there are laminate floors that use “fake” wood.  Please let me know what kind of wood flooring I should use on... This unique, high quality, floor was installed by Handyguy Brian. Listen to the podcast for details. The Handyguys tackle hard wood flooring. The Handyguys would like to thank A to Z Exotic Hardwoods for sponsoring this episode. They specialize in procuring the worlds most beautiful woods. With a virtually unlimited palette of colors and figures in native American as well as imported species, they can use the warmth and radiance of real woods to customize your interior projects Steve asked: Hey Handyguys… awesome shows.  I am planning to replace my carpets on the first floor of my house with hard wood flooring.  However, when I began to research hard wood flooring I learned that there are many kinds of “hard wood” flooring.  There are laminate floors, pre-finished floors, pre-engineered hardwoods and traditional solid hardwood planks.  And then there are laminate floors that use “fake” wood.  Please let me know what kind of wood flooring I should use on the first floor of my house including the kitchen. There are many choices in wood flooring especially since resellers are marketing wood from all over the world. Your floors should be flat, clean and stable before installing hardwood. Listen to the podcast for an overview of the install process. Let’s define your choices: Laminate flooring.  Several companies make laminate flooring that is uses particle board (or similar) as a base and then a top layer that is not necessarily wood.  It is made to look like wood.  This flooring is generally put down in sections that are glued or snapped together. Brian does not like this flooring for reasons that may surprise you. Listen to the podcast to find out why. Engineered flooring.  This flooring typically uses a plywood base with a layer of real wood on the top.  This wood has some benefits for installation and stability and can have a tough finish.  It can be pricey though. Traditional Hard wood flooring.  This is typically 3/4″ thick.  You have lots of choices from around the globe.  The installation will require a nailer and you have a choice between non-finished and pre-finished. So what kind of floor should the handyguy purchase and install? And how do you install it?  Listen to the podcast for our recommendations. The Handyguys would like to thank A to Z Exotic Hardwoods for sponsoring this episode. The images below are just a few of their customers floors. Click on the banner to visit their site and contact them if you want hardwood floors. Click each image to see a larger view. image8 image9 image7 image6 image5 image4 image3 image2 image1 Click these icons to share, thanks: This unique, high quality, floor was installed by Handyguy Brian. Listen to the podcast for details. The Handyguys tackle hard wood flooring. The Handyguys would like to thank A to Z Exotic Hardwoods for sponsoring this episode. They specialize in procuring the worlds most beautiful woods. With a virtually unlimited palette of colors and figures in native American as well as imported species, they can use the warmth and radiance of real woods to customize your interior projects Steve asked: Hey Handyguys… awesome shows.  I am planning to replace my carpets on the first floor of my house with hard wood flooring.  However, when I began to research hard wood flooring I learned that there are many kinds of “hard wood” flooring.  There are laminate floors, pre-finished floors, pre-engineered hardwoods and traditional solid hardwood planks.  And then there are laminate floors that use “fake” wood.  Please let me know what kind of wood flooring I should use on the first floor of my house including the kitchen. There are many choices in wood flooring especially since resellers are marketing wood from all over the world. Your floors should be flat, clean and stable before installing hardwood. Listen to the podcast for an overview of the install process. Let’s define your choices: Laminate flooring.  Several companies make laminate flooring that is uses particle board (or similar) as a base and then a top layer that is not necessarily wood.  It is made to look like wood.  This flooring is generally put down in sections that are glued or snapped together. Brian does not like this flooring for reasons that may surprise you. Listen to the podcast to find out why. Engineered flooring.  This flooring typically uses a plywood base with a layer of real wood on the top.  This wood has some benefits for installation and stability and can have a tough finish.  It can be pricey though. Traditional Hard wood flooring.  This is typically 3/4″ thick.  You have lots of choices from around the globe.  The installation will require a nailer and you have a choice between non-finished and pre-finished. So what kind of floor should the handyguy purchase and install? And how do you install it?  Listen to the podcast for our recommendations. The Handyguys would like to thank A to Z Exotic Hardwoods for sponsoring this episode. The images below are just a few of their customers floors. Click on the banner to visit their site and contact them if you want hardwood floors. Click each image to see a larger view. image8 image9 image7 image6 image5 image4 image3 image2 image1 Click these icons to share, thanks: tag:odeo.com,2009-05-07,24834525 Thu, 07 May 2009 13:59:14 -0700 no Handyguys Podcast plank, Ipe, trim, Hardwood Floors, Handyguys Podcast Category, Flooring, engineered, Tuscan Striped Pecan, laminate, Santos Mahogany, feature strip, exotic hardwood, tongue and groove, exotic hardwoods, aluminum oxide, engineered floors, Brazilian Maple, moulding, Red Oak, wide plank, hardwood flooring, Amendoim, Venetian Walnut, Alpine Maple, Bavarian Cherry, prefinished hardwood flooring, engineered hardwood flooring, Casanova Engineered, Sicilian Teak, Jatoba, molding, exotic hardwood flooring, White Oak, Tiete Rosewood, Indusparquet, Tigerwood, Victorian Padouk, Tauari, American Cherry, Brazilian Teak, aluminum oxide finish, Roman Magnolia, Brazilian Eucalyptus, Siena Rosewood, engineered hardwood floors, Tiete Chestnut, hardwood, American Maple, kitchens, Brazilian Cherry, Brazilian Walnut, Timborana, Verona Rosso, accent strip, A to Z, Murano Mahogany Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24523802-Episode-62-Primer-PEX-and-CFLs Primer, PEX and CFLs Costly Handyguy Mistakes: Primer. Use it or lose it. Skipping primer or improperly prepping a surface for paint cant be a Costly DIY Mistake The Handyguys continue their new segment this week called Costly DIY Mistakes. These are mistakes are ones we have personally seen or have been asked about by our listeners. This weeks mistake is not using primer when painting. The Handyguys discuss when you need to prime and when you don’t. Also discussed are stain blocking primers. A primer will help your finish paint job last longer. The Handyguys then address a question about PEX piping Our listener, Brian M., asks: Thanks for recommending your podcasts to me on Twitter. I’m just beginning a new basement finishing project and I’ve been enjoying your basement finishing podcast series. Great stuff! My question is about PEX tubing systems. I have to do some minor plumbing work as part of my project, including the relocation of one or two existing water su... Primer, PEX and CFLs Costly Handyguy Mistakes: Primer. Use it or lose it. Skipping primer or improperly prepping a surface for paint cant be a Costly DIY Mistake The Handyguys continue their new segment this week called Costly DIY Mistakes. These are mistakes are ones we have personally seen or have been asked about by our listeners. This weeks mistake is not using primer when painting. The Handyguys discuss when you need to prime and when you don’t. Also discussed are stain blocking primers. A primer will help your finish paint job last longer. The Handyguys then address a question about PEX piping Our listener, Brian M., asks: Thanks for recommending your podcasts to me on Twitter. I’m just beginning a new basement finishing project and I’ve been enjoying your basement finishing podcast series. Great stuff! My question is about PEX tubing systems. I have to do some minor plumbing work as part of my project, including the relocation of one or two existing water supply lines that are currently in the way. I’ve been considering PEX systems as a replacement for some existing PVC supply lines because of its supposed flexibility and ease of installation. Are there any pitfalls or difficulties to watch out for when using PEX? To save on headroom, would it be acceptable to run the PEX tubing across joists in the ceiling utilizing knock-out holes in the joists? I only have to relocate one or two existing supply lines and build a handfull of new supply lines. Do you think my project is too small to invest in the specialized tools needed to install PEX? Click on the image for a full size rendition of Sharkbite fittings The Handyguys discuss the question. What is the solution to costly PEX tools? Use SharkBite.  SharkBite® push-fit fittings are designed to simplify pipe installation. The fittings allow the user to connect pipe in seconds with relative ease. In Handyguy Brian’s recent project he was able to use Sharkbite fittings to simplify the installation, eliminate the need for a torch install without a completely dry joint. Check out the Sharkbite Selection at The Handyguys Amazon Store and listen to the podcast for the details. What are ya doing lately? Recent Handyguy Adventures Click the image to see it full size and so you can see the base Paul installed a new light fixture that included a CFL light bulb with a new kind of base. I guess the “Edison Base” isn’t good enough for those in the government. These new bulb bases will become more common. The base is called a GU24 base. It is a standard on new Energy Star rated light fixtures. The purpose is to prevent you from using a standard incandescent bulb in a new fixture. Oh, and the home centers and hardware stores are not always stocking these bulbs. As Paul found out, they sell the fixture and not the bulb. Argh. The Handyguys have a solution. Get your GU24 base bulbs from The Handyguys store. GU24 Bulb Selection at The Handyguys Amazon Store Lastly - our listener made reference to us being on twitter. You can follow us by following @handyguys or clicking here Click these icons to share, thanks: Primer, PEX and CFLs Costly Handyguy Mistakes: Primer. Use it or lose it. Skipping primer or improperly prepping a surface for paint cant be a Costly DIY Mistake The Handyguys continue their new segment this week called Costly DIY Mistakes. These are mistakes are ones we have personally seen or have been asked about by our listeners. This weeks mistake is not using primer when painting. The Handyguys discuss when you need to prime and when you don’t. Also discussed are stain blocking primers. A primer will help your finish paint job last longer. The Handyguys then address a question about PEX piping Our listener, Brian M., asks: Thanks for recommending your podcasts to me on Twitter. I’m just beginning a new basement finishing project and I’ve been enjoying your basement finishing podcast series. Great stuff! My question is about PEX tubing systems. I have to do some minor plumbing work as part of my project, including the relocation of one or two existing water supply lines that are currently in the way. I’ve been considering PEX systems as a replacement for some existing PVC supply lines because of its supposed flexibility and ease of installation. Are there any pitfalls or difficulties to watch out for when using PEX? To save on headroom, would it be acceptable to run the PEX tubing across joists in the ceiling utilizing knock-out holes in the joists? I only have to relocate one or two existing supply lines and build a handfull of new supply lines. Do you think my project is too small to invest in the specialized tools needed to install PEX? Click on the image for a full size rendition of Sharkbite fittings The Handyguys discuss the question. What is the solution to costly PEX tools? Use SharkBite.  SharkBite® push-fit fittings are designed to simplify pipe installation. The fittings allow the user to connect pipe in seconds with relative ease. In Handyguy Brian’s recent project he was able to use Sharkbite fittings to simplify the installation, eliminate the need for a torch install without a completely dry joint. Check out the Sharkbite Selection at The Handyguys Amazon Store and listen to the podcast for the details. What are ya doing lately? Recent Handyguy Adventures Click the image to see it full size and so you can see the base Paul installed a new light fixture that included a CFL light bulb with a new kind of base. I guess the “Edison Base” isn’t good enough for those in the government. These new bulb bases will become more common. The base is called a GU24 base. It is a standard on new Energy Star rated light fixtures. The purpose is to prevent you from using a standard incandescent bulb in a new fixture. Oh, and the home centers and hardware stores are not always stocking these bulbs. As Paul found out, they sell the fixture and not the bulb. Argh. The Handyguys have a solution. Get your GU24 base bulbs from The Handyguys store. GU24 Bulb Selection at The Handyguys Amazon Store Lastly - our listener made reference to us being on twitter. You can follow us by following @handyguys or clicking here Click these icons to share, thanks: tag:odeo.com,2009-04-30,24523802 Thu, 30 Apr 2009 13:59:06 -0700 no Handyguys Podcast twitter, DIY, home improvement, solder, mistakes, pvc, paint, primer, handyguys, copper, plumbing, Handyguys Podcast Category, cfl, Energy Star, pex, bulbs, valves, GU24, Sharkbite, Edison base, fittings, kilz, cpvc, GU24 base Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24834528-Episode-62-%E2%80%93-Primer-PEX-and-CFLs Primer, PEX and CFLs Costly Handyguy Mistakes: Primer. Use it or lose it. Skipping primer or improperly prepping a surface for paint cant be a Costly DIY Mistake The Handyguys continue their new segment this week called Costly DIY Mistakes. These are mistakes are ones we have personally seen or have been asked about by our listeners. This weeks mistake is not using primer when painting. The Handyguys discuss when you need to prime and when you don’t. Also discussed are stain blocking primers. A primer will help your finish paint job last longer. The Handyguys then address a question about PEX piping Our listener, Brian M., asks: Thanks for recommending your podcasts to me on Twitter. I’m just beginning a new basement finishing project and I’ve been enjoying your basement finishing podcast series. Great stuff! My question is about PEX tubing systems. I have to do some minor plumbing work as part of my project, including the relocation of one or two existing water su... Primer, PEX and CFLs Costly Handyguy Mistakes: Primer. Use it or lose it. Skipping primer or improperly prepping a surface for paint cant be a Costly DIY Mistake The Handyguys continue their new segment this week called Costly DIY Mistakes. These are mistakes are ones we have personally seen or have been asked about by our listeners. This weeks mistake is not using primer when painting. The Handyguys discuss when you need to prime and when you don’t. Also discussed are stain blocking primers. A primer will help your finish paint job last longer. The Handyguys then address a question about PEX piping Our listener, Brian M., asks: Thanks for recommending your podcasts to me on Twitter. I’m just beginning a new basement finishing project and I’ve been enjoying your basement finishing podcast series. Great stuff! My question is about PEX tubing systems. I have to do some minor plumbing work as part of my project, including the relocation of one or two existing water supply lines that are currently in the way. I’ve been considering PEX systems as a replacement for some existing PVC supply lines because of its supposed flexibility and ease of installation. Are there any pitfalls or difficulties to watch out for when using PEX? To save on headroom, would it be acceptable to run the PEX tubing across joists in the ceiling utilizing knock-out holes in the joists? I only have to relocate one or two existing supply lines and build a handfull of new supply lines. Do you think my project is too small to invest in the specialized tools needed to install PEX? Click on the image for a full size rendition of Sharkbite fittings The Handyguys discuss the question. What is the solution to costly PEX tools? Use SharkBite.  SharkBite® push-fit fittings are designed to simplify pipe installation. The fittings allow the user to connect pipe in seconds with relative ease. In Handyguy Brian’s recent project he was able to use Sharkbite fittings to simplify the installation, eliminate the need for a torch install without a completely dry joint. Check out the Sharkbite Selection at The Handyguys Amazon Store and listen to the podcast for the details. What are ya doing lately? Recent Handyguy Adventures Click the image to see it full size and so you can see the base Paul installed a new light fixture that included a CFL light bulb with a new kind of base. I guess the “Edison Base” isn’t good enough for those in the government. These new bulb bases will become more common. The base is called a GU24 base. It is a standard on new Energy Star rated light fixtures. The purpose is to prevent you from using a standard incandescent bulb in a new fixture. Oh, and the home centers and hardware stores are not always stocking these bulbs. As Paul found out, they sell the fixture and not the bulb. Argh. The Handyguys have a solution. Get your GU24 base bulbs from The Handyguys store. GU24 Bulb Selection at The Handyguys Amazon Store Lastly – our listener made reference to us being on twitter. You can follow us by following @handyguys or clicking here Click these icons to share, thanks: Primer, PEX and CFLs Costly Handyguy Mistakes: Primer. Use it or lose it. Skipping primer or improperly prepping a surface for paint cant be a Costly DIY Mistake The Handyguys continue their new segment this week called Costly DIY Mistakes. These are mistakes are ones we have personally seen or have been asked about by our listeners. This weeks mistake is not using primer when painting. The Handyguys discuss when you need to prime and when you don’t. Also discussed are stain blocking primers. A primer will help your finish paint job last longer. The Handyguys then address a question about PEX piping Our listener, Brian M., asks: Thanks for recommending your podcasts to me on Twitter. I’m just beginning a new basement finishing project and I’ve been enjoying your basement finishing podcast series. Great stuff! My question is about PEX tubing systems. I have to do some minor plumbing work as part of my project, including the relocation of one or two existing water supply lines that are currently in the way. I’ve been considering PEX systems as a replacement for some existing PVC supply lines because of its supposed flexibility and ease of installation. Are there any pitfalls or difficulties to watch out for when using PEX? To save on headroom, would it be acceptable to run the PEX tubing across joists in the ceiling utilizing knock-out holes in the joists? I only have to relocate one or two existing supply lines and build a handfull of new supply lines. Do you think my project is too small to invest in the specialized tools needed to install PEX? Click on the image for a full size rendition of Sharkbite fittings The Handyguys discuss the question. What is the solution to costly PEX tools? Use SharkBite.  SharkBite® push-fit fittings are designed to simplify pipe installation. The fittings allow the user to connect pipe in seconds with relative ease. In Handyguy Brian’s recent project he was able to use Sharkbite fittings to simplify the installation, eliminate the need for a torch install without a completely dry joint. Check out the Sharkbite Selection at The Handyguys Amazon Store and listen to the podcast for the details. What are ya doing lately? Recent Handyguy Adventures Click the image to see it full size and so you can see the base Paul installed a new light fixture that included a CFL light bulb with a new kind of base. I guess the “Edison Base” isn’t good enough for those in the government. These new bulb bases will become more common. The base is called a GU24 base. It is a standard on new Energy Star rated light fixtures. The purpose is to prevent you from using a standard incandescent bulb in a new fixture. Oh, and the home centers and hardware stores are not always stocking these bulbs. As Paul found out, they sell the fixture and not the bulb. Argh. The Handyguys have a solution. Get your GU24 base bulbs from The Handyguys store. GU24 Bulb Selection at The Handyguys Amazon Store Lastly – our listener made reference to us being on twitter. You can follow us by following @handyguys or clicking here Click these icons to share, thanks: tag:odeo.com,2009-04-30,24834528 Thu, 30 Apr 2009 13:59:06 -0700 no Handyguys Podcast twitter, DIY, home improvement, solder, mistakes, pvc, paint, primer, handyguys, copper, plumbing, Handyguys Podcast Category, cfl, Energy Star, pex, bulbs, valves, GU24, Sharkbite, Edison base, fittings, kilz, cpvc, GU24 base Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/25333828-Episode-61-%E2%80%93-Costly-DIY-Mistakes-and-Listener-Questions Costly DIY Mistakes and Listener Questions First off – The Handyguys welcome listeners from RFC Radio and give them a brief background on The Handyguys. Costly DIY Mistakes Having to pump water from a finished basement is a costly mistake This week we talk about the most costly mistake a DIYer can make when finishing a basement—not taking care of potential water issues before finishing your basement. Water can damage your belongings and your newly finished wall and flooring and can cause mold, rot and decay. The Handyguys provide some tips to ensure your basement will stay dry. Even if you are not finishing your basement, check out the podcast tips and keep your basement dry! Ideally, water penetration is prevented from the outside of your foundation wall. The most common contributor of a damp or wet basement is improper grading around your house. If the ground around your house slopes toward your house then water will likely find its way into your basement. Fix the grading an... Costly DIY Mistakes and Listener Questions First off – The Handyguys welcome listeners from RFC Radio and give them a brief background on The Handyguys. Costly DIY Mistakes Having to pump water from a finished basement is a costly mistake This week we talk about the most costly mistake a DIYer can make when finishing a basement—not taking care of potential water issues before finishing your basement. Water can damage your belongings and your newly finished wall and flooring and can cause mold, rot and decay. The Handyguys provide some tips to ensure your basement will stay dry. Even if you are not finishing your basement, check out the podcast tips and keep your basement dry! Ideally, water penetration is prevented from the outside of your foundation wall. The most common contributor of a damp or wet basement is improper grading around your house. If the ground around your house slopes toward your house then water will likely find its way into your basement. Fix the grading and you can prevent most water problems. Another common contributor to water in the basement are short downspouts that empty water to close to the foundation. You should extend your downspouts at least four feet to six feet from your house. Listener Questions Broken Window The Handyguys then address a question left as a comment on our show about window repair. Bonnie Writes: Randomly exploding windows? What could be going on? Listen to the podcast for some discussion about the problem. Hi, My husband and I have been searching the net looking for an answer. Our home has vinyl windows they are probably at least 15 yrs. old. So this year in the last 4 months they have started to literally explode. So far 4 of them. We were actually home when one went tonight, it sounded like an explosion, we thought someone threw a brick at our house. After looking around sure enough it had happened again. We can’t figure this out. They are double pane, argon gas filled. No real pattern, sometimes its the inside pane (1) and sometimes the outside pane (3). Can you by any chance tell us whats going on? I am going to call the insurance agent tomorrow but I don’t know if they will cover something like this. any ideas would be most appreciated. Thank you Bonnie The Handyguys address this very odd issue and give some suggestions for Bonnie. Listen to the podcast for details. HE Furnace Vent Another fan write us ad asked about critters getting into the vents for their new High Efficiency furnace. Diane Wrote: Just had a 95% high efficient furnace installed with the vent going out the side of my home (PVC pipe). My concern is that a small animal could crawl into it? Should it have some sort on grate on it? It is only @ 2 feet from the ground. Thanks! Diane – The way your vents are installed is normal. We do have some suggestions if critters become an issue or you are concerned. Listen to the podcast for details and discussion. Dryer vent Discussions The Handyguys wrap up the show with a brief discussion of dryer vent cleaning. This should be an additional item for our Spring Home Inspection Checklist that was discussed during show 57. Do you clean your dryer vents? Any tips you would like to share with other listeners? Leave a comment. Costly DIY Mistakes and Listener Questions First off – The Handyguys welcome listeners from RFC Radio and give them a brief background on The Handyguys. Costly DIY Mistakes Having to pump water from a finished basement is a costly mistake This week we talk about the most costly mistake a DIYer can make when finishing a basement—not taking care of potential water issues before finishing your basement. Water can damage your belongings and your newly finished wall and flooring and can cause mold, rot and decay. The Handyguys provide some tips to ensure your basement will stay dry. Even if you are not finishing your basement, check out the podcast tips and keep your basement dry! Ideally, water penetration is prevented from the outside of your foundation wall. The most common contributor of a damp or wet basement is improper grading around your house. If the ground around your house slopes toward your house then water will likely find its way into your basement. Fix the grading and you can prevent most water problems. Another common contributor to water in the basement are short downspouts that empty water to close to the foundation. You should extend your downspouts at least four feet to six feet from your house. Listener Questions Broken Window The Handyguys then address a question left as a comment on our show about window repair. Bonnie Writes: Randomly exploding windows? What could be going on? Listen to the podcast for some discussion about the problem. Hi, My husband and I have been searching the net looking for an answer. Our home has vinyl windows they are probably at least 15 yrs. old. So this year in the last 4 months they have started to literally explode. So far 4 of them. We were actually home when one went tonight, it sounded like an explosion, we thought someone threw a brick at our house. After looking around sure enough it had happened again. We can’t figure this out. They are double pane, argon gas filled. No real pattern, sometimes its the inside pane (1) and sometimes the outside pane (3). Can you by any chance tell us whats going on? I am going to call the insurance agent tomorrow but I don’t know if they will cover something like this. any ideas would be most appreciated. Thank you Bonnie The Handyguys address this very odd issue and give some suggestions for Bonnie. Listen to the podcast for details. HE Furnace Vent Another fan write us ad asked about critters getting into the vents for their new High Efficiency furnace. Diane Wrote: Just had a 95% high efficient furnace installed with the vent going out the side of my home (PVC pipe). My concern is that a small animal could crawl into it? Should it have some sort on grate on it? It is only @ 2 feet from the ground. Thanks! Diane – The way your vents are installed is normal. We do have some suggestions if critters become an issue or you are concerned. Listen to the podcast for details and discussion. Dryer vent Discussions The Handyguys wrap up the show with a brief discussion of dryer vent cleaning. This should be an additional item for our Spring Home Inspection Checklist that was discussed during show 57. Do you clean your dryer vents? Any tips you would like to share with other listeners? Leave a comment. tag:odeo.com,2009-04-23,25333828 Thu, 23 Apr 2009 13:59:09 -0700 no Handyguys Podcast podcast, Windows, DIY, water, mistakes, pvc, vinyl, Window Repair, furnace, Basement Finishing Series, mold, Handyguys Podcast Category, Mold Prevention, dryer, water mitigation, Gutters, grading, vent covers, basement walls, RFC Radio, duct cleaning, Home Imprvement, sump pump, vent cleaning, ground water Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24493879-Episode-61-Costly-DIY-Mistakes-and-Listener-Questions Costly DIY Mistakes and Listener Questions First off - The Handyguys welcome listeners from RFC Radio and give them a brief background on The Handyguys. Costly DIY Mistakes Having to pump water from a finished basement is a costly mistake We hope to cover various costly mistakes in future shows. This week we talk about the most costly mistake a DIYer can make when finishing a basement. That mistake is to not take care of potential water issues before finishing your basement. Water can not only damage your belongings and your newly finished wall and flooring but water can also lead to mold, rot and decay. The Handyguys discuss some tips to ensure your basement will stay dry. Even if you are not finishing your basement some of these tips will be helpful to keep things dry in your basement which is a good thing. Ideally all water should be controlled from the outside. The most common contributor of a damp or wet basement is improper grading around your house. Water flows down hill. If ... Costly DIY Mistakes and Listener Questions First off - The Handyguys welcome listeners from RFC Radio and give them a brief background on The Handyguys. Costly DIY Mistakes Having to pump water from a finished basement is a costly mistake We hope to cover various costly mistakes in future shows. This week we talk about the most costly mistake a DIYer can make when finishing a basement. That mistake is to not take care of potential water issues before finishing your basement. Water can not only damage your belongings and your newly finished wall and flooring but water can also lead to mold, rot and decay. The Handyguys discuss some tips to ensure your basement will stay dry. Even if you are not finishing your basement some of these tips will be helpful to keep things dry in your basement which is a good thing. Ideally all water should be controlled from the outside. The most common contributor of a damp or wet basement is improper grading around your house. Water flows down hill. If the ground around your house slopes toward your house then water will likely find its way into your basement. Fix the grading and you may be able to fix your water problems. Another common contributor to water in he basement is related to grading. Downspouts are often too short, they dump all the water from your roof and gutters right next to the foundation. This water can easily work its way into a basement. You should extend your downspouts at least four feet, six is even better. Listener Questions Broken Window The Handyguys then address a question left as a comment on our show about window repair. Bonnie Writes: Randomly exploding windows? What could be going on? Listen to the podcast for some discussion about the problem. Hi, My husband and I have been searching the net looking for an answer. Our home has vinyl windows they are probably at least 15 yrs. old. So this year in the last 4 months they have started to literally explode. So far 4 of them. We were actually home when one went tonight, it sounded like an explosion, we thought someone threw a brick at our house. After looking around sure enough it had happened again. We can’t figure this out. They are double pane, argon gas filled. No real pattern, sometimes its the inside pane (1) and sometimes the outside pane (3). Can you by any chance tell us whats going on? I am going to call the insurance agent tomorrow but I don’t know if they will cover something like this. any ideas would be most appreciated. Thank you Bonnie The Handyguys address this very odd issue and give some suggestions for Bonnie. Listen to the podcast for details. HE Furnace Vent Another fan write us ad asked about critters getting into the vents for their new High Efficiency furnace. Diane Wrote: Just had a 95% high efficient furnace installed with the vent going out the side of my home (PVC pipe). My concern is that a small animal could crawl into it? Should it have some sort on grate on it? It is only @ 2 feet from the ground. Thanks! Diane - The way your vents are installed is normal. We do have some suggestions if critters become an issue or you are concerned. Listen to the podcast for details and discussion. Dryer vent Discussions The Handyguys wrap up the show with a brief discussion of dryer vent cleaning. This should be an additional item for our Spring Home Inspection Checklist that was discussed during show 57. Do you clean your dryer vents? Any tips you would like to share with other listeners? Leave a comment. Click these icons to share, thanks: Costly DIY Mistakes and Listener Questions First off - The Handyguys welcome listeners from RFC Radio and give them a brief background on The Handyguys. Costly DIY Mistakes Having to pump water from a finished basement is a costly mistake We hope to cover various costly mistakes in future shows. This week we talk about the most costly mistake a DIYer can make when finishing a basement. That mistake is to not take care of potential water issues before finishing your basement. Water can not only damage your belongings and your newly finished wall and flooring but water can also lead to mold, rot and decay. The Handyguys discuss some tips to ensure your basement will stay dry. Even if you are not finishing your basement some of these tips will be helpful to keep things dry in your basement which is a good thing. Ideally all water should be controlled from the outside. The most common contributor of a damp or wet basement is improper grading around your house. Water flows down hill. If the ground around your house slopes toward your house then water will likely find its way into your basement. Fix the grading and you may be able to fix your water problems. Another common contributor to water in he basement is related to grading. Downspouts are often too short, they dump all the water from your roof and gutters right next to the foundation. This water can easily work its way into a basement. You should extend your downspouts at least four feet, six is even better. Listener Questions Broken Window The Handyguys then address a question left as a comment on our show about window repair. Bonnie Writes: Randomly exploding windows? What could be going on? Listen to the podcast for some discussion about the problem. Hi, My husband and I have been searching the net looking for an answer. Our home has vinyl windows they are probably at least 15 yrs. old. So this year in the last 4 months they have started to literally explode. So far 4 of them. We were actually home when one went tonight, it sounded like an explosion, we thought someone threw a brick at our house. After looking around sure enough it had happened again. We can’t figure this out. They are double pane, argon gas filled. No real pattern, sometimes its the inside pane (1) and sometimes the outside pane (3). Can you by any chance tell us whats going on? I am going to call the insurance agent tomorrow but I don’t know if they will cover something like this. any ideas would be most appreciated. Thank you Bonnie The Handyguys address this very odd issue and give some suggestions for Bonnie. Listen to the podcast for details. HE Furnace Vent Another fan write us ad asked about critters getting into the vents for their new High Efficiency furnace. Diane Wrote: Just had a 95% high efficient furnace installed with the vent going out the side of my home (PVC pipe). My concern is that a small animal could crawl into it? Should it have some sort on grate on it? It is only @ 2 feet from the ground. Thanks! Diane - The way your vents are installed is normal. We do have some suggestions if critters become an issue or you are concerned. Listen to the podcast for details and discussion. Dryer vent Discussions The Handyguys wrap up the show with a brief discussion of dryer vent cleaning. This should be an additional item for our Spring Home Inspection Checklist that was discussed during show 57. Do you clean your dryer vents? Any tips you would like to share with other listeners? Leave a comment. Click these icons to share, thanks: tag:odeo.com,2009-04-23,24493879 Thu, 23 Apr 2009 12:59:09 -0700 no Handyguys Podcast podcast, Windows, DIY, water, mistakes, pvc, vinyl, Window Repair, furnace, Basement Finishing Series, mold, Handyguys Podcast Category, Mold Prevention, dryer, water mitigation, Gutters, grading, vent covers, basement walls, RFC Radio, duct cleaning, Home Imprvement, sump pump, vent cleaning, ground water Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24834529-Episode-61-%E2%80%93-Costly-DIY-Mistakes-and-Listener-Questions Costly DIY Mistakes and Listener Questions First off – The Handyguys welcome listeners from RFC Radio and give them a brief background on The Handyguys. Costly DIY Mistakes Having to pump water from a finished basement is a costly mistake This week we talk about the most costly mistake a DIYer can make when finishing a basement—not taking care of potential water issues before finishing your basement. Water can damage your belongings and your newly finished wall and flooring and can cause mold, rot and decay. The Handyguys provide some tips to ensure your basement will stay dry. Even if you are not finishing your basement, check out the podcast tips and keep your basement dry! Ideally, water penetration is prevented from the outside of your foundation wall. The most common contributor of a damp or wet basement is improper grading around your house. If the ground around your house slopes toward your house then water will likely find its way into your basement. Fix the grading an... Costly DIY Mistakes and Listener Questions First off – The Handyguys welcome listeners from RFC Radio and give them a brief background on The Handyguys. Costly DIY Mistakes Having to pump water from a finished basement is a costly mistake This week we talk about the most costly mistake a DIYer can make when finishing a basement—not taking care of potential water issues before finishing your basement. Water can damage your belongings and your newly finished wall and flooring and can cause mold, rot and decay. The Handyguys provide some tips to ensure your basement will stay dry. Even if you are not finishing your basement, check out the podcast tips and keep your basement dry! Ideally, water penetration is prevented from the outside of your foundation wall. The most common contributor of a damp or wet basement is improper grading around your house. If the ground around your house slopes toward your house then water will likely find its way into your basement. Fix the grading and you can prevent most water problems. Another common contributor to water in the basement are short downspouts that empty water to close to the foundation. You should extend your downspouts at least four feet to six feet from your house. Listener Questions Broken Window The Handyguys then address a question left as a comment on our show about window repair. Bonnie Writes: Randomly exploding windows? What could be going on? Listen to the podcast for some discussion about the problem. Hi, My husband and I have been searching the net looking for an answer. Our home has vinyl windows they are probably at least 15 yrs. old. So this year in the last 4 months they have started to literally explode. So far 4 of them. We were actually home when one went tonight, it sounded like an explosion, we thought someone threw a brick at our house. After looking around sure enough it had happened again. We can’t figure this out. They are double pane, argon gas filled. No real pattern, sometimes its the inside pane (1) and sometimes the outside pane (3). Can you by any chance tell us whats going on? I am going to call the insurance agent tomorrow but I don’t know if they will cover something like this. any ideas would be most appreciated. Thank you Bonnie The Handyguys address this very odd issue and give some suggestions for Bonnie. Listen to the podcast for details. HE Furnace Vent Another fan write us ad asked about critters getting into the vents for their new High Efficiency furnace. Diane Wrote: Just had a 95% high efficient furnace installed with the vent going out the side of my home (PVC pipe). My concern is that a small animal could crawl into it? Should it have some sort on grate on it? It is only @ 2 feet from the ground. Thanks! Diane – The way your vents are installed is normal. We do have some suggestions if critters become an issue or you are concerned. Listen to the podcast for details and discussion. Dryer vent Discussions The Handyguys wrap up the show with a brief discussion of dryer vent cleaning. This should be an additional item for our Spring Home Inspection Checklist that was discussed during show 57. Do you clean your dryer vents? Any tips you would like to share with other listeners? Leave a comment. Click these icons to share, thanks: Costly DIY Mistakes and Listener Questions First off – The Handyguys welcome listeners from RFC Radio and give them a brief background on The Handyguys. Costly DIY Mistakes Having to pump water from a finished basement is a costly mistake This week we talk about the most costly mistake a DIYer can make when finishing a basement—not taking care of potential water issues before finishing your basement. Water can damage your belongings and your newly finished wall and flooring and can cause mold, rot and decay. The Handyguys provide some tips to ensure your basement will stay dry. Even if you are not finishing your basement, check out the podcast tips and keep your basement dry! Ideally, water penetration is prevented from the outside of your foundation wall. The most common contributor of a damp or wet basement is improper grading around your house. If the ground around your house slopes toward your house then water will likely find its way into your basement. Fix the grading and you can prevent most water problems. Another common contributor to water in the basement are short downspouts that empty water to close to the foundation. You should extend your downspouts at least four feet to six feet from your house. Listener Questions Broken Window The Handyguys then address a question left as a comment on our show about window repair. Bonnie Writes: Randomly exploding windows? What could be going on? Listen to the podcast for some discussion about the problem. Hi, My husband and I have been searching the net looking for an answer. Our home has vinyl windows they are probably at least 15 yrs. old. So this year in the last 4 months they have started to literally explode. So far 4 of them. We were actually home when one went tonight, it sounded like an explosion, we thought someone threw a brick at our house. After looking around sure enough it had happened again. We can’t figure this out. They are double pane, argon gas filled. No real pattern, sometimes its the inside pane (1) and sometimes the outside pane (3). Can you by any chance tell us whats going on? I am going to call the insurance agent tomorrow but I don’t know if they will cover something like this. any ideas would be most appreciated. Thank you Bonnie The Handyguys address this very odd issue and give some suggestions for Bonnie. Listen to the podcast for details. HE Furnace Vent Another fan write us ad asked about critters getting into the vents for their new High Efficiency furnace. Diane Wrote: Just had a 95% high efficient furnace installed with the vent going out the side of my home (PVC pipe). My concern is that a small animal could crawl into it? Should it have some sort on grate on it? It is only @ 2 feet from the ground. Thanks! Diane – The way your vents are installed is normal. We do have some suggestions if critters become an issue or you are concerned. Listen to the podcast for details and discussion. Dryer vent Discussions The Handyguys wrap up the show with a brief discussion of dryer vent cleaning. This should be an additional item for our Spring Home Inspection Checklist that was discussed during show 57. Do you clean your dryer vents? Any tips you would like to share with other listeners? Leave a comment. Click these icons to share, thanks: tag:odeo.com,2009-04-23,24834529 Thu, 23 Apr 2009 12:59:09 -0700 no Handyguys Podcast podcast, Windows, DIY, water, mistakes, pvc, vinyl, Window Repair, furnace, Basement Finishing Series, mold, Handyguys Podcast Category, Mold Prevention, dryer, water mitigation, Gutters, grading, vent covers, basement walls, RFC Radio, duct cleaning, Home Imprvement, sump pump, vent cleaning, ground water Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/25333830-Episode-60-%E2%80%93-Behind-the-Scenes-with-the-Handyguys The Handyguys are interviewed by a local Ohio Newspaper. The Handyguys were interviewed by Joy Brown from the The Courier in Findlay Ohio. We recorded the interview and turned it into a podcast. Some of the topics covered in the interview: Spring repairs Gutters, repair or replacement Shingles Spring Time Home Inspection Check out the home inspection checklist as part of Episode 57 Are you ready for a DIY project? Do you have the right skills? Have you helped someone else with your particular project? What resources do you have? Tools? Money? Time? Are you ready to DIY was also discussed in regards to basements in Episode 16 Background on Handyguys Podcast How we got started Where we learned what we learned Some of our most successful projects Some of our project failures Some other online resources Tile – John Bridge Plumbing – Terry Love Electrical – EZ DIY Electricity Woodworking – The Wood Whisperer You can check out the article written By Joy Brown after... The Handyguys are interviewed by a local Ohio Newspaper. The Handyguys were interviewed by Joy Brown from the The Courier in Findlay Ohio. We recorded the interview and turned it into a podcast. Some of the topics covered in the interview: Spring repairs Gutters, repair or replacement Shingles Spring Time Home Inspection Check out the home inspection checklist as part of Episode 57 Are you ready for a DIY project? Do you have the right skills? Have you helped someone else with your particular project? What resources do you have? Tools? Money? Time? Are you ready to DIY was also discussed in regards to basements in Episode 16 Background on Handyguys Podcast How we got started Where we learned what we learned Some of our most successful projects Some of our project failures Some other online resources Tile – John Bridge Plumbing – Terry Love Electrical – EZ DIY Electricity Woodworking – The Wood Whisperer You can check out the article written By Joy Brown after the interview here http://www.thecourier.com/Issues/2009/Apr/19/ar_news_041909_story3.asp Thanks for listening. We will be back next week with more home improvement advice. As always, if you have any questions about you home just let us know. The Handyguys are interviewed by a local Ohio Newspaper. The Handyguys were interviewed by Joy Brown from the The Courier in Findlay Ohio. We recorded the interview and turned it into a podcast. Some of the topics covered in the interview: Spring repairs Gutters, repair or replacement Shingles Spring Time Home Inspection Check out the home inspection checklist as part of Episode 57 Are you ready for a DIY project? Do you have the right skills? Have you helped someone else with your particular project? What resources do you have? Tools? Money? Time? Are you ready to DIY was also discussed in regards to basements in Episode 16 Background on Handyguys Podcast How we got started Where we learned what we learned Some of our most successful projects Some of our project failures Some other online resources Tile – John Bridge Plumbing – Terry Love Electrical – EZ DIY Electricity Woodworking – The Wood Whisperer You can check out the article written By Joy Brown after the interview here http://www.thecourier.com/Issues/2009/Apr/19/ar_news_041909_story3.asp Thanks for listening. We will be back next week with more home improvement advice. As always, if you have any questions about you home just let us know. tag:odeo.com,2009-04-16,25333830 Thu, 16 Apr 2009 13:59:15 -0700 no Handyguys Podcast podcast, time, spring, DIY, home improvement, Success, failure, skills, home inspection, shingles, Handyguys Podcast Category, Gutters, Online Resources, repairs, The Handyguys, Joy Brown Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24459643-Episode-60-Behind-the-Scenes-with-the-Handyguys The Handyguys are interviewed by a local Ohio Newspaper. The Handyguys were interviewed by Joy Brown from the The Courier in Findlay Ohio. We recorded the interview and turned it into a podcast. Some of the topics covered in the interview: Spring repairs Gutters, repair or replacement Shingles Spring Time Home Inspection Check out the home inspection checklist as part of Episode 57 Are you ready for a DIY project? Do you have the right skills? Have you helped someone else with your particular project? What resources do you have? Tools? Money? Time? Are you ready to DIY was also discussed in regards to basements in Episode 16 Background on Handyguys Podcast How we got started Where we learned what we learned Some of our most successful projects Some of our project failures Some other online resources Tile - John Bridge Plumbing - Terry Love Electrical - EZ DIY Electricity Woodworking - The Wood Whisperer You can check out the article written By Joy Brown after the interview here http... The Handyguys are interviewed by a local Ohio Newspaper. The Handyguys were interviewed by Joy Brown from the The Courier in Findlay Ohio. We recorded the interview and turned it into a podcast. Some of the topics covered in the interview: Spring repairs Gutters, repair or replacement Shingles Spring Time Home Inspection Check out the home inspection checklist as part of Episode 57 Are you ready for a DIY project? Do you have the right skills? Have you helped someone else with your particular project? What resources do you have? Tools? Money? Time? Are you ready to DIY was also discussed in regards to basements in Episode 16 Background on Handyguys Podcast How we got started Where we learned what we learned Some of our most successful projects Some of our project failures Some other online resources Tile - John Bridge Plumbing - Terry Love Electrical - EZ DIY Electricity Woodworking - The Wood Whisperer You can check out the article written By Joy Brown after the interview here http://www.thecourier.com/ Thanks for listening. We will be back next week with more home improvement advice. As always, if you have any questions about you home just let us know. Click these icons to share, thanks: The Handyguys are interviewed by a local Ohio Newspaper. The Handyguys were interviewed by Joy Brown from the The Courier in Findlay Ohio. We recorded the interview and turned it into a podcast. Some of the topics covered in the interview: Spring repairs Gutters, repair or replacement Shingles Spring Time Home Inspection Check out the home inspection checklist as part of Episode 57 Are you ready for a DIY project? Do you have the right skills? Have you helped someone else with your particular project? What resources do you have? Tools? Money? Time? Are you ready to DIY was also discussed in regards to basements in Episode 16 Background on Handyguys Podcast How we got started Where we learned what we learned Some of our most successful projects Some of our project failures Some other online resources Tile - John Bridge Plumbing - Terry Love Electrical - EZ DIY Electricity Woodworking - The Wood Whisperer You can check out the article written By Joy Brown after the interview here http://www.thecourier.com/ Thanks for listening. We will be back next week with more home improvement advice. As always, if you have any questions about you home just let us know. Click these icons to share, thanks: tag:odeo.com,2009-04-16,24459643 Thu, 16 Apr 2009 12:59:15 -0700 no Handyguys Podcast podcast, time, spring, DIY, home improvement, Success, failure, skills, home inspection, shingles, Handyguys Podcast Category, Gutters, Online Resources, repairs, The Handyguys, Joy Brown Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24834530-Episode-60-%E2%80%93-Behind-the-Scenes-with-the-Handyguys The Handyguys are interviewed by a local Ohio Newspaper. The Handyguys were interviewed by Joy Brown from the The Courier in Findlay Ohio. We recorded the interview and turned it into a podcast. Some of the topics covered in the interview: Spring repairs Gutters, repair or replacement Shingles Spring Time Home Inspection Check out the home inspection checklist as part of Episode 57 Are you ready for a DIY project? Do you have the right skills? Have you helped someone else with your particular project? What resources do you have? Tools? Money? Time? Are you ready to DIY was also discussed in regards to basements in Episode 16 Background on Handyguys Podcast How we got started Where we learned what we learned Some of our most successful projects Some of our project failures Some other online resources Tile – John Bridge Plumbing – Terry Love Electrical – EZ DIY Electricity Woodworking – The Wood Whisperer You can check out the article written By Joy Brown after... The Handyguys are interviewed by a local Ohio Newspaper. The Handyguys were interviewed by Joy Brown from the The Courier in Findlay Ohio. We recorded the interview and turned it into a podcast. Some of the topics covered in the interview: Spring repairs Gutters, repair or replacement Shingles Spring Time Home Inspection Check out the home inspection checklist as part of Episode 57 Are you ready for a DIY project? Do you have the right skills? Have you helped someone else with your particular project? What resources do you have? Tools? Money? Time? Are you ready to DIY was also discussed in regards to basements in Episode 16 Background on Handyguys Podcast How we got started Where we learned what we learned Some of our most successful projects Some of our project failures Some other online resources Tile – John Bridge Plumbing – Terry Love Electrical – EZ DIY Electricity Woodworking – The Wood Whisperer You can check out the article written By Joy Brown after the interview here http://www.thecourier.com/Issues/2009/Apr/19/ar_news_041909_story3.asp Thanks for listening. We will be back next week with more home improvement advice. As always, if you have any questions about you home just let us know. Click these icons to share, thanks: The Handyguys are interviewed by a local Ohio Newspaper. The Handyguys were interviewed by Joy Brown from the The Courier in Findlay Ohio. We recorded the interview and turned it into a podcast. Some of the topics covered in the interview: Spring repairs Gutters, repair or replacement Shingles Spring Time Home Inspection Check out the home inspection checklist as part of Episode 57 Are you ready for a DIY project? Do you have the right skills? Have you helped someone else with your particular project? What resources do you have? Tools? Money? Time? Are you ready to DIY was also discussed in regards to basements in Episode 16 Background on Handyguys Podcast How we got started Where we learned what we learned Some of our most successful projects Some of our project failures Some other online resources Tile – John Bridge Plumbing – Terry Love Electrical – EZ DIY Electricity Woodworking – The Wood Whisperer You can check out the article written By Joy Brown after the interview here http://www.thecourier.com/Issues/2009/Apr/19/ar_news_041909_story3.asp Thanks for listening. We will be back next week with more home improvement advice. As always, if you have any questions about you home just let us know. Click these icons to share, thanks: tag:odeo.com,2009-04-16,24834530 Thu, 16 Apr 2009 12:59:15 -0700 no Handyguys Podcast podcast, time, spring, DIY, home improvement, Success, failure, skills, home inspection, shingles, Handyguys Podcast Category, Gutters, Online Resources, repairs, The Handyguys, Joy Brown Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/25333832-Episode-59-%E2%80%93-What-to-do-when-you-leave-your-house-for-vacation The Handyguys discuss how to prepare your home when it is not in use! Brian and Paul first answer a question they received from Greg: Our home is about a year and a half old, and we have a problem with a smoke detector.  This particular detector is in the center of the downstairs area of the house, and directly above it is a carpeted hallway. All of the detectors in the house are fed by 120vAC with 9V battery backup.  They are also networked, for lack of a better term – when one alarms, they all alarm. The problem detector seems to have a false alarm whenever someone vacuums the carpet directly above it, when one of the cats is rolling around on the carpet above it, or when someone is dragging their feet on the carpet above. I’ve never heard of anything like this before with a smoke detector, but it seems to me that static electricity is causing some kind of interference.  Is there any way I can insulate or shield the detector without ripping apart a ceiling or floor? I&... The Handyguys discuss how to prepare your home when it is not in use! Brian and Paul first answer a question they received from Greg: Our home is about a year and a half old, and we have a problem with a smoke detector.  This particular detector is in the center of the downstairs area of the house, and directly above it is a carpeted hallway. All of the detectors in the house are fed by 120vAC with 9V battery backup.  They are also networked, for lack of a better term – when one alarms, they all alarm. The problem detector seems to have a false alarm whenever someone vacuums the carpet directly above it, when one of the cats is rolling around on the carpet above it, or when someone is dragging their feet on the carpet above. I’ve never heard of anything like this before with a smoke detector, but it seems to me that static electricity is causing some kind of interference.  Is there any way I can insulate or shield the detector without ripping apart a ceiling or floor? I’ve performed tests on the detector every 4-6 months, and it always functions properly then. This is a very interesting question.  Could the problem be caused by static electricity?  If so, how is that occurring?  The Handyguys discuss this and offer some troubleshooting techniques. Also, if you need a new Smoke Detector there are some great deals in our Amazon store . Have a worry free vacation by making sure you home will be as you left it. What to do when you leave your house for Vacation? Many of us enjoy a good vacation away from home at least once each year.  If we are fortunate, we have a trusted friend keep an eye on our property.  Even better, we have a house sitter live in the home to keep it operational.  But for the rest of us, we have to leave the house vacant and hope that the pipes do not burst.  And while we are gone, we don’t want to have to pay to heat or cool the place… or do we? The Handyguys discuss important matters to consider when you leave for vacation. The season and climate of your home effects how your prepare your house when you leave. In addition, different types of HVAC systems have different requirements when left untended. What if you are taking an extended vacation or leaving for a month or more? Listen to The Handyguys, follow their advice and have a happy, worry free less worry, vacation. Feel free to send us a postcard or tell us where you are going on vacation this year in the comments. The Handyguys discuss how to prepare your home when it is not in use! Brian and Paul first answer a question they received from Greg: Our home is about a year and a half old, and we have a problem with a smoke detector.  This particular detector is in the center of the downstairs area of the house, and directly above it is a carpeted hallway. All of the detectors in the house are fed by 120vAC with 9V battery backup.  They are also networked, for lack of a better term – when one alarms, they all alarm. The problem detector seems to have a false alarm whenever someone vacuums the carpet directly above it, when one of the cats is rolling around on the carpet above it, or when someone is dragging their feet on the carpet above. I’ve never heard of anything like this before with a smoke detector, but it seems to me that static electricity is causing some kind of interference.  Is there any way I can insulate or shield the detector without ripping apart a ceiling or floor? I’ve performed tests on the detector every 4-6 months, and it always functions properly then. This is a very interesting question.  Could the problem be caused by static electricity?  If so, how is that occurring?  The Handyguys discuss this and offer some troubleshooting techniques. Also, if you need a new Smoke Detector there are some great deals in our Amazon store . Have a worry free vacation by making sure you home will be as you left it. What to do when you leave your house for Vacation? Many of us enjoy a good vacation away from home at least once each year.  If we are fortunate, we have a trusted friend keep an eye on our property.  Even better, we have a house sitter live in the home to keep it operational.  But for the rest of us, we have to leave the house vacant and hope that the pipes do not burst.  And while we are gone, we don’t want to have to pay to heat or cool the place… or do we? The Handyguys discuss important matters to consider when you leave for vacation. The season and climate of your home effects how your prepare your house when you leave. In addition, different types of HVAC systems have different requirements when left untended. What if you are taking an extended vacation or leaving for a month or more? Listen to The Handyguys, follow their advice and have a happy, worry free less worry, vacation. Feel free to send us a postcard or tell us where you are going on vacation this year in the comments. tag:odeo.com,2009-04-02,25333832 Thu, 02 Apr 2009 14:00:23 -0700 no Handyguys Podcast podcast, Vacation, DIY, home improvement, cooling, furnace, AWAY, static, dust, Water heaters, heating, AC, Handyguys Podcast Category, Troubleshooting, smoke detector Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24398997-Episode-59-What-to-do-when-you-leave-your-house-for-vacation The Handyguys discuss how to prepare your home when it is not in use! Brian and Paul first answer a question they received from Greg: Our home is about a year and a half old, and we have a problem with a smoke detector.  This particular detector is in the center of the downstairs area of the house, and directly above it is a carpeted hallway. All of the detectors in the house are fed by 120vAC with 9V battery backup.  They are also networked, for lack of a better term - when one alarms, they all alarm. The problem detector seems to have a false alarm whenever someone vacuums the carpet directly above it, when one of the cats is rolling around on the carpet above it, or when someone is dragging their feet on the carpet above. I’ve never heard of anything like this before with a smoke detector, but it seems to me that static electricity is causing some kind of interference.  Is there any way I can insulate or shield the detector without ripping apart a ceiling or floor? I’... The Handyguys discuss how to prepare your home when it is not in use! Brian and Paul first answer a question they received from Greg: Our home is about a year and a half old, and we have a problem with a smoke detector.  This particular detector is in the center of the downstairs area of the house, and directly above it is a carpeted hallway. All of the detectors in the house are fed by 120vAC with 9V battery backup.  They are also networked, for lack of a better term - when one alarms, they all alarm. The problem detector seems to have a false alarm whenever someone vacuums the carpet directly above it, when one of the cats is rolling around on the carpet above it, or when someone is dragging their feet on the carpet above. I’ve never heard of anything like this before with a smoke detector, but it seems to me that static electricity is causing some kind of interference.  Is there any way I can insulate or shield the detector without ripping apart a ceiling or floor? I’ve performed tests on the detector every 4-6 months, and it always functions properly then. This is a very interesting question.  Could the problem be caused by static electricity?  If so, how is that occurring?  The Handyguys discuss this and offer some troubleshooting techniques. Also, if you need a new Smoke Detector there are some great deals in our Amazon store . Have a worry free vacation by making sure you home will be as you left it. What to do when you leave your house for Vacation? Many of us enjoy a good vacation away from home at least once each year.  If we are fortunate, we have a trusted friend keep an eye on our property.  Even better, we have a house sitter live in the home to keep it operational.  But for the rest of us, we have to leave the house vacant and hope that the pipes do not burst.  And while we are gone, we don’t want to have to pay to heat or cool the place… or do we? The Handyguys discuss important matters to consider when you leave for vacation. The season and climate of your home effects how your prepare your house when you leave. In addition, different types of HVAC systems have different requirements when left untended. What if you are taking an extended vacation or leaving for a month or more? Listen to The Handyguys, follow their advice and have a happy, worry free less worry, vacation. Feel free to send us a postcard or tell us where you are going on vacation this year in the comments. Click these icons to share, thanks: The Handyguys discuss how to prepare your home when it is not in use! Brian and Paul first answer a question they received from Greg: Our home is about a year and a half old, and we have a problem with a smoke detector.  This particular detector is in the center of the downstairs area of the house, and directly above it is a carpeted hallway. All of the detectors in the house are fed by 120vAC with 9V battery backup.  They are also networked, for lack of a better term - when one alarms, they all alarm. The problem detector seems to have a false alarm whenever someone vacuums the carpet directly above it, when one of the cats is rolling around on the carpet above it, or when someone is dragging their feet on the carpet above. I’ve never heard of anything like this before with a smoke detector, but it seems to me that static electricity is causing some kind of interference.  Is there any way I can insulate or shield the detector without ripping apart a ceiling or floor? I’ve performed tests on the detector every 4-6 months, and it always functions properly then. This is a very interesting question.  Could the problem be caused by static electricity?  If so, how is that occurring?  The Handyguys discuss this and offer some troubleshooting techniques. Also, if you need a new Smoke Detector there are some great deals in our Amazon store . Have a worry free vacation by making sure you home will be as you left it. What to do when you leave your house for Vacation? Many of us enjoy a good vacation away from home at least once each year.  If we are fortunate, we have a trusted friend keep an eye on our property.  Even better, we have a house sitter live in the home to keep it operational.  But for the rest of us, we have to leave the house vacant and hope that the pipes do not burst.  And while we are gone, we don’t want to have to pay to heat or cool the place… or do we? The Handyguys discuss important matters to consider when you leave for vacation. The season and climate of your home effects how your prepare your house when you leave. In addition, different types of HVAC systems have different requirements when left untended. What if you are taking an extended vacation or leaving for a month or more? Listen to The Handyguys, follow their advice and have a happy, worry free less worry, vacation. Feel free to send us a postcard or tell us where you are going on vacation this year in the comments. Click these icons to share, thanks: tag:odeo.com,2009-04-02,24398997 Thu, 02 Apr 2009 13:00:23 -0700 no Handyguys Podcast podcast, Vacation, DIY, home improvement, cooling, furnace, AWAY, static, dust, Water heaters, heating, AC, Handyguys Podcast Category, Troubleshooting, smoke detector Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24834531-Episode-59-%E2%80%93-What-to-do-when-you-leave-your-house-for-vacation The Handyguys discuss how to prepare your home when it is not in use! Brian and Paul first answer a question they received from Greg: Our home is about a year and a half old, and we have a problem with a smoke detector.  This particular detector is in the center of the downstairs area of the house, and directly above it is a carpeted hallway. All of the detectors in the house are fed by 120vAC with 9V battery backup.  They are also networked, for lack of a better term – when one alarms, they all alarm. The problem detector seems to have a false alarm whenever someone vacuums the carpet directly above it, when one of the cats is rolling around on the carpet above it, or when someone is dragging their feet on the carpet above. I’ve never heard of anything like this before with a smoke detector, but it seems to me that static electricity is causing some kind of interference.  Is there any way I can insulate or shield the detector without ripping apart a ceiling or floor? I&... The Handyguys discuss how to prepare your home when it is not in use! Brian and Paul first answer a question they received from Greg: Our home is about a year and a half old, and we have a problem with a smoke detector.  This particular detector is in the center of the downstairs area of the house, and directly above it is a carpeted hallway. All of the detectors in the house are fed by 120vAC with 9V battery backup.  They are also networked, for lack of a better term – when one alarms, they all alarm. The problem detector seems to have a false alarm whenever someone vacuums the carpet directly above it, when one of the cats is rolling around on the carpet above it, or when someone is dragging their feet on the carpet above. I’ve never heard of anything like this before with a smoke detector, but it seems to me that static electricity is causing some kind of interference.  Is there any way I can insulate or shield the detector without ripping apart a ceiling or floor? I’ve performed tests on the detector every 4-6 months, and it always functions properly then. This is a very interesting question.  Could the problem be caused by static electricity?  If so, how is that occurring?  The Handyguys discuss this and offer some troubleshooting techniques. Also, if you need a new Smoke Detector there are some great deals in our Amazon store . Have a worry free vacation by making sure you home will be as you left it. What to do when you leave your house for Vacation? Many of us enjoy a good vacation away from home at least once each year.  If we are fortunate, we have a trusted friend keep an eye on our property.  Even better, we have a house sitter live in the home to keep it operational.  But for the rest of us, we have to leave the house vacant and hope that the pipes do not burst.  And while we are gone, we don’t want to have to pay to heat or cool the place… or do we? The Handyguys discuss important matters to consider when you leave for vacation. The season and climate of your home effects how your prepare your house when you leave. In addition, different types of HVAC systems have different requirements when left untended. What if you are taking an extended vacation or leaving for a month or more? Listen to The Handyguys, follow their advice and have a happy, worry free less worry, vacation. Feel free to send us a postcard or tell us where you are going on vacation this year in the comments. Click these icons to share, thanks: The Handyguys discuss how to prepare your home when it is not in use! Brian and Paul first answer a question they received from Greg: Our home is about a year and a half old, and we have a problem with a smoke detector.  This particular detector is in the center of the downstairs area of the house, and directly above it is a carpeted hallway. All of the detectors in the house are fed by 120vAC with 9V battery backup.  They are also networked, for lack of a better term – when one alarms, they all alarm. The problem detector seems to have a false alarm whenever someone vacuums the carpet directly above it, when one of the cats is rolling around on the carpet above it, or when someone is dragging their feet on the carpet above. I’ve never heard of anything like this before with a smoke detector, but it seems to me that static electricity is causing some kind of interference.  Is there any way I can insulate or shield the detector without ripping apart a ceiling or floor? I’ve performed tests on the detector every 4-6 months, and it always functions properly then. This is a very interesting question.  Could the problem be caused by static electricity?  If so, how is that occurring?  The Handyguys discuss this and offer some troubleshooting techniques. Also, if you need a new Smoke Detector there are some great deals in our Amazon store . Have a worry free vacation by making sure you home will be as you left it. What to do when you leave your house for Vacation? Many of us enjoy a good vacation away from home at least once each year.  If we are fortunate, we have a trusted friend keep an eye on our property.  Even better, we have a house sitter live in the home to keep it operational.  But for the rest of us, we have to leave the house vacant and hope that the pipes do not burst.  And while we are gone, we don’t want to have to pay to heat or cool the place… or do we? The Handyguys discuss important matters to consider when you leave for vacation. The season and climate of your home effects how your prepare your house when you leave. In addition, different types of HVAC systems have different requirements when left untended. What if you are taking an extended vacation or leaving for a month or more? Listen to The Handyguys, follow their advice and have a happy, worry free less worry, vacation. Feel free to send us a postcard or tell us where you are going on vacation this year in the comments. Click these icons to share, thanks: tag:odeo.com,2009-04-02,24834531 Thu, 02 Apr 2009 13:00:23 -0700 no Handyguys Podcast podcast, Vacation, DIY, home improvement, cooling, furnace, AWAY, static, dust, Water heaters, heating, AC, Handyguys Podcast Category, Troubleshooting, smoke detector Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/25333833-Episode-58-%E2%80%93-The-Home-Owners-Instruction-Manual Knobs, switches and valves The Handyguys provide an operations manual for your home. When you buy a new piece of cool electronic gear, you get an owners manual that you can refer to when you need help.  Unfortunately, your house—the biggest purchase you may ever make—doesn’t come with a manual. The Handyguys discuss all the typical switches, valves, knobs and buttons you may find in your home.  Disaster can be averted by reviewing the location and operation of all of these devices.  An ounce of prevention will prevent a 8000 pounds of water leaking out of your toilet! Since you don’t have a home owners manual, you can listen to our mini audio manual. Some of the items discussed in this podcast: Shutoff valves (know where they are and make sure you can turn them!) Washer valves GFCI outlets Furnace on/off switch Main water shut-off Electrical Breakers Fuses Radon mitigation status indicator Gas valves Other items If you have any questions about any mysterious switches, va... Knobs, switches and valves The Handyguys provide an operations manual for your home. When you buy a new piece of cool electronic gear, you get an owners manual that you can refer to when you need help.  Unfortunately, your house—the biggest purchase you may ever make—doesn’t come with a manual. The Handyguys discuss all the typical switches, valves, knobs and buttons you may find in your home.  Disaster can be averted by reviewing the location and operation of all of these devices.  An ounce of prevention will prevent a 8000 pounds of water leaking out of your toilet! Since you don’t have a home owners manual, you can listen to our mini audio manual. Some of the items discussed in this podcast: Shutoff valves (know where they are and make sure you can turn them!) Washer valves GFCI outlets Furnace on/off switch Main water shut-off Electrical Breakers Fuses Radon mitigation status indicator Gas valves Other items If you have any questions about any mysterious switches, valves, buttons please let us know. Knobs, switches and valves The Handyguys provide an operations manual for your home. When you buy a new piece of cool electronic gear, you get an owners manual that you can refer to when you need help.  Unfortunately, your house—the biggest purchase you may ever make—doesn’t come with a manual. The Handyguys discuss all the typical switches, valves, knobs and buttons you may find in your home.  Disaster can be averted by reviewing the location and operation of all of these devices.  An ounce of prevention will prevent a 8000 pounds of water leaking out of your toilet! Since you don’t have a home owners manual, you can listen to our mini audio manual. Some of the items discussed in this podcast: Shutoff valves (know where they are and make sure you can turn them!) Washer valves GFCI outlets Furnace on/off switch Main water shut-off Electrical Breakers Fuses Radon mitigation status indicator Gas valves Other items If you have any questions about any mysterious switches, valves, buttons please let us know. tag:odeo.com,2009-03-26,25333833 Thu, 26 Mar 2009 14:00:48 -0700 no Handyguys Podcast podcast, home improvement, fuse, Handyman, water heater, furnace, electrical, Radon, Handyguys Podcast Category, breaker, valves, gas valve, Shut-off, GFCI, outlets Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24385466-Episode-58-The-Home-Owners-Instruction-Manual Knobs, switches and valves The Handyguys provide an operations manual for your home. When you buy a new piece of cool electronic gear, you get an owners manual that you can refer to when you need help.  Unfortunately, your house—the biggest purchase you may ever make—doesn’t come with a manual. The Handyguys discuss all the typical switches, valves, knobs and buttons you may find in your home.  Disaster can be averted by reviewing the location and operation of all of these devices.  An ounce of prevention will prevent a 8000 pounds of water leaking out of your toilet! Since you don’t have a home owners manual, you can listen to our mini audio manual. Some of the items discussed in this podcast: Shutoff valves (know where they are and make sure you can turn them!) Washer valves GFCI outlets Furnace on/off switch Main water shut-off Electrical Breakers Fuses Radon mitigation status indicator Gas valves Other items If you have any questions about any mysterious switches, va... Knobs, switches and valves The Handyguys provide an operations manual for your home. When you buy a new piece of cool electronic gear, you get an owners manual that you can refer to when you need help.  Unfortunately, your house—the biggest purchase you may ever make—doesn’t come with a manual. The Handyguys discuss all the typical switches, valves, knobs and buttons you may find in your home.  Disaster can be averted by reviewing the location and operation of all of these devices.  An ounce of prevention will prevent a 8000 pounds of water leaking out of your toilet! Since you don’t have a home owners manual, you can listen to our mini audio manual. Some of the items discussed in this podcast: Shutoff valves (know where they are and make sure you can turn them!) Washer valves GFCI outlets Furnace on/off switch Main water shut-off Electrical Breakers Fuses Radon mitigation status indicator Gas valves Other items If you have any questions about any mysterious switches, valves, buttons please let us know. Click these icons to share, thanks: Knobs, switches and valves The Handyguys provide an operations manual for your home. When you buy a new piece of cool electronic gear, you get an owners manual that you can refer to when you need help.  Unfortunately, your house—the biggest purchase you may ever make—doesn’t come with a manual. The Handyguys discuss all the typical switches, valves, knobs and buttons you may find in your home.  Disaster can be averted by reviewing the location and operation of all of these devices.  An ounce of prevention will prevent a 8000 pounds of water leaking out of your toilet! Since you don’t have a home owners manual, you can listen to our mini audio manual. Some of the items discussed in this podcast: Shutoff valves (know where they are and make sure you can turn them!) Washer valves GFCI outlets Furnace on/off switch Main water shut-off Electrical Breakers Fuses Radon mitigation status indicator Gas valves Other items If you have any questions about any mysterious switches, valves, buttons please let us know. Click these icons to share, thanks: tag:odeo.com,2009-03-26,24385466 Thu, 26 Mar 2009 13:00:48 -0700 no Handyguys Podcast podcast, home improvement, fuse, Handyman, water heater, furnace, electrical, Radon, Handyguys Podcast Category, breaker, valves, gas valve, Shut-off, GFCI, outlets Home Tool Reviews DIY, Improvement, http://www.odeo.com/episodes/24834532-Episode-58-%E2%80%93-The-Home-Owners-Instruction-Manual Knobs, switches and valves The Handyguys provide an operations manual for your home. When you buy a new piece of cool electronic gear, you get an owners manual that you can refer to when you need help.  Unfortunately, your house—the biggest purchase you may ever make—doesn’t come with a manual. The Handyguys discuss all the typical switches, valves, knobs and buttons you may find in your home.  Disaster can be averted by reviewing the location and operation of all of these devices.  An ounce of prevention will prevent a 8000 pounds of water leaking out of your toilet! Since you don’t have a home owners manual, you can listen to our mini audio manual. Some of the items discussed in this podcast: Shutoff valves (know where they are and make sure you can turn them!) Washer valves GFCI outlets Furnace on/off switch Main water shut-off Electrical Breakers Fuses Radon mitigation status indicator Gas valves Other items If you have any questions about any mysterious switches, va... Knobs, switches and valves The Handyguys provide an operations manual for your home. When you buy a new piece of cool electronic gear, you get an owners manual that you can refer to when you need help.  Unfortunately, your house—the biggest purchase you may ever make—doesn’t come with a manual. The Handyguys discuss all the typical switches, valves, knobs and buttons you may find in your home.  Disaster can be averted by reviewing the location and operation of all of these devices.  An ounce of prevention will prevent a 8000 pounds of water leaking out of your toilet! Since you don’t have a home owners manual, you can listen to our mini audio manual. Some of the items discussed in this podcast: Shutoff valves (know where they are and make sure you can turn them!) Washer valves GFCI outlets Furnace on/off switch Main water shut-off Electrical Breakers Fuses Radon mitigation status indicator Gas valves Other items If you have any questions about any mysterious switches, valves, buttons please let us know. Click these icons to share, thanks: Knobs, switches and valves The Handyguys provide an operations manual for your home. When you buy a new piece of cool electronic gear, you get an owners manual that you can refer to when you need help.  Unfortunately, your house—the biggest purchase you may ever make—doesn’t come with a manual. The Handyguys discuss all the typical switches, valves, knobs and buttons you may find in your home.  Disaster can be averted by reviewing the location and operation of all of these devices.  An ounce of prevention will prevent a 8000 pounds of water leaking out of your toilet! Since you don’t have a home owners manual, you can listen to our mini audio manual. Some of the items discussed in this podcast: Shutoff valves (know where they are and make sure you can turn them!) Washer valves GFCI outlets Furnace on/off switch Main water shut-off Electrical Breakers Fuses Radon mitigation status indicator Gas valves Other items If you have any questions about any mysterious switches, valves, buttons please let us know. Click these icons to share, thanks: tag:odeo.com,2009-03-26,24834532 Thu, 26 Mar 2009 13:00:48 -0700 no Handyguys Podcast podcast, home improvement, fuse, Handyman, water heater, furnace, electrical, Radon, Handyguys Podcast Category, breaker, valves, gas valve, Shut-off, GFCI, outlets Home Tool Reviews DIY, Improvement,